SPECIAL REPAIR TO CERTAIN BLDGS OF OLD GE P OFFICE AT RIDGE ROAD JABALPUR UNDER GE P NO 1 JABALPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

Dimantling Single layer Mangalore pattern or similar tiles in roofing etc coplete all as specified and directed.

Dismantling posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dimantling asbestos cement sheeting, corrugated or semi corrugated or similar pattern roof coverings complete all as specified and directed.

Dismantling of Battens for tiles, shingles etc, of any size including tilting fillets exc 15 cm complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed works complete all as specified and directed.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 mtr in depth for fdn n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out any type of soil complete all as specified and directed.

Demolition/Dismantling and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L vetrified ceremic tiles double charge 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile n. exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in cement to match tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

~Ditto~ all as per srl item No. 14 abobe but in skirting/dadoand verticle surface with rendering 10 mm thick CM 1:4 complete all as specified and directed.

M&L vetrified ceremic tiles double charge 10 mm thick, in dark shade, (Square/rectangular) polished, area of each tile exceeding 0.42 sqm but n. exc 1.00 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

~Ditto~ all as per srl item No. 16 abobe but in skirting/dadoand verticle surface with rendering 10mm thick CM 1:4 complete all as specified and directed.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick rendering in CM 1:6 complete all as specified and directed.

S&F 10 mm thick vitrified paver tiles out door non skid area n. exc 0.36 sqm each as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:6) complete all as specified and directed.

M & L coloured Glazed ceramic tiles in vertical serfaces 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L 15mm thick plaster in CM 1:4 on brick wall finished even & smooth without using extra cement in patches complete all as specified and directed.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L 3 mmThick for applying one or more layer of wall care putty cement based on wall/ceiling including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spots complete all as specified and directed.

M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new or old surfaces work complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparation of old wall surfaces including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying two coat of white wash complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old decorated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

M&L for one coat of synthetic enamel paint on old decorative surfaces of steel over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position complete all as specified and directed.

S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

M& L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedt complete all as specified and directed.

M & L providing, cement concrete type B1 1:2:4 (20 mm graded aggregatet) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M & L in repair suspended false ceiling system using chicago metallic (E grid) exposed suspended system grid section size 600mmx600mm comprising of GI powder coated main runner of dimension 39mmx24mmx0.8mm thick (Thickness comprising of GI /0.4+PPPCGs/).3mm weight of runner 1.35kg for 3600mm length) cross tee of dimension 29mmx24mmx.8mm thick and thick wall angle 22.2mmx22.2mmx0,65mm Thickness comprising of GI /0.35+PPPCGS/0.30mm & weight of angle 0.70 kg for 3050mm length) with and including 4 mm thick HPSC high pressure stem curved) pre primed ,self embossed textured designer board water resistant termite resistent fire resistent for insulation and accoustic to be plased in the grid system duly suspended with 4 mm gi bar hanger fixed with steel dash through fasteners form purlin of the roof with butterfly clips(Wt-0.007kg/clip) hold down clip ( Wt-0.0035kg/clip) with provn of light fixure complete all as specified and direted

Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed.

Taking down chowket or frame with shutter (without taking of shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and directed.

Taking down Shutter exc. 1 sqm and not exc. 2 sqm each complete all as specified and directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed.

Supply only floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style)wire gauge i.e panel will be wire gauge in lieu of single side prelam PVC sheet panel . The wire gauge shell be wrapped on an additional square 8 mm MS solid tube the wire gauge strightly and tighted firmly, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed.

S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed.

S&F alluminum alloy, anodised, sliding door bolt with hasp & staple (bolt type) and length of 300 mm long etc complete all as specified and directed.

S&F 100mm long butt hinges med wt cold rolled mild steel and fixed complete all as specified and directed.

S & F powder coated (min thickness of powder coating 50 micorn) Aluminium door,window,ventilator frame with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and directed.

S&F powder coated aluminum window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 Kg/ Rm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. including making good to the disturbed surfaces complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and galzing with necessory rubber beading of any size complete as in aluminium windows/ventilators complete all as specified and directed.

S&F 3 mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares each pane complete all as specified and directed.

Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

~Ditto~ all as per srl item No. 56 abobe but 8mm dia TMT bars as in distribution bars / Stirrups etc complete all as specified and directed.

M&L RCC type B 1, 1:2:4 (20mm graded agg) as in Beams, cantilevers, bressummers, lintels over 1.5m span columns, pillars, piers, posts, slab, chajja, footing etc

Use and waste of formwork to sides and soffits of floor or roof beams, beam aunchings,girders,bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for Cement concrete type D-2 1:4:8 (using 20 mm graded aggregate) as in foundation filling and mass concrete , sub base complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for rubble random rubble uncoursed well bounded bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L for flush pointing to RR masonry walling brought up to course in CM 1:4 complete all as specified and directed.

M&L 150mm Reinforced concrete pipes, class NP2, laid , jointed and testing complete all as specified & directed.

M&L for Concretetype C2 1:3:6 to bed to drain pipes packing under,and haunching against the sides of pipes after they are laid and tested;in 150 mm dia complete all as specified and directed

M & L 75mm th PCC 1:3:6 type C-1 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L Granite (of any type ) slab/tiles as cooking platform/shelf 16-18mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and cutting of holes for gas pipe complete all as specified and directed.

S & F in repair Pillar taps 15mm fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed..(Make-Parryware(Cat No-0252 or eqv /Hindware//Prayag) complete all as specified and directed.

S&F in repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repair Vitreous china WHB 550x400mm including cutting pinning in end of brackets brackets , fixing flat back or an le back type with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etc fixed in repair complete all as specified and directed.

S&F in repair Vitreous china ovel type WHB 550x400mm including with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etc fixed in repair complete all as specified and directed.

S & F in repair for Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed, 15 mm, fancy type, chromium plated fixed complete all as specified and directed.

S&F in repair for Sheet corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.(Make-Parryware( T6909A1) or eqv/Prayag/Hindware) complete all as specified and directed.

S&F in repair Chromium plated toilet paper holder including fixing arrangement complete all as specified and directed.

S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed.(Make-Parryware( T6003A1) or eqv/Prayag/Hindware).

S & F in repair for fency type chromium plated Stop valves,(angle Cock) cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete all as specified and directed.

S & F in repair for Gun-metal, globe or gate valves, with lever head/iron wheel head, screwed both ends for iron pipe and fixed , 20 mm fixed complete all as specified and directed.

S & F in repair for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed.

S&F in repar PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed.

S & F in repair for Grating doom 100 mm dia of chromium plated (Minimum weight 25gms) fixed complete all as specified and directed.

S&F in repair for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed complete all as specified and directed.

S&F in repair Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.

S&F in repairTowel Rail 600mm long of PTMT/SS fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) fixed complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 25mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe complete all as specified and directed.

Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls incl clamps and necessary fittings complete all as specified and directed.

S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S & F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed.

PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and directed.

PVC (SWR) floor trap / Nahani trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and directed.

S&F framed work such as grills, gratings and holdfasts etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

M&L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 complete all as specified and directed.

M&L for Brickwork with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/ septictank/ soakwell etc. in sewer works built in CM 1:4 complete all as specified and directed.

M&L for Providing precast cement concrete in type B1 1:2:4 using 20 mm graded stone aggregate as cover slab of man hole , cover slab of septic tank soakage pit cover etc lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings.kneelers, apex stones, pier caps,columns, posts,boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling).corbels,brackets,etc. (of any section indicated), with plain fair faces,including chamfers,weatherings,throat- ing etc. and setting in mortar omplete with joints to match complete all as specified and directed.

Removing of excavated materials n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator,light fittings etc., complete and all as specified & directed by Engineer-in-Charge.

M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal rectangular terminal boxes of suitable size and modular white cover plates suitable for mounting modular switches, sockets etc and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces all as specified & directed by Engineer-in-Charge.

~Ditto~ all as per srl item No. 107 here in before for bell point wiring controlled by one bell push.

~Ditto~ all as per srl item No. 107 here in before but with one 3 pin, 5 amps, socket outlet on the same board.

~Ditto~ all as per srl item No. 107 here in before but with one 3 pin, 5 amps socket outlet on independent board.

~Ditto~ all as per srl item No. 107 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified & directed.

~Ditto~ all as per srl item No. 107 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 4 Sqmm main & with 4 Sqmm earth multi-strand copper conductor cable as earth wire complete all as specified & directed.

M&L of Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified & directed. Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable shall be measured as one unit run.

Supply and fix modular switch type 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as specified & directed.

Supply and fix modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps,2 module flush type, ISI marked complete all as specified & directed.

Supply and fix switch modular 16 amps, flush type, ISI marked complete all as specified & directed.

Supply and fix modular socket 2/3 pin combined, 6/16 amps 2 module, flush type, ISI marked complete all as specified & directed.

Supply and fix modular bell push, 1 module, 6 amps, complete all as specified & directed.

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed. Make: Legrand cat no :5078 11 or equivalent in SEIMENS /L&T (L&K) SCHNEIDER /SEIMENS

Supply and fixing bell AC 230 volts, single pole complete all as specified & directed.

Supply & fixing modular metal flush box 1/2 Module all as specified and directed.

Supply & fixing modular metal flush box 3 Module all as specified and directed.

Supply & fixing modular metal flush box 6 Module all as specified and directed.

Supply & fixing modular metal flush box 8 Module all as specified and directed.

Supply & fixing modular white cover with frame plate 1 Module all as specified and directed.

Supply & fixing modular white cover with frame plate 2 Module all as specified and directed.

Supply & fixing modular white cover with frame plate 3 Module all as specified and directed.

Supply & fixing modular white cover with frame plate 6 Module all as specified and directed.

Supply & fixing modular white cover with frame plate 8 Module all as specified and directed.

Supply and fixing ceiling rose surface bakelite, three terminal complete all as specified & directed.

Supply and fixing in repair LED 12 watts recessed/surface mounted downlighter spotlight fitting, 110 lumen per watts, decorative type with all accessaries and proper connection from fitting to existing point as per site requirement and making the surface smooth complete all as specified. Make : Philips cat no: SM250/260 LED12S 6500 PSU WH or GENERAL ELECTRIC (GE)/BAJAJ/CROMPTON

Supply & Fixing in repair Smart bright Batten Series, LED luminaire using LEDs 22 watt, natural white, 2200 Lumen, THD max 10 % ,CRI min 80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification Make : Philips Cat part BN 021C LED 22S PSU CW GR or GENERAL ELECTRIC (GE)/BAJAJ/CROMPTON

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type, as directed, with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified. Make: Philips cat no :RC380B LED36S-6500 G6 L60W60 PSU OD S1 or GENERAL ELECTRIC (GE)/BAJAJ/CROMPTON

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed. Make: Philips cat part no :BN 021 LED12S 6500 PSU GR or GENERAL ELECTRIC (GE)/BAJAJ/CROMPTON

Supply and fixing in repair LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified & directed. Make: Philips cat part no BRP331 LED36 CW R5N PC PSU S1 V1 or GENERAL ELECTRIC (GE)/BAJAJ/CROMPTON

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

Supply and fix LED lamp 9W LED bulb,230 V complete all as specified & directed.

Supply and fix modular telephone socket, one module, ISI marked complete all as specified & directed by Engineer-in-Charge.

Supply and fix modular RJ45 cat6 Data socket, one module,10 A,single pin ISI marked complete all as specified & directed by Engineer-in-Charge.

Supply and fix modular stepped type electronic fan regulator flush type, two module on the existing phenolic laminated etc., as required, single pole, 240 volts, grade 120W watts, 2 Module heavy duty and ISI marked complete all as specified & directed.

Taking down old fan/Exhaust fan any type/size complete with all accessories and refixing after minor repairs & cleaning all as specified & directed.

S&F in replacement sheet metal enclosure MCB DB double door [Acrylic], Triple pole and neutral, 440 volts, 4 way with 200 Amp, 10 KA breaking capacity rated copper bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed. Make:Legrand Cat no :5077 80 or Eq in SEIMENS/GE/ SCHNEIDER / L&T (L&K)

S&F in replacement MCB Triple Pole and Neutral 63 Amps,415 V,10KA, 'C' series breaking capacity complete all as specified & directed. Make: Legrand cat no :4086 83 or eq in SEIMENS /GE/ ABB/L&T (L&K)/ SCHNEIDER

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed. Make: Legrand cat no :5076 21 or eq in SEIMENS /GE/ ABB/L&T (L&K)/ SCHNEIDER

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 4 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed. Make: Legrand or eq in SEIMENS /GE/ ABB/L&T (L&K)/SCHNEIDER

S&F in replacement MCB Single Pole and Neutral 240 Volt, 40 Amps, 'C' series,10KA breaking capacity complete all as specified & directed. Make:Legrand cat no :4086 18 or eq in SEIMENS /GE/ ABB/L&T (L&K)/ SCHNEIDER

S&F in replacement MCB Single Pole 240 Volt, upto 40Amps,10KA breaking capacity complete all as specified & directed. Make: Legrand cat no :4086 90/92/93/94/95/96 or eq in SEIMENS /GE/ ABB/L&T (L&K)/ SCHNEIDER

Supply and fix rigid non metallic, medium grade, PVC conduit, concealed type of size 25 mm with all accessaries such as couplers, lock nuts, saddles, pipe hook, tees, bends, etc., including cutting chases for conduits and making good the disturbed surface with PCC as per site requirement complete all as specified & directed.

Taking down old unserviceable Sub main wiring with aluminium/copper conductor, any type/size complete with/without conduit and remove from site all as specified & directed.

Taking down old unserviceable DBs/Main switches/earth plug socket any type/size complete with all accessories and remove from site all as specified & directed.

S&F in replacement of sheet steel enclosure distribution boards, double door factory made VTPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB 100 amps and MCB TP 63 A -02 Nos,MCB SP -04 Nos circuits comprising of 3 phase 4 wire of suitable rating all as specified and directed. Make of Distribution Board Legrand cat no:5077 50 or equivalent in seimens /GE and Make of MCBs :Legrand/Seimens/GE

Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on completion all as specified & directed. Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate.

Supply & Fixing in repairs Change Over Switch, On load, with front handle operaion, 4 Pole, 250 Amps capacity, 415 Volt, in sheet steel enclosure, weather/vermin proof, outdoor type, with front side hinged double door with locking arrangement complete and fixing on wall or any indicated position using suitable fixing accessories, including dismantling and taking out old u/s Change over switch and remove from site reconnecting existing LT Cables with new Change over switch complete all as directed.

S&F in repair earth continuity conductor or main earth lead of 4 mm GI with saddles and fixing screw etc for roof conductor and down conductor fixed to wall on batten or recess or ground for connecting earthing to various equipments as required complete all as directed.

Deduct schedule of credit amount Rs. 1,79,455.00 to be deducted during AOC

DOBARIA BUILDCON (BID ID -3301723)

ANAMIKA CONSTRUCTION (BID ID -3301581)

M/S Modern builders (BID ID -3305518)

C L BHATIA (BID ID -3301823)

RAVINDRA ELECTRICAL (BID ID -3307011)

Kirti Chandeliya and Assosicates (BID ID -3302027)