REPAIR AND MAINTENANCE OF FURNITURE AT AIR FORCE STATION JAIPUR

Amount

ALMIRAH LARGE STEEL WITH SHELVES FD-1031 Locks :- M&L for Removing unserviceable locks and S&F lock (Make : Godrej) 6 lever as per drg.

CHAIR VERANDAH FD-256 Re-canning to seat and back of chair with plastic cane. Note:- The rate quoted by tenderer includes taking down of cane complete.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint.

CHAIR CB STEEL WITH ARM FD-75(M) M&L for MS cleats 20x30x65mm wide weld to existing frame for fixing the seat and back.

Removing old u/s frame seats and S&F new frame seats

Removing old u/s frame back and S&F new frame back.

M&L for 2nd class Hard Wood Handle.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint.

CHAIR REVOLVING/CHAIR COMPUTER - FD/E6/MAP/01 Seat & Back: M&L for Removing the existing old unserviceable seat and back from the chair and re-upholstering with new Fabric containing material like Acrylic, Polyester, Poly viscose Poly propylene of colure as approved by AGE(I) on PU foam of 50mm 50 density fixed over 12mm BWR plywood all as specified on drg and as directed by Engr in Charge.

Castor Wheel : M&L for Removing the existing unserviceable or broken castor wheel and S&F of New Castor wheel to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

Handle : M&L for Removing the existing broken/ unserviceable handle from the chair and S&F new handlemade out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

Bottom Base : M&L for Removing the existing unserviceable or worn out bottom base from the Chair and Supply and fix new Base to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

Gas lifting hydraulic System : M&L for Removing of old/us gas lift and providing new gas lift maintenance free, environmental friendly chrome free cylinder tube shall be fixed in a MS black powder coated into centre column tube 38mm dia and 2mm thick, It shall have 100mm stroke length and gas pressure of 300 force all as specified in drg and directed by Engr-in-charge.

CHARPOY GI PIPE - FD-220 Removing old u/s top and S&F plywood (Make: Greenply/Century/ Duro/Kitply/Archidply) top of size 1930X900MM, 12mm thick BWR Grade ISI Marked confirming to IS-303 of Charpoy with Hard top made to shape & size as shown on drawings, complete all as specified and directed by GE. Also, 12x6mm thick half round teak wood beading shall be provided alround the edges of plywood with suitable adhesive and headless nails.

Removing/taking down existing nylon newar from G.I. pipe charpoys and tightening of loose components of Charpoy GI pipe before weaving with and including approved new white or light colour nylon newar (not made out of recycled nylon) 50/55 mm wide, closely knitted on both sides and end of newar stiched around, weight of newar in each charpoy not less than 1.5 kg complete all as specified in drawing and directed by Engr-in-Charge

Replacement of old u/s nuts & bollts 65 mm long , 5mm dia semi circular top with nuts & two washer complete all as specified and directed

TABLE OFFICE CLERK STEEL FD-1004 Removing old u/s top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis/Action Teesa) ISI marked confirming to IS-14587 Grade-I with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Removing old u/s drawers and S&F new drawer made out of 1 mm thick MS Sheet as directed by Engr in Charge.

Removing old u/s locks of drawer and S&F brass locks of any type 5 lever as per drg.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint.

TABLE BED SIDE FD/E6/MAP/15(R) Removing old u/s top and S&F new Top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis/Action Teesa) ISI marked confirming to IS-14587 Grade-I with 6mm half round teak wood beading with fevicol and headless nails all round the edges.all as specified on drg and as directed by Engr in Charge.

Removing old u/s top drawer and S&F new Top drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis/Action Teesa) ISI marked confirming to IS-14587 Grade-I of with front side with 12mm BWR grade plywood in three sides and 6mm BWR plywood as bottom along with Chromium Plated handles with as specified and shown on drg .

Removing old u/s bottom drawer and S&F new bottom drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis/Action Teesa) ISI marked confirming to IS-14587 Grade-I with front side with 12mm BWR grade plywood in three sides and 6mm BWR plywood as bottom along with Chromium Plated handles as specified and shown on drg.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint.

TABLE COMPUTER - FD/E6/MAP/03 Removing old u/s top and S&F new Top made of 18/19mm thick Prelaminated MDF Board exterior grade (make Greenlam/Century) ISI marked confirming to IS-14587 Grade-I with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Removing old u/s Shelves/bottom/drawer and S&F new shelves/bottom drawer made of 18/19 mm thick prelaminated MDF Board (Make : Greenlam/Century) ISI marked confirming to IS-14587 Grade-I, Type-II with telescopic chanel as directed by Engr-in-Charge

Removing old u/s side/partion and S&F new Side/partion made of 18/19 mm thick prelaminated MDF Board.all as specified on drg and as directed by Engr in Charge..

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint.

Almirah Med steel with shelves FD-1032 Supply new Almirah med steel with shelves as per drawing No.- FD-1032

Bed Hard - (FD/E6/MAP/08 (R )) Supply new Bed Hard as per drawing No. - FD/E6/MAP/08 (R )

Bed Hard FD-247, 246 Supply and fixing the following new parts after removing broken parts including tightening with screw other members of bed complete all as specified ans shwon on drg. Ply top 12mm thick of size bed hard complete 1950 x 900 mm. (BWR) as per IS-303 (07 ply) of commercial general purpose

Long rail of shisham wood of size 100mm x 50mm x 1980mm as specified in drawing.

Fixing only short rail after cutting to required length from old retrieved long rail as specified in drawing.

Ply wood 3mm thick teak faced to the direct vision of head rest and ply wood commercial 3 mm thick to other side including 4mm thick shisham wood edging all around.

All as per serial item No. 34 here-in-before but to foot rest as specified in drawing.

S&F Steel bent clamp for corner.

Tightening of all part of Bed Hard and French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Chair Dining FD-279 : Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair dining complete and all as specified and shown on drg. Stiffener (one large piece and two small piece) of size as Shown on drg

Removing of old unserviceable plastic cane from chair dining including recaning with new cane of white colour of size 3 mm wide and 0.60 mm thick (flat) alround for border of seat and 2 mm wide and 0.40 mm thick half round for remaining portion.

Tightening of all part of chair dining & French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Chair easy FD-229 : Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair easy complete and all as specified and shown on drg. Stiffener (one large piece and two small piece) of size as Shown on drg

Removing of old unserviceable plastic cane from chair easy including recaning with new cane of white colour of size 3 mm wide and 0.60 mm thick (flat) alround for border of seat and back and 2 mm wide and 0.40 mm thick half round for remaining portion.

S&F Arms of size as shown on drg

Tightening of all part of chair easy and French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Chair Writing FD-280 : Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair easy complete and all as specified and shown on drg. Stiffener (one large piece and two small piece) of size as Shown on drg

Removing of old unserviceable plastic cane from chair writing including recaning with new cane of white colour of size 3 mm wide and 0.60 mm thick (flat) alround for border of seat and 2 mm wide and 0.40 mm thick half round for remaining portion.

S&F Arms of size as Shown on drg

Tightening of all part of chair writing & French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

SOFA SET 5 SEATER FD-373 Tightening of all part of sofa set 5 seater and french polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table 3’ x 2 ‘ (900 x 600 x760 mm) with drawer and without drawer FD-283 and 284 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top new made of Pre laminated particle board exterior grade (Made: Green panelmax/Duro/Action teesa/Asis) with teak face both side of size 900 x 600 x 18mm thick with 06 mm thick half raound teak wood beading with fevicol and headless nails shall be provided all round.

S&F Short/long stiffeners as specified in drawing.

S&F Drawers complete as specified in drawing.

Tightening of all part of Table 3' x 2' and French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Centre (900 x 450 mm) FD-274 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top new made of pre laminated particle board exterior grade (Made: Green panelmax/Duro/Action teesa/Asis) with teak face both side of size 900 x 450 x 18mm thick with 06 mm thick half raound teak wood beading with fevicol and headless nails shall be provided all round as specified in drawing.

Tightening of all part of Table centre and French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Sofa Set 5 Seater FD-373 Supply new Sofa set 5 Seaters as pe drawing No. - FD-373

ANKIT BUILDERS

shree shyam enterpises