Development of Kunbi Craft Handloom Village under Survey No. 25/2 and 26/3 of Ugem Salaulim Village Sanguem Taluka, South Goa

Amount

Civil Works

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area

Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads : Beyond 60 cm and upto 120 cm girth

Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads : Beyond 120 cm and upto 240 cm girth

Earthwork in excavation Over Areas for all leads & lifts in all type of strata comprising of any type of materials either in full or part as the case may be adopting any method/methods as may be convenient as permitted excluding blasting in all conditions such as dry, moist, foul, saturated, submerged, etc,. including dressing of sides, planking & strutting, timbering ,ramming of bottom ,pumping and bailing out water ,barricading danger lighting guarding, getting out excavated soil & stacking as directed by Engineer for all leads & lifts etc. complete

Earthwork in excavation in trenches for all leads & lifts in all type of strata comprising of any type of materials either in full or part as the case may be adopting any method/methods as may be convenient as permitted excluding blasting in all conditions such as dry, moist, foul, saturated, submerged, etc,. including dressing of sides, planking & strutting, timbering ,ramming of bottom ,pumping and bailing out water ,barricading danger lighting guarding, getting out excavated soil & stacking as directed by Engineer for all leads & lifts etc. complete

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete Moorum.

Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in cm. 1 : 5 (1 cement : 5 coarse sand) in foundation upto plinth level In foundation and plinth

Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.

Pre-cast cement concrete solid blocks masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in partition walls size of blocks (30 x 20 x 10) In Super structure up to floor five level

Rubble packing with hard laterite stone under floor made available from excavation at site, under floors including watering, ramming and consolidating etc. in pipeline trenches and other foundations. Complete

Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level

Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing & laying damp proof course 25 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg. 10 mm nominal size).

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All work up to Plinth level

Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.for Moulding as in cornices, window sills, lintels etc. exceeding 15 cm in girth.

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement conrete by using 410kg of cement per cu.m. of concrete. All works upto floor V level. M-25grade of concrete

Centering and shuttering including strutting, propping, & removal of form for Foundation, footings, bases of columns

Centering and shuttering including strutting, propping, & removal of form for Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)

Centering and shuttering including strutting, propping, & removal of form for Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

Centering and shuttering including strutting, propping, & removal of form for Suspended floors, roofs, landings, shelves & their supports

Centering and shuttering including strutting, propping, & removal of form for Domes, vaults, shell roofs having curved surface in both the directions.

Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates: Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. Minimum Grade of Steel - Fe 500

Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m,for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured)

Applying a coat of hot bitumen (maxphalt 80/100 or equivalent) using 1.5 kg/sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth light soaked in bitumen.

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position. First class matti wood..

Providing and fixing position 62 mm thick double skin partition with frame in size 75 x 38 mm and internal frame of 50 mm x 38mm and fixing of 12 mm thick flat pressed melamine faced three layered prelaminated wood based particle board with exterior grade BWP /BWR synthetic resin as per IS-3087 (1985) type I on the edges of Navopan make or equivalent. One side shade of approved lamination and other side white balancing lamination Nano / equivalent

Providing flat iron hold fast 40 mm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. 40 x 3 mm flat iron hold fast 15 cm long

Providing and fixing First class matti wood moulded beading to door and window frames with iron screws , plugs and priming coat on unexposed surfaces etc. 15 x15mm size.

Providing & fixing flush door shutters decoration type core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains and cross bands and face veneers on both faces of shutters. 35mm thick including anodized aluminium butt hinges with necessary screws:

Extra for providing vision panel in all types of flush doors including cost of Superior glass as per detailed drawing & to the satisfaction of the Engineer etc completed as directed.

Single Colour Foam Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory. Accessories: i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 2No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos Shutter Thickness : b) 35mm

Providing and fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia

Providing & fixing Stainless Steel tubular lever D-Type mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete

Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.

Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete 250 x 10 mm

Providing and fixing hydraulic floor spring with pivot of reputed make Everrite, prabhat or equivalent as per the manufacturers as specification having double action spring as approved by the Engineer-in-charge.

Providing and fixing M.S. grills of required pattern by inserting in Brickwork etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain Grill

Providing Pre Cast Cement Concrete Jali 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 6mm nominal size ) reinforced with 1.6mm dia mild steel wire including centering and shuttering, roughening, cleaning, fixing and finishing in cement mortar 1:3. (1 cement: 3 fine sand) .All complete excluding plastering of the jambs, sills & soffits. 50mm thick

Providing & fixing 20 mm caves barge boards 2nd class matti wood

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Openable windows and ventilators using 18 mm series shutters section. c) Figured glass

Steel work welded ( SAIL , TATA , VIZAG & using electrodes of AdOr make only ) in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying one coat of primer of red lead paint before erection & one coat after erection. In Tees, Angles, flats and channels

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20mm x 5mm size with top and bottom rails of T-iron, 40 x 40 x 6 mm with 38 mm dia. Steel pulleys completely bolts locking arrangement, stopper, handles including applying a priming coat of red lead paint.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Providing and laying rustic floor tiles (rectified) 300 x 300mm in light shade of Johnson, Somany, Kajaria or equivalent (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete Light Shade

Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. Wall Ceramic Glazed Tiles : 300 x 600

Providing and and laying vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete 300 x 300 mm Design - Liner

Laterite masonry of dressed stones of size as specified laid dry in pitching riverment etc.

Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete Jet black

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. Jet Black

Providing and fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average ) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm Jet Black

Providing 25mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer.

Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent

Providing water proofing treatment over the new R.C.C. roofs terrace by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 (1 cement: 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.

Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior SMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations.

Providing & fixing in position Galvalume/Zincalume flashings, cappings, ridges, gutters upto 600mm/610mm girth and min 3.00m in length (cold Rolled Steel 550 MPa yeild Stress ASTM A 446 Grade E) with hot-dip metallic coating of aluminium-zinc alloy(AZ 150 galvalume) (150 gms/sqm total of both sides with Al-Zn Composition= 55% & 43.5% resp. & 1.5% Si conforming to ASTM 792/ AS 1397) 0.45 mm base metal thickness and 0.50mm total coated thickness, factory cut at all heights for roof, side & gable cladding complete in all respects with AZ 150 GSM SMP color Coated (20mic exterior coat of Silicon Modified Polyester paint system over 5 mic primer and 5 mic polyester back coat over 5 mic primer) incl. fixing to purlins with no 12x14x55mm mechanically galvanised hex head self drilling screws of the best quality as per AS-3566 class 3-4 approved, which should be compatible to be used with sheets. with integral washers and EPDM seals etc. Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed.

Skylight - Danpalon Or Equivalent Day light Panel System: Supply & fixing of 16mm thick 600 mm width MULTIWAL MULTICELL polycarbonate system consist of: The panels shall be uniform in color with an integral Microcell core. In a cross section, the core shall be constructed of tight cells with 6 walls. Panels will be supplied with Vertical Standing Seam at both sides of the panel Snap-on connector to interlock the panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability & shall be of same color as that of panel for aesthetic appeal. NOTE : Necessary Steel structure to be provided by the Steel fabricator. Skylights framework to be raised by 200 mm from Roof Pan level.

12 mm thick cement plaster 1:4 (1 cement:4 fine sand)

6mm thick cement plaster with 1:3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete..

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Extra for providing and mixing water proofing material proportion recommended by the manufacturers. (a)12mm cement plaster 1: 3 (1 cement : 3 sand)

Providing and filling joints between concrete and masonry wherever specified in cement mortar including raking the joints to form "V" groove, applying neat cement slurry, filling with aggregate of 20 mm or less (Katka) in cement mortar 1:4 (1 cement : 4 fine sand), cleaning and curing etc. to avoid cracks at the joints.

Extra for plastering done on moldings, cornices, or arch it raves including neat finish to line and level in one coat.

Melamine polishing on wood work (one or more coat) Matt

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Providing 10 cm drip course at junction of roofs and wall in cement mortar 1:4 (1 cement : 4 fine sand) with bricks of class designation 40 kg / cm2.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Providing anti-termite treatment to the buildings conforming to I.S.S.6113 part II 1971 (revised) including adopting the precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guaranty for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. The payment will be made on plinth of the building (a) preconstruction.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Carting away unwanted excavated material such as soil, lime, moorum, building rubbish (RCC debris, masonary debris, woodwork, door & windows, tiles etc), laterite stone, ordinary rock etc. from site lead of 5km including all loading & unloading charges ( A ) ( by mechnaical Automative Transport ) Contractor should arrange land for dispose up these material at his own cost Lead upto 5 km. Contractor should quote the rate considering salvage value of mentioned material. All statutory approval will be taken by Contractor Excavated material such as soil, lime, moorum, building rubbish

Constructing soak pit 1.20m x 1.20m x1.20m filled with laterite stone aggregate 125 to 180 mm including S.W. drain pipe 100 mm diameter and 1.2m. long complete as per standard design. :

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggregate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. 1000 lit. capacity

Providing and fixing M.S. flat iron tree guard 60cm dia & 2 m high above ground level, formed of 4 nos. 25 x 6mm and 8 nos. 25 x 3mm vertical M.S. flat iron rings in two halves, bolted together with 8mm dia and 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects.

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. 80 mm thick in all colours except grey (M40 grade)

Precast cement concrete kerb-stones Providing and laying upto floor five level pre-cast cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including hoisting and setting in position in cement mortar 1:3 (1cement : 3 Coarse sand) including smooth finishing the exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc. Kerbs, steps and the like at or near ground level

Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. lead.

Supply,installation,Testing and commissioning of 16 KLD capacity of sewage treatment plant for Kunabi craft village.This rate includes all tools,plants,transporation charges,labour and material.

Fabrication, supply and fixing of retro-reflective signboards as per approved drawing of orange & brown colors using high intensity prismatic grade IV sheeting as per IRC 67-2012 Code with white color bonded on to 2mm Aluminum Composite Panel with necessary PVDF coating over which alphabets and numerals of white color are reverse-cut made using Electro Cut-able Film with computerized cutting plotter.(Lettering size,No.of Lines and spacing will be decided by the Architect.) The board shall be provided with frame made out of 304 grade Stainless Steel tubular frame of 304 grade of 30x30x3mm with central support for information and location sign boards and welding and with appropriate welding and rounding the corners with grinder etc. complete. It shall be mounted on vertical posts (two Nos.for locattion and information) made out 75x75x6 mm stainless steel angle section fixed on 4mr Height Post as per approved drawing and including necessary excavation for M 25 foundations concreting/levelling, etc. necessary for fixing of the board and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work.

Providing and fixing R.C.C. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreate granitic or basaltic stone aggregate 12.5 mm nominal size) benches including finishing and plastering the exposed surface with cement mortar 1: 3 (1 cement : 3 fine sand) thickness not exceeding 6mm on exposed surface to give smooth and even surface except on the seat & the back of the bench which shall be of marble mosaic chips finished, rubbed and polished to granolithic finish top layer 6mm thick with white black coloured marble chips of sizes from smallest to 4mm nominal size laid in cement marble powder mix 3: 1 (3 white cement : 1marble powder) by weight in proportion of 4 cement marble powder mix : 7 marble chips by volume with under layer 12mm thick cement plaster 1: 3 (1 cement: 3 coarse sand) incl. finishing the rear and bottom sides with waterproofing cement pant of approved brand and required shade (3 or more coats) to give an even shade complete

1) Grassing with “doob” grass including watering and maintenance of the lawn for 30 days or more till the grass forms of thick lawn free from weeds and fit for moving, including supplying good earth if needed. (Cost of “doob” grass not included )

FRP Dustbin d) Rabbit Type

Supplying of centrifugal pump of following capacity at the site of work including loading unloading excluding taxes, freight, loading & etc. complete. Three Phase Monoblock Pump Sets of SYNC speed as 3000 RPM of 1.02HP

Supplying and filling in Reacherg Pit trenches including watering ramming consolidating, dressing, complete River pebbles.

Supplying and filling in Reacherg Pit trenches including watering ramming consolidating, dressing, complete Laterite aggreate (40mm & below).

Supplying and filling in Reacherg Pit trenches including watering ramming consolidating, dressing, complete Sand (river/manufactured).

Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required. W.C. pan with white plastic seat and lid.

Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required. Orissa pattern W.C. pan

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cister and fittings, cutting and making good the walls and floors where required. Range of two urinal basin with 10 litres pvc. Automatic flushing

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps.

PProviding and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,

Providing and fixing NICKEL chrome plated copper alloy Fancy sink mixer with U shape swinging casted spout Jaquar make or equivalent. Confirming to IS 8931;1993

Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws : Plastic container

Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R. Pipes including lubricating etc. complete, without door : 110mm

Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R. Pipes including lubricating etc. complete, without door : 75mm

Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socketed : 110mm dia

Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socketed : 75mm dia

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 110mm

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 75mm

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : 110mm

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : 75 mm

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 110mm

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 75mm

Providing and fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 110mm

Providing and fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 75mm

Providing and fixing R.P.V.C. vent cowl: 110 mm dia

Providing and fixing R.P.V.C. vent cowl: 75 mm dia

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).

Extra for depth for manholes : a) size 90 x 80 cm

Providing and fixing standard sand cast iron intercepting tap inside interception chamber (to be paid separately) including jointing with stiff mixture of cement mortar 1:1 (1 cement 1 fine sand) as directed by engineer-in-charge For 150mm dia

Providing and fixing square mouth S.W. Gully trap grade “A” complete with C.I. Grating brick masonry chamber and water tight C.I. Cover with frame of 300 x 300 mm size (Inside the weight of the cover to be not less than 4.53 kg.) And frame to be not less than 2.72 kg as per standard design:. b) 150 x 100 mm size P or S type

Providing at store or site work RCC pipes NP2 class of reputed make of socket and spigot ends with rubber roll on joints conforming to IS : 458-2003 revised as per Amendment No. 11 with rubber ring, including freight, carting, loading, unloading, stacking etc. complete. I)NP2 Class 150 mm Dia Pipe

Providing at store or site work RCC pipes NP2 class of reputed make of socket and spigot ends with rubber roll on joints conforming to IS : 458-2003 revised as per Amendment No. 11 with rubber ring, including freight, carting, loading, unloading, stacking etc. complete. I)NP2 Class 250 mm Dia pipe

Conveying carefully from stcak at site,250m from both sides rollong and lowering into trenches ,laying and jointing true to line and level ,RCC spun pressure and non pressure pipes of various classes ,specials including collar and perfcet linking of joint with jack to correct postion including cost of jointing materail in cement mortar 1:2 ,necessary hydraulic testing ,curing of cement mortar etc. 150 mm Dia Pipe

Conveying carefully from stcak at site,250m from both sides rollong and lowering into trenches ,laying and jointing true to line and level ,RCC spun pressure and non pressure pipes of various classes ,specials including collar and perfcet linking of joint with jack to correct postion including cost of jointing materail in cement mortar 1:2 ,necessary hydraulic testing ,curing of cement mortar etc. 250 mm Dia pipe

Supplying at store or site of work Rigid Pvc pipe ( slef fit) pipes for public water supply including railway freight,carting and unloading ,stacking ,transit insurance etc complete.confirming to IS 4985;2000 and bearing ISI Mark ,Class 10 kg/cm2 with excise duty Outer dia in mm 160mm

Supplying at store or site of work Rigid Pvc pipe ( slef fit) pipes for public water supply including railway freight,carting and unloading ,stacking ,transit insurance etc complete.confirming to IS 4985;2000 and bearing ISI Mark ,Class 10 kg/cm2 with excise duty Outer dia in mm 200mm

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per directions of the Engineer in charge.(External work (heavy duty SDR 11 pipe) 15 mm nominal outer dia pipes

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per directions of the Engineer in charge.(External work (heavy duty SDR 11 pipe) 25 mm nominal outer dia pipes.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : 15mm nominal bore

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : 25 mm nominal bore

Providing and fixing non-return valve of approved quality : 25 mm nominal bore

Making the chases upto 7.5 x 7.5 cm in walls including making good after housing G.I.Pipes etc

Electrical Works

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. Group C -- with Cat A Modular Accessories

Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. ( For light points to be used in non residential buildings) Cat A

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required. Cat A

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required Cat A

Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required.

Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required Cat A

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent surface/ recessed PVC conduit of appropriate size as required. 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire (20mm Conduit)

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent surface/ recessed PVC conduit of appropriate size as required. 2 x 4 sq.mm + 1 x 4 sq.mm earth wire (20mm Conduit)

Supply and erecting of 18 inch (450 mm sweep) exhaust fan with double ball bearings, 1400 rpm, heavy duty, complete with all accessories. CAT A

Supply, Erection, Testing & Commissioning of LED down light (recessed/ surface) of Round/ square shape integrated with 8 to 10 W LED WW luminaire.with required Driver of hawels, K-Lite, cropton, bajaj, wipro or equivalet approved by Engineer - in - Charge complete as required.

Supply, Erection, Testing & Commissioning of LED bulb including holder and other accesories to be monutented on wall with 8 to 10 W LED WW luminaire.with required Driver of hawels, K-Lite, cropton, bajaj, wipro or equivalet approved by Engineer - in - Charge complete as required.

Supply, Erection, Testing & Commissioning of LED Tube Light including accesories required to be monutented on wall or ceiling with 20 W LED WW luminaire.with required Driver of hawels, K-Lite, cropton, bajaj, wipro or equivalet approved by Engineer - in - Charge complete as required.

Supply, installation , testing and comissioining of updown lights of decorative fixture of 15 watts including the light fixture - Make: Hawels, schreder, crompton or similar as directed by Engineer incharge complete as required.

Supply, installation , testing and comissioining of Decorative Hanging light fixture of 10 watts including the LED lamp - La Lumière Make - Cat Ref No. - LA39334 or similar as directed by Engineer incharge complete as required.

Supply, installation , testing and comissioining of Decorative Hanging light fixture of 10 watts including the LED lamp - La Lumière Make - Cat Ref No.LA48734 or similar as directed by Engineer incharge complete as required.

Supply, installation , testing and comissioining of Decorative duel focus light fixture of 10 watts including the LED lamp - La Lumière Make - Cat Ref No. 532244 or similar as directed by Engineer incharge complete as required.

Supply installation testing and comissioining of wall mounted split AC of 1.5 TR, 3 star, having inverter based compressor technology with power rating of 3 star, including required copper and drain pipping, communication cable, refrigerant gas, outdoor unit with stand, stabilizer and required accesories of make Daikin, Blue star or equivalent subjected to approval from engineer incharge

Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (a) Cat A

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (h) 16 way double door Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A

Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (b) 40 A, Cat A

Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required) (a) 6 way with 100A MCCB as Incomer, double door, Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (d) TP, Cat A

Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with modular TV socket including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A

Supplying and drawing of Co-axial TV cable of required grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (b) RG - 6

Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required Cat 6

Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. Cat a

Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector (modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. --- CAT A

Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (a) 2 pair

Supply and Installation of 3 meter height pole made of hot dipped galvanised (60 micron minimum) for effective corrosion resistance, mild steel material, Primered and PU painted factory Finished. The column must have a hinged flush door at the bottom with proper strengthening to the cutout of the door opening. A junction/ looping box with 32 Amps heavy duty connector shall be built in to the pole and with provision of SP MCB, provided with a base plate and one set (4 Nos.) of SS J-bolts, and suitable for mounting of IP65 LED luminaire 40-45 Watts with die cast aluminium housing of IK 08.of Neri, Crompton, Bajaj Make or equivalent make subjected to approval of sample by engineer in charge Exclusive of MCB and 3c 2.5 sq mm wire from MCB to Fitting

Supply ,Installation Testing , Commissioning 40-50 W light fixture of IP65, 4730 System Lumens, 4000k LED including constant current driver with short circuit and overvltage protection and surge protection upto 4KV, of Neri or Bajaj or crompton or phhylips Make or equivalent make subjected to approval of sample by engineer in charge and with other required accesories. Exclusive of MCB and 3c 2.5 sq mm wire from MCB to Fitting

Supply, installation , testing and comissioining of spike uplighter LED light of 9 watts including the suitable driver and other acceories - La Lumière - Make: Hawels, schreder, crompton or similar as directed by Engineer incharge complete as required.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil

Centering and shuttering including strutting, propping etc. and removal of formwork for : Foundations, footings, bases for columns and mass concrete.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : All works upto plinth level

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Street Light Service Pillar made out of CRCA sheet with PU painted complete with TPN incoming and outgoing MCCBs, TP Contactors, Electonic/Digital / mechanical Timer, connectors etc. complete (Street light Pillar)

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 35 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (2) 3 1/2 x 35 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (4) 4 x 10 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 x 1.5/2.5 Sq. mm.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (b) In rocky strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (b) In rocky strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required

Supplying of HDPE pipes at store or site of work including loading unloading, stacking , transit insurance etc complete bearing ISI mark & conforming to IS: 4984-1995 & made frm PE 100 resin outer dia in mm 75

Conveying carefully from stack at site, 250 m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for PVC / HDPE complete in all respect as per the direction of the engineer incharge 75 mm OD

Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 80mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested.The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode (a) 3 metres length electrode

Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

M/s Madhukar V Khandeparkar

M/s. R. Z. Malpani

BAGKIYA CONSTRUCTIONS PVT LTD