Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAdmitted-Finance | ₹8.2 L | L1 | Admitted-Finance |
| 2 | L2₹9.9 L+₹1.7 L (21.1%)Admitted-Finance | ₹9.9 L+₹1.7 L (21.1%) | L2 | Admitted-Finance |
| 3 | L3₹10.0 L+₹1.8 L (21.5%)Admitted-Finance | ₹10.0 L+₹1.8 L (21.5%) | L3 | Admitted-Finance |
| 4 | L4₹10.1 L+₹1.9 L (23.1%)Admitted-Finance | ₹10.1 L+₹1.9 L (23.1%) | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | DINESH KUMAR SINGH TOMAR L4 | M/s K.K.Sutrakar L2 | R M ENTERPRISES L3 | RAMBIR SINGH L1 |
|---|---|---|---|---|---|---|---|
| 1.00Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | |||||||
| 1.01 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 210 | One Kilogram | 140 ₹29,400 | 130 ₹27,300 | 160 ₹33,600 | 129 ₹27,090 Lowest |
| 2.00Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. | |||||||
| 2.01 | 160 mm | 20 | One Each | 300 ₹6,000 | 110 ₹2,200 Lowest | 200 ₹4,000 | 160 ₹3,200 |
| 3.00Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. | |||||||
| 3.01 | 2mm thick flat. | 60 | One Square Metre | 600 ₹36,000 Lowest | 850 ₹51,000 | 900 ₹54,000 | 650 ₹39,000 |
| 4.00Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. | |||||||
| 4.01 | 160 mm diameter | 20 | One Metre | 900 ₹18,000 | 780 ₹15,600 | 600 ₹12,000 Lowest | 809 ₹16,180 |
| 5.00Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. | |||||||
| 5.01 | Coupler 160 mm | 6 | Each | 340 ₹2,040 | 200 ₹1,200 | 10 ₹60 Lowest | 300 ₹1,800 |
Tender Value
₹11.2 L
EMD Value
₹22,500
Closing Date
23 Jul 2026, 6:00 pmClosed
Nodal Officer (Tender)
O/o Sr. Chief Engineer(Civil) BSNL MP Civil Zone Block-C, BDA Flats, First Floor, Vidya Nagar,Behind Petrol Pump Hoshangabad Road , Bhopal (M.P.)- 462026
Repair to terrace by providing and laying APP Sheet repair to wall chajjas and ducts at TE Bldg Shivpuri
2026_BSNL_284166_1
NIT NO. 18/EE(C) /BSNL-BPL/2026-27
Open Tender
Civil Works
Item Rate
90 days
Shivpuri
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
AO Cash BSNL Gwalior
₹22,500
21 Aug 2026
15 Jul 2026
25 Jul 2026
15 Jul 2026
23 Jul 2026
15 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | |||||
| 1.01 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 210 | One Kilogram | - | - |
| 2Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. | |||||
| 2.01 | 160 mm | 20 | One Each | - | - |
| 3Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. | |||||
| 3.01 | 2mm thick flat. | 60 | One Square Metre | - | - |
| 4Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. | |||||
| 4.01 | 160 mm diameter | 20 | One Metre | - | - |
| 5Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. | |||||
| 5.01 | Coupler 160 mm | 6 | Each | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.55 MB
BOQ_331604.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .