Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.5 LAccepted-Finance 0 GHULAM MOHAMMAD AND CO 0 GURUDAWARA II RAWALPORA SRINAGAR JAMMU AND KASHMIR RAWALPORA SRINAGAR JAMMU KASHMIR 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001 | L1 | Accepted-Finance Lowest and Reasonable | |
| 2 | L2₹25.7 L+₹17,402.50 (0.68%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹25.9 L+₹39,190 (1.54%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹27.8 L+₹2.2 L (8.76%)Rejected-Finance 01 KHUMRIYAL KUPWARA KHUMRIYAL KUPWARA KUPWARA JAMMU KASHMIR 193223 | KUPWARA | JAMMU AND KASHMIR | 193223 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹30.2 L+₹4.7 L (18.3%)Rejected-Finance 01 DUDWAN KUPWARA DUDWAN KUPWARA JAMMU KASHMIR 193222 UDYAM JK 12 0031214 | KUPWARA | JAMMU AND KASHMIR | 193222 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
22 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF SRINAGAR
GE AF SRINAGAR AF STN SRINAGAR 190007
WELCOME MAINTENANCE AND OTHER MISC WK IN SMQ AREA UNDER GE (AF) SRINAGAR
2023_MES_598139_2
GE(AF)SGR- 28 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE AF SRINAGAR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE AF Srinagar
₹80,000
Yes
2 Sept 2023
8 Aug 2023
23 Aug 2023
8 Aug 2023
22 Aug 2023
15 Aug 2023
Amount
M&L for prepartion of old decorated plastered or unplastered surfaces of wall including filling of holes, cracks and undulating surface with cement wall care putty making surface even and smooth and applying one coat of distemper oil emulsion paint (OBD), complete all as specified and directed by Engineer-in-Charge
M&L for complete removal of existing treatment of walls and applying two coats of distemper oil emulsion (OBD) over one coat primer, complete all as specified and directed by Engineer-in-Charge
M&L for preparation of old ceiling surface and applying one coats of distemper oil emulsion (OBD)including prepartion of old plastered surface of wall, complete all as specified and directed by Engineer-in-Charge
M&L for preparation of old decorated or unplastered surfaces of ceiling including cornices, pilasters and applying one coat of white washing, complete all as specified and directed by Engineer-in-Charge
M&L for preparation of old decorated or unplastered surfaces of walls including cornices, pilasters and applying one coat of white wash, complete all as specified and directed by Engineer-in-Charge
M&L for preparation of old decorated or unplastered surfaces of walls including cornices, pilasters and applying two coat of white wash, complete all as specified and directed by Engineer-in-Charge
M&L for preparation of old painted steel and iron surfaces and applying one coat of synthetic enamel paint, of any description over 10cm width or girth, complete all as specified and directed by Engineer-in-Charge
M&L for preparation of old painted wood and wood based surfaces and applying one coat of synthetic enamel paint, of any description over 10cm width or girth, complete all as specified and directed by Engineer-in-Charge
Attending complaints related to plumbing/water supply and obtaining completion from user including minor repair such as replacement of washers, tightening of taps, tightening of check nuts/unions/sockets/PVC connection etc and making water supply functional in case of blockage, refixing of GI pipe joints, application of white cement where required, complete all as specified and directed by Engineer in Charge.
S&F in repair PVC low level flusing cistern kit, complete all as specified and directed by Engineer in Charge.
S&F in repair, ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 15mm bore (Minimum weight 142 gms) complete all as specified and directed by Engineer in Charge.
S&F in repair , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 20mm bore (Minimum weight 210 gms) complete all as specified and directed by Engineer in Charge.
S&F in repair , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 25mm bore (Minimum weight 455 gms) complete all as specified and directed by Engineer in Charge.
S&F in repair , bib tap standard of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90gms) complete all as specified and directed by Engineer in Charge.
S&F in repair , stop/angle valve of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90gms) complete all as specified and directed by Engineer in Charge.
S&F in repair ,CP waste coupling(half or full threaded) for discharge pipe of 32mm bore (Minimum weight 45gms) complete all as specified and directed by Engineer in Charge.
S&F in repair PVC waste pipe for 32mm bore pipe complete all as specified and directed by Engineer in Charge.
S&F in repair , PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer in Charge.
S&F in repair , PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer in Charge.
S&F in repair , CP grating doom 100 mm dia complete all as specified and directed by Engineer in Charge.
S&F in repair , CP grating doom 125 mm dia with waste hole, complete all as specified and directed by Engineer in Charge.
S&F in repair , 80 mm dia CP shower rose for 15 mm bore pipe Complete all as specified and directed by Engineer-in-Charge.
S&F in repair , CP Health faucet fixed with spring action and lever along with Flexible shower hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.
S&F in repair , CP Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed , Complete all as specified and directed by Engineer-in-Charge.
S&F in repair , toilet paper holder cast copper alloy chromium plated fixed to walls with chromium plated brass screws, complete all as specified and as direted by the Engr-in-Charge
S&F in repair , CP Tubular towel rail, 20mm dia, 60cm long between flanges including brackets complete all as specified and directed by Engineer in Charge.
S&F in repair Stainless steel soap dish fixed to wall with plug and screw, complete all as specified and directed by Engineer-in-charge
S&F in repair, PVC seat cover for EWC colour white incl hinges, complete all as specified and as direted by the Engr-in-Charge.
S&F in repair , PVC lids for water storage tank of any cap complete all as specified and directed by Engineer in Charge.
S&F in repair , brass spindle for Taps, stop cocks, pillar taps, CP mixer etc, complete all as specified and as direted by the Engr-in-Charge
S&F in repair , CP cast copper alloy bib taps screwed down high pressure for 15mm bore pipe, ISI marked complete all as specified and directed by Engineer in Charge.
S&F in repair , CP pillar taps cast copper alloy quarter turn, fancy type CP screwed down high pressure for 15mm bore complete all as specified and directed by Engineer in Charge.
S&F in repair , Stop valve/angle valve Fancy type CP cast copper alloy screwed down high pressure with capstain head for pipe of bore 15mm complete all as specified and directed by Engineer in Charge.
S&F in repair , hot and cold water mixer for Sink/WHB/Bathroom chromium plated quarter turn screwed down for pipe of bore 15mm, including necessary fittings, complete all as specified and directed by Engineer in Charge.
S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed by Engineer-in-charge
S&F in repair vitreous china wash basin white flat back, size 550x400 mm, with & including 32mm dia PVC waste pipe and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc complete all as specified and directed.
S&F in repair, Vitreous china squating pan, orissa pattern size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, in repair, Complete all as specified and directed by Engineer-in-Charge.
S&F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe , pvc cover sheet in same colour etc complete all as specified and directed.
Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc, complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc, complete all as specified and as directed by Engineer-in-Charge.
M&L for 15mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and as directed by Engineer-in-Charge.
M&L for 20 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and as directed by Engineer-in-Charge.
Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings, complete all as specified and as directed by Engineer-in-Charge.
Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings, complete all as specified and as directed by Engineer-in-Charge.
S&F in repair, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 ltr capacity hoisted and fixed in position all as specified in SSR Part I., including taking down of exiting tank, complete all as specified and directed by Engineer in Charge.
S&F in repair, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltr capacity hoisted and fixed in position all as specified in SSR Part I, including taking down of exiting tank, complete all as specified and directed by Engineer in Charge.
S&F in repair, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000ltr capacity hoisted and fixed in position all as specified in SSR Part I, including taking down of exiting tank, complete all as specified and directed by Engineer in Charge.
M & L for Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity upto 500 ltrs and endorsed the word "CLEANED ON" and "DATE" (in DD-MM-YY form) with stencil of letter size 10cm and refixing the float valve and plugging wash pipe complete all as specified and directed by Engineer-in-Charge.
M & L for Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity exc 1000 ltrs and upto & including 2000 ltrs and endorsed the word "CLEANED ON" and "DATE" (in DD-MM-YY form) with stencil of letter size 10cm and refixing the float valve and plugging wash pipe complete all as specified and directed by Engineer-in-Charge.
Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, complete all as specified and directed by Engineer in Charge.
S&F in repair , looking mirror of size 600x450mm with PVC moulding complete all as specified and directed by Engineer in Charge.
S&F in repair , Hydraulic door closer designation No 2 universal type weight between 36 to 60 kgs of aluminium body complete all as specified and as directed by the Engineer-in-Charge
S&F in repair , 300mm mild steel helical door spring rat tail type including collar plate and welding if required or otherwise fixed with screw on wooden frames complete all as specified and directed by Engineer in Charge
S&F in repair , Aluminium, anodised, barrel tower bolts of extruded section 150mm size, Complete all as specified and directed by Engineer-in-Charge.
S&F in repair , Aluminium, anodised, barrel tower bolts of extruded section 100mm size, Complete all as specified and directed by Engineer-in-Charge.
S&F in repair , Aluminium handles, cast type, anodised 150mm size
S&F in repair , Aluminium handles, cast type, anodised 100mm size
S&F in repair , Hasp and staple 100mm size, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, Complete all as specified and directed by Engineer-in-Charge.
S&F in repair , Floor door stopper of aluminium alloy body and tongue with rubber cover ends, Complete all as specified and directed by Engineer-in-Charge.
S&F in repair, 100 mm long medium weight, cold rolled mild steel Butt hinges.
S&F in repair , 75 mm long medium weight, cold rolled mild steel Butt hinges.
S&F in repair , Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts.
S&F in repair , stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 in steel/ wooden shutter of door & windows complete all as specified and directed by Engineer in Charge.
S&F in repair , 0.56mm thick aluminium sheet fixed over doors etc in repairs, complete all as specified and as direted by the Engr-in-Charge.
S&F in repair , sheet glass ordinary quality 3mm thick and glazing with oil putty/wooden beading in squares not exceeding 0.50 Sqm including hacking out, complete all as specified and directed by Engineer in Charge.
S&F in repair , figured glass, pinheaded type ordinary quality 3mm thick and glazing with oil putty/wooden beading in squares not exceeding 0.50 Sqm including hacking out, complete all as specified and directed by Engineer in Charge.
S&F in repair , 5 mm thick tinted/pin headed figured glass fixed with rubber gasket and aluminium snap beading including hacking out, complete all as specified and directed by Engineer in Charge.
S&F in repair , designer particle boards or tiles 12mm thick for insulation and acoustic purposes, 60cm x 60cm in size, including painting of matching colour of existing surface Complete all as specified and directed by Engineer-in-Charge.
S&F in repair , 18/19mm thick Particle board interior grade, prelaminated one side with decorative choice lamination and other side lamination, fixed with nails or screws, complete all as specified and directed by Engineer-in-Charge.
Extra over rates of block board for external teak wood lipping, 6mm thick fixed with nails, complete all as specified and directed by Engineer-in-Charge.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30mm, complete all as specified and directed by Engineer-in-Charge.
S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed by Engineer-in-Charge.
S&F 100 mm long hasp and staple, safety type, brass aluminium anodized with mild steel hinge pin including bolt to hinge plote and fixed with screw, complete all as specified and directed by Engineer-in-Charge.
S&F in repair , 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and as direted by the Engr-in-Charge.
S&F in repair , 6 mm thick Plywood, grade BWR, type BB, fixed with nails or screws to timber frame work, complete all as specified and as direted by the Engr-in-Charge.
S & F for Wooden planks of second class hard wood, 20mm thick, planed one side and edges tongued and grooved or rebated fixed, in repairs to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, complete all as specified and directed by Engineer-in-Charge.
S&F in repair 25mm dia powder coated MS drapery rod wooden finish including fancy type matching colour brackets & endcaps for both ends complete all as approved by Engr-in-charge.
S&F in repair 20 mm dia Stainless steel drapery rod standard quality as approved by Engr-in-charge complete all as specified and directed.
S & Fin repair, PVC Acrylic seat 3mm thick of required size and shape & colour in Vertical or horizontal position fixed with screws, pvc/wooden beading, nails, in repairs, complete all as specified and directed by engineer in charge.
Taking down aluminium door/window shutter of any size n exc 2.5 Sqm each & refixing in the same position / opening after easing and adjusting, tightening of joints or changes of hinges, screws, cleats, beadings, rubber gasket etc, as per site requirement to make functional the shutter, complete all as directed by Engineer in Charge.
Taking down Shutters and refixing in same opening after easing and adjusting of any description n.exc 1 sq. m each including resecuring/changing of builders hardware complete all as specified and directed.
Taking down and refixing of shutters in same opening after easing and adjusting of any description exc 1 sq. m and n exc 2 sq. m each including resecuring/changing of builders hardware complete all as specified and directed.
S&F in repair, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,in repairs, complete all as specified and directed by Engineer in Charge.
S&F in repair, Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs washers and waster including beeding in cement mortar on to dwarf wall or influding fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160mm, in repair, Complete all as specified and directed by Engineer-in-Charge.
S&F in repair, for Kitchen plate rack made of stainless steel 1 mm wall thickness with plugs washers as overall size of 75cm x 75 cm including fixing to wall and all assessaries in repair, Complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each, complete all as specified and directed by Engineer-in-Charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed by Engineer-in-Charge.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-Charge.
Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc including necessary welding complete all as specified and directed by Engineer in Charge.
M & L for repair of leakage/seepage from the WC of the upper Qtr, Seal all joints of u/g pipes, resecuring cistern and connected fittings, sewage down pipe, making good the floor/walls matching with existing floor/walls complete all as specified and directed by the Engineer-in-charge.
M & L for repair of leakage/seepage from the Nahani trap/floor trap of kitchen/bathroom/washbasin of the upper Qtr, in any position at any height, complete including change of floor trap, pipes embeded in floor,Seal all joints of u/g pipes, making good the floor/walls matching with existing floor/walls Complete all as specified and directed by Engineer-in-Charge.
Dismantling MS works of any description complete all as specified and directed by Engineer-in-Charge.
M & L for mild steel Framed work such as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed by Engineer-in-Charge.
Dismantling of Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings etc, complete all as specified and as directed by Engineer-in-Charge.
S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed by Engr-in-Charge.
S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating, complete all as specified and directed by Engr-in-Charge.
M&L for Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint over one coat red oxide primer in camouflage pattern complete all as specified and directed by Engineer-in-Charge
M & L for preparation of newly steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
M & L for preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
Dismantling wall and ceiling boards, fibre pulp insulation etc or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed by Engr-in-Charge.
S&F GI frame work 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 centre to centre including Providing and fixing Gypsum Board 12mm thick (water proof) in ceiling fixed with screw or as per manufacturers instructions and jointing and
finishing to a flush finish of tapered and square edges othe board any other joints with recommended jointing compound over jointing tapes, finishing with one coat of primer and two coats of oil emulsion distemper, complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth using integral water proofing compound upto triple storey height, complete all as specified and as directed by Engineer-in-Charge. (WPC shall be measured and paid seperately)
Supply only Liquid water proofing compound.
M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement upto triple storey height, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint upto triple storey height, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed by Engineer-in-Charge.
Demolition of stone or tiling work incl. cement mortar bedding (but not backing), complete all as specified.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular)area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed by Engineer-in-Charge.
All as per item No 111 above here-in-before but in Skirting including 10 mm thick backing coat cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.
M&L for Glazed ceramic tile 450 x 300 x 06-7mm thick (coloured)on vertical surfaces such as wall, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and as directed by Engineer-in-Charge.
M& L for Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed by Engineer-in-Charge.
All as per item No 114 above here-in-before but in Skirting including 10 mm thick backing coat cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.
M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding of edges complete all as specified.
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.
NOTE : The contractor shall deploy one SUPERVISOR alongwith necessary transport to collect all the complaints from MES complaint cell on daily basis (from 0900 Hrs to 1700 Hrs) in all working days and to supervise his workers/ tradesman (plumber/carpenter/masson/blacksmith) in totality. He will maintain the record of all complaints received on daily basis and summarise the stores consumed and complaints attended and give the completion to the concerned JEs. The unit rate quoted by the contractor shall deemed to include for the above provision and nothing extra shall be paid on this account. T&P for attending the jobs will be provided by the contractor.
M/S FAROOQ AND SONS
M/S LUCKY BUILDERS
M/S MIR AND CO
M/S WANI AND SONS
M/S B S CONSTRUCTIONS
M/S Abdul Ahad Rather
SB ENTERPRISES
M/S TARIQ AHMAD SHEIKH
M/S M.R. Construction
M/S GHULAM HASSAN AND SONS
M/S Thakur & Sons
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .