Providing Sluice/ Air Valve on 150/200mm Conveying Main leading to Paliem in Mandrem Constituency

Earthwork in excavation by mechanical means (hydraulic excavator)/ manual means in foundation pipeline trenches, drains not exceeding 1.5 m in width 10sq.m on plan including dressing of sides ramming of bottoms for all lift including getting out the excavated soil & disposal of surplus soil for all lead and in all types of soft stratas comprising any of the materials such as soil, silt, sand, clay, gravel, moorum of all varieties shingles, pebbles all types of conglomerates, laterite rocks, ordinary rocks, soft rock disintergrated rocks, fissured, shuttered/decomposed rock, weathered rocks and all such other materials as described under appendix A to these specification either in full or in parts as the case may be adopting any method / methods as may be convenient or permitted inclusive of chiseling, wedging etc, blasting prohibited and in all conditions such as dry , moist , foul, saturated submerged etc including providing barricading, danger lighting guarding and as per the direction of the Engineer-in-charge etc.

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS: 14846 - 2000 having body, door, dome, gland in graded cast iron to IS:210 Gr. FG 200Min., four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2, inside screw of non-rising stainless steel AISI410, spindle, Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box. and back seat bush) TYPE P.N. 1.0 (Class A); Nominal Diameter in mm; 150

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS: 14846 - 2000 having body, door, dome, gland in graded cast iron to IS:210 Gr. FG 200Min., four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2, inside screw of non-rising stainless steel AISI410, spindle, Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box. and back seat bush) TYPE P.N. 1.0 (Class A); Nominal Diameter in mm; 150

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Double orifice type air valveas per fig DS1 withinbuilt isolating valve smallwith SS spindle and CI protective cap confirming to IS1 4845/2000 (with latest amendments).Low pressure large orifice chamber with vulcanite coated timber ball resting on moulded rubber seating and chamber having CI cowl protection.High pressure chamber shall have rubber coated timber ball as float having Float guides; and LTB or SS orifice nipple The body seat ring shall be of LTB as per IS 318 LTB2 or of SS. All nuts /bolts shall be of carbon steel of SS. The flange shall be drilled and faced ,as per IS1538(part 4 &6) suitable to working pressure of 10 kg /cm2 TYPE P.N. 1.0 (Class B); Dia in mm; 80

Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I; Nominal diameter in mm.; 150

Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I; Nominal diameter in mm.; 200

Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminous paint complete.; All Socket Tee; Nominal Diameter in mm; 200x80

Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminous paint complete.; All Socket Tee; Nominal Diameter in mm; 150x80

Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.; Mechanical Compression Collar Coupling; Nominal Dia in mm; 200

Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.; Mechanical Compression Collar Coupling; Nominal Dia in mm; 150