Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹24.7 L+₹5.2 L (27.0%)Rejected-Finance | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | L3₹28.8 L+₹9.4 L (48.3%)Rejected-Finance D 65 423 C 1 RANA NAGAR COLONY GATE NO 4 LAHARTARA VARANASI UP PIN 221106 | VARANASI | VARANASI | UTTAR PRADESH | 221106 | L3 | Rejected-Finance Other than lowest quoted tenderer |
Tender Value
₹36 L
EMD Value
₹72,000
Closing Date
23 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Prayagraj
HQ CWE New Cantt Prayagraj
PERIODICAL SERVICES TO OTM/MD ACCN IN ZONE A AND ZONE B AREA UNDER AGE (I) AYODHYA.
2023_MES_614335_1
81765/AYD/E8
Open Tender
Civil Works
Item Rate
180 days
Ayodhya
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE (I) Ayodhya
₹72,000
Yes
11 Nov 2023
18 Aug 2023
30 Sept 2023
19 Aug 2023
23 Sept 2023
9 Sept 2023
Amount
M&L for complete removal of existing decorative treatment of any description on walls, roof projectios, facias, cornices etc by scraping with mechanical sander having mechnical vaccum mechanism with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying a layer of wall care putty min 2mm thick complete all as specified and directed by Engineer-in-Charge. Note:- AGE’s approval shall be obtained by the Contractor in token satisfaction before applying decorative finishes.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistanceas per IS-15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon adhesives @ 1.43 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Ltr/10 Sqm, primer and emulsion paint to be applied through airless spray machine (Mechanical means) complete all as specified and directed by Engineer-in-Charge. Note: (i) Preparation of surfaces included in Srl item No. 1.00 above (ii) Tint / Shade shall be decided and approved by AGE
M&L for applying two coats of oil bound distemper on prepared surfaces of walls of any description over 10 cm width or girth, not otherwise described, oil bound distemper to be applied by authorised applicator of the manufacturer through airless spray machine (Mechanical means) complete all as specified and directed by Engineer-in-Charge. Note: (i) Preparation of surfaces included in Srl item No. 1.00 above (ii) Tint / shade shall be decided and approved by AGE
M&L for applying two coats of plastic emulsion paint including primer on prepared surfaces of walls of any description over 10 cm width or girth, not otherwise described, primer and plastic emulsion paint to be applied by authorised applicator of the manufacturer through airless spray machine (Mechanical means) complete all as specified and directed by Engineer-in-Charge. Note: (i) Preparation of surfaces included in Srl item No. 1.00 above (ii) Tint / shade shall be decided and approved by AGE
M&L for preparion of old decorated surfaces of walls, cornices, pillars etc and applying one coat of plastic emulsion paint complete all as specified and directed. Note: Tint / shade shall be decided and approved by AGE.
M&L for preparation of old decorated surfaces of walls including cornices, pillars etc and applying one coat of acrylic exterior grade oil base emulsion paint (anti-fungal) complete all as specified and directed by Engineer-in-Charge. Note: Tint / shade shall be decided and approved by AGE.
M&L for preparion of old decorated surfaces of walls, cornices, pillars etc and applying two coats of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge. Note: Tint / shade shall be decided and approved by AGE.
M&L for preparation of old decorated surfaces of walls including cornices, plaster and other wall features by brooming down with steel wire brushes, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil / greasy spots, removing all loose scale and other foreign matters and applying one coat of oil bound distemper complete all as specified and directed. Note: Tint / shade shall be decided and approved by AGE.
M&L for preparation of old decorated surfaces of walls including cornices, plaster and other wall features by brooming down with steel wire brushes, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil / greasy spots, removing all loose scale and other foreign matters and applying one coat of white wash complete all as specified and directed.
All as per item No. 9.00 but applying two coats of white wash on walls.
All as per item No. 9.00 but applying one coat of white wash on ceiling.
M&L for preparation of old decorated surfaces of walls including cornices, plaster and other wall features by brooming down with steel wire brushes, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil greasy spots, removing all loose scale and other foreign matters and applying one coat of cement based paint complete all as specified and directed by Engineer-in-Charge. Note: Tint / shade shall be decided and approved by AGE.
M&L for complete removal of existing decorative treatment of any description on walls, roof projectios, facias, cornices etc by scraping with mechanical sander having mechnical vaccum mechanism with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed by Engineer-in-Charge. Make :- Berger Duro-cem Neo (Water Proof & self curing cement paint or equivalent as approved by Engineer-in-Charge.
Taking down cement or cement lime plaster on brick work or concrete surfaces of any description including raking out joints, hacking for key and scrubbing down with water and M&L for 15mm thick plastering in cement mortar (1:6), finished even and fair complete all as specified and directed by Engineer-in-Charge.
Taking down cement or cement lime plaster on brick work or concrete surfaces of any description including raking out joints, hacking for key and scrubbing down with water and M&L for 15mm thick plastering in cement mortar (1:4), finished even and fair complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement base primer complete all as specified and directed by Engineer-in-Charge. Note: Tint / shade shall be decided and approved by AGE
M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion with one coat of wall care putty complete all as specified directed by Engineer-in-Charge.
M& for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted iron or steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old plastered / concrete / Brick / stone / asbestos cement surfaces of walls of any description and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old plastered / un-plastered surfaces / previously treated surfaces of chajjas edges / facia / borders / parapets and the like by removing all dust dirt and loose scales of existing finish and other foreign matter, removing oil and grease marks including growth of moulds, moss complete including making good the damaged edges, corners, facias etc in cement mortar (1:3), finishing the surfaces even & smooth using putty and applying two coats of cement base paint over a coat of cement base primer to entire satisfaction of GE, complete all as directed.
M&L for preparing old wooden surfaces of any description width or girth including one coat of wood filler, cleaning and applying one or more coat of french polish to give glossy finish complete all as specified and directed by Engineer-in-Charge.
M&L for writing alphabets & numbers n exc 30 cm high using synthetic enamel paint of any tint complete all as specified and directed. Note : (i) Contractor will procure the approved materials and deposited to MES store and will be issued to contractor by concern JE on requirement basis. (ii) Engr-in-Charge approval in token satisfaction shall be obtained by Contractor before applying fnishing coat. (ii) The work shall be executed in multistoried bldg (i.e upto G+3) by providing all necessary scaffolding and all safety precautions during execution of work and rate for the same deemed to be included in quoted rate.
M/S- YASH BUILDERS
R K BROTHERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .