SPL REPAIR OF BOUNDRY WALL OF BLDG NO RA-16 (PINE ARTY OFFICER MESS HQ 9 ARTY BDE) AND SPL REPAIR TO BLDG NO RHA 23 ( Sport Store and Security stores of 56 Fd Regt ( JITRA ) UNDER AGE B/R-I AND AGE E/M-I OF GE (NORTH) MEERUT CANTT

Amount

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed .

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly for One tube light/Bulb/ street light point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed

All as per serial item No 02 here - in - before but One fan / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed

All as per serial item No 02 here - in - before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed

All as per serial item No 02 here - in - before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed

All as per serial item No 04 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed

S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked complete all as specified and directed

S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed

S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed

S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked complete all as specified and directed.

S & F 2 pin, 6 A, 250 V B22 base bulb holder conforming to IS 371: 1999 and having terminal capacity 3 X 1.5 mm² with IK 04 and IP 20 protection complete all as specified in IS 732: 2019 and directed .

S&F 9 watt LED bulb 2 pin B22 base,100 Lumems per watt, PF≥0.9,180° wide beam angle voltage surge protection 4kV ,6500K cool white,operating voltage 100-240V complete all specified and directed.

S & F 20 W surface / wall mounted, 4 feet LED T-5 batten having PC diffuser, luminous efficacy of ≥100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in extruded aluminium with white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, 50000hr run,including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed .

S&F in repairs 25 Watt pewired pressure die cast housing LED bldg security light luminaire IP 66 ingress protection ,Efficacy 120lm/watt ,built-in surge protection,electronic driver,50000hr run, incl suitable OD GI pipe bracket, two nos mounting clamps with nuts, bolts and washers, electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture complete all as specified and directed by the engineer-in-charge.

S&F Ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed .

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB's complete all as directed.

S & F MCB, SP, AC, 240 volts "B" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed.

S & F Isolator, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps and making connections complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

S & F propeller type AC ventilating fans, 230 volts, 50 Hz, heavy duty, 1350 RPM, 250 mm sweep (Exhaust fan) copper winded motor ,PVC body and blades protected by louvers complete including M & L for providing / cutting the hole of required size in wall & finishing the same to match the adjoining surfaces and connecting with and including PVC insulated, three core, white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No complete all as specified and as directed.

S & F BLDC without remote ceiling fan 1200mm sweep, 220CMM air delivery,with remote including suitable step fan regulator ,BEE 5 star energy rated, minimum service value≥6,copper winded motor ,powder coated aluminium tri blade, dynamically balanced including canopys,down rod size upto 1.2m,shackel assembly,safety pin,nut bolt etc,and connecting with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fan and writing MES No. complete all as specified and directed .

Taking down existing Exhaust fan 250 / 300 mm of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as specified and directed

Taking down existing ceiling fan of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as specified and directed

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc. complete all as specified & directed

M & L for brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed

M&L for old sizebrick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed.

Taking down cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid seperately

M & L for Preparation of old surface after complete removal of existing treatment by mechanical means complete all as specified and directed.

M&L for applying 3mm thick wall care putty making smooth surface complete all as specified and directed.

M&L for one coat of primer complete all as specified and directed.

M&L for two coat of OBD complete all as specified and directed

M&L for two coat of acrylic smooth two or more coat applied @ 1.67 litre/ 10 sqm over and including primer coat of exterior primer applied @ 2.20 kg / 10 Sqm using roller for painting complete all as specified and directed.

M & L for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M&L for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two or more coat applied @ 1.67 litres/ 10 sqm over and including primer coat of exterior primer applied @ 2.20 kg / 10 Sqm using roller for painting complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position (unframed work) complete all as specified and directed.

M & L for Rolled mild steel in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats similar work conforming to Fe 410 -W (Gde E- 250) quality A etc complete all as specified & directed.

M & L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 fixed in repair complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings incl guard bars/hold fast etc ( exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete fe290(Gde E-165) complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each complete all as specified and directed.

Taking down chowkhat or frames of door/ window / ventilator with shutter(Without taking off shutter from the frame) n.exc 1.50 m each complete all as specified and directed.

M & L for Anodised aluminium Powder Coating (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M & L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) sliding window and ventilator shutters, sliding (Two/Three) type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium and Sliding Arrangement Complete fittings as required complete all as specified and directed.

M & L for Anodised aluminium Powder Coated (of Approved colour ,Thickness or powder coating not less than 50 micron) door Shutter , side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium Complete fittings as required complete all as specified and directed.

S&F 4 mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

Hacking out old broken glass any thickness, size, quality or description not exc 0.5 sq.m from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 3 mm thick figured glass, pin head type and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

S&F, in repairs, Double action floor spring, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete all as specified and directed.

S&F in repairs , Mortice lock, brass, four lever, verticle type, size 75 mm complete all as specified and directed.

S&F in repairs plastic seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs PVC cistern valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, complete all as specified and directed.

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F Factory made Double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly → supplied and fitted to chowkats complete all as specified and directed.

M & L for Machine cut Pre Polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed.

M & L for Machine cut Pre Polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over including rubbing and polishing laid over rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

S&F 100 mm butt hinges, meium weight Brass complete all as specified and directed.

S&F Brass barrel tower bolt 200 mm, extruded section complete all as specified and directed.

S& F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S & F 125mm Extruded brass handles,fabricated type polished complete all as specified and directed.

S&F, Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S&F, in repairs, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises complete all as specified and directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick square/ rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in loors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for light shade, vitrified tiles, 7 to 8 mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed.

M&L for vitrified tiles, 7 to 8 mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 350mm x 7mm/600mmx300mmx7 mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L for 18 -20mm thick BLACK/RED(LAKHA) granite factory made bull nosed, polished (table rubbed and polished) as in jambs, wall,window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L for rounding to edges of stone slabs two edge full round, such as in steps,cooking platform and other similar situation complete all as specified and directed.

S & F, in repairs, 18/19mm thick Soild WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancy handle , Magnite lock,including 0.8 mm thick mica complete all as specified and directed.

S&F in repairs , continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.

S&F in repairs White rotational moulded polyethene water storage tank ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I. (Cap 500 ltrs capacity).

S&F in repairs White rotational moulded polyethene water storage tank ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I. (Cap 1000 ltrs capacity).

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) all as specified and directed

S&F in repairs gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed.

Taking up or down steel tubing with all fittings of 20mm bore of pipe complete all as specified and directed.

Supplying and laying 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and wall complete all as specified. complete all as specified and directed.

M & L for cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed.

S&F in repairs angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe complete all as specified and directed.

S&F stop valves chromium plated , 15 dia bore fixed in repairs complete all as specified and directed.

S&F in repairs 15mm brass chromium plated bib cock with wall flange complete all as specified and directed.

S&F in repairs 15mm dia brass chromium plated central hole wash basin mixture fancy type with or without lettered 'Hot' or 'Cold', for mixing hot & cold water with long screwd shanks and fly nut capstan head or unions and screwed to walls complete all as specified and as directed.

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts 450 mm long complete all as specified and directed.

S&F in repairs vitreous china ware EWC combined pattern complete with internal fittings and including connecting to drain pipe complete all as specified and directed

S&F in repairs for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as spcified and directed

S&F in repairs super special colours vitrous china wash hand basin white flat back, size 580x430mm including waster pipe , chromium plated waste coupling 32mm dia , with pedestal / bracket etc complete all as specified and directed

S&F in repairs stainless steel fancy type curtain rod, 20mm dia fixed with braket, incl taking down of old curtain rods complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs, corner glass shelf with bracket complete all as specified and directed. Make- Jaquar (Cat No- 1173 or equivalent make in PS)

S&F in repairs brass chromium plated soap dish complete all as specified and directed.make- Jaquar (Cat No- ACN-1131N) or equivalent make in PS.

Dismantling cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and directed.

S&F in repairs ,110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F in repairs ,75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laying as in floor and complete all as specified and directed.

.Dismantling wall and ceiling boads (fibre, pulp, insulation etc.) or insulation boards/ slab/ blankets, any thickness including aluminium snap grid complete all as specified and directed.

M & L for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws all as specified and directed.

S&F Anodised aluminium snap grid frame workframe work for false ceiling all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

M&L for cement concrete 1:4:8, type D2(40mm graded crushed stone aggregate) as in 75 mm thick sub base complete all as specified and directed

M&L for chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified and directed

S&F powder coated approved colour anodised aluminium partition with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame with one or more rebates including S&F 5.50 mm thick plain/tinted glass complete all as specified and directed.

M & L For TypeB1 1:2:4 (20mm graded graded graded aggregate) Providing precast cement concrete in window or door cills, lintels,bressumers, steps,quoin blocks (for use with ma sonry), string courses, copings.kneelers, apex stones, pier caps,columns, posts,boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling).corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise specically provided complete all as specified and as directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided complete all as specified.

M&L for RCC M-25(20mm graded crushed stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, all as specified and directed.

M&L for TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete all as specified and directed

M&L for TMT bars 6mm to 8mm dia cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete all as specified and directed

M&L for form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter rough finished surface of concrete complete all as specified & all as directed.

M&L for form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape complete all as specified & as directed.

M&L for 18 -20mm thick Black Granite/Red Granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

S & F in repairs for stainless steel 10mm thick of 300mm in height/length of any shape in english eighter in hindi,fixed to floors or in vertical surface as in top of gate or in flag posts, complete all as specified and as directed .

Supply only integral WPC complete all as specified and directed

M & L for Type D2 1:4:8 (40 mm graded aggregat e) Cement concrete in in foundations, filling and mass concrete complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and directed .

M & L for Type C2 1:3:6 (40 mm graded aggregat e) Cement concrete in surface channels and drains complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, such as floor,bed block for post/struts etc complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone agreegate as in bed blocks to fencing post complete all as specified and directed

S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stanadard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil as specified & as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25cm in soft/loose soil complete all as specified and directed

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed

S&F concertina coil as in fencing with punched tape concertina coil upto 450 mm dia, 10 m openable length having 50 Nos rounds per 6 m length, upto 3.0 m height of wall with existing angle iron Y shaped placed 2.4 m to 3.5 m distance, stud tied with OJ staples and OJ clips to retain horizontally including necessary bolts or OJ barbed wire tied to angle iron,350 to 450 mm dia spirally round shape complete all as specified & directed.

VIRAT CONSTRUCTIONS (BID ID -3059438)

A.V. ASSOCIATES (BID ID -3058533)

mohanlal gupta (BID ID -3065842)

Manglam Engineers and Construction Co (BID ID -3058851)

SA construction co. (BID ID -3067321)

vibha associates (BID ID -3067893)

M/S AMAR ELEKTRO CENTRE (BID ID -3059342)

Arun Construction Co. (BID ID -3058735)