Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹21.4 L+₹12,922.69 (0.61%)Rejected-Finance VILL PO PATULI DIST PURBA BARDHAMAN | PURBA BARDHAMAN | WEST BENGAL | 712134 | L2 | Rejected-Finance AS L2 BIDDER | |
| 3 | L3₹21.6 L+₹30,445.72 (1.43%)Rejected-Finance 7G CORNFIELD ROAD KOLKATA 700019 | KOLKATA | KOLKATA | WEST BENGAL | 700019 | L3 | Rejected-Finance AS L3 BIDDER |
Tender Value
Refer Docs
EMD Value
₹45,000
Closing Date
23 Dec 2022, 6:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER,CMD,PHE
EE,CMD,PHED,5TH FLOOR, PURTA BHAVAN
Supply-Installation-of-Submersible-Pumping-Machinery -Voltage-Stabilizer-Chlorination-system-and-internal-House-wiring-for-Tube-well-no-1 -2-at-Amlajora-Water-Supply-Scheme-under-CMD-PHE-Dte-Dist-Purba-Bardhaman
2022_PHED_425989_1
WBPHED/EE/CMD/eNIT_25/2022-23
Open Tender
Electrical Work/ Equipment
Item Rate
30 days
AMLAJORA
Please refer Tender documents.
5 documents required · 5 mandatory
₹45,000
Yes
OFFICE OF EE, CENTRAL MECHANICAL DIVISION, PHED
11 Apr 2023
5 Dec 2022
27 Dec 2022
5 Dec 2022
23 Dec 2022
8 Dec 2022
8 Dec 2022
Amount
Supply & delivery of the following Pumping machinery, Electrical accessories etc. at site. a) Submersible Pumping Machinery, directly coupled with suitable size water proof motor having following specifications. P U M P DISCHARGE ( 23.406 M3/H) H E A D (61 mtr.) S H A F T. Stainless Steel. OUTLET SIZE. 65mm. PUMP EFFICIENCY IN PERCENTAGE: Minimum 65. M O T O R (7.5 H.P.) ( S/D connection) Submersible type, 3ph.50Hz, A.C.- 400Volt +10%, wet type winding, RPM-2900. Pump motor set must be BEE standard energy star rating (3-5) as per IS – 8034:2002 Make-KSB/TEXMO/Approved Make ) N.B.;- (I) H/Q Characteristic Curve of pump set should be submitted before delivery. (II) Test certificate of pump & motor should be submitted during delivery & G.C.
b) 4.0 sq.mm.3core, water proof flat cable, suitable for above pump set. (Make-FINOLEX /GLOSTER /MESCAB /CURRENCY/Crystal /Polycab/ Approved Make)
c) 100A 4 way 415 V wall mounted Busbar Chamber (make (Havels/Standard/Approved Make)
d) 100 A TPN Main Switch with re-wirable fuse link within sheet steel enclosure(make (Havels/Standard/Approved Make)
e) Supply and Delivery of 25 mm², 1.1 KV grade. 3.5 core Al Armoured XLPE conform to IS 1554/7098(part-I) 1998 (Make : Gloster /HAVELLS /MESCAB/ CURRENCY/POLYCAB/ CRYSTAL/ Approved Make)
Supply & delivery of following materials of best quality. a) 80mm. N.B. U.P.V.C. column pipe 7.1mm. thick having 70mm. long 8TPI threaded both side with heavy type socket & O ring biax technology with wiring lock system non corrosive high tensile having I.S.O. 9001 standard. (Make : Ashirbad/Raksha/ Approved Make).
i) 10ft. long (3mtrs)
ii) 5ft. long (1.5mtrs)
iii) 80mm. dia. top & bottom adaptor
iv) 3" x 2" M.S. Reducer
v) 3 " dia. X 5 ft long M.S. (7.1 mm Thick) Column pipe having both side 11 TPI Thread and Socket.
b) Heavy type M.S. Suspension clamp of suitable dia. made of 80mm×10mm M.S. flat with nuts, bolts, washer etc.( suitable for 80mm. dia. column pipe)
c) Split type M.S. fabricated tube well cover for 250mm dia. tube well housing pipe with necessary fitting arrangement along with of column pipe, Air pipe, rope of anti snapping device & cable entry gland etc.
d) 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge. (Make: H. Guru/Febig/ Approved Make).
i) Tube well outside the pump house. (This cost includes 15mm. dia. G.I. pipe Tata medium of appx. 30ft. length & specials)
e) Depth gauge (Make: H. Guru/Febig/ Approved Make) of 102mm. dia. with steel Air pipe of reqd. length (85ft) with all others fittings & accessories for the above work including supplying in one good quality hand pump. i) Tube well outside the pump house.(This cost includes 15mm. dia. G.I pipe of appx. 30ft length & Specials)
f) Anti snapping safety device made of suitable size & heavy type M.S. fabricated busket for resting the above pump set, with eye bolt/H. bolt 25.mm.dia. arrangement (4 ends), clamps for holding pump motor, Nuts & bolts etc. complete as per direction EIC. including 10mm.dia. stranded steel wire rope or 16mm dia. Nylone rope for hanging of anti snapping safety device as per direction of EIC.
g) 80mm.dia. CIDF Non Rising Spindle Sluice Valve (IS: 14846) with PN1.0 Pressure Rating as per I.S. specification & other required materials for the job i.e for completing the construction of delivery and wash out line.(Make:- IVI / UPADHYA / KIRLOSKAR/Durga/ Jupiter/MAGNET/CAIR/McWANE/Sigma Flow/ Approved Make). N.B: I) Test certificates for both valves should be submitted at the time of delivery. II) M. S. Specials should have minimum 7mm.Thickness.
h) Ø80 mm CIDF single door swing Non Return Valve (IS: 5312, Part-I) with PN1.0 Pressure Rating, (Make:-IVI / UPADHYA / KIRLOSKAR/Durga/ Jupiter/MAGNET/CAIR/McWANE/Sigma Flow/ Approved Make).
i) 80mm dia. Three phase, (415V), Actuator operated Wafer type Butterfly Valve (BS: 5155) with PN1.0 Pressure Rating, having valve body of CI(IS: 210, Gr. FG: 260). & shaft of stainless steel (AISI- 410). (Make- Actuator- ROTORK/ CAIR/ Limitorque/Auma Valve – IVI / UPADHYA / KIRLOSKAR/Durga/ Jupiter/MAGNET/CAIR/McWANE/Sigma Flow/ Approved Make). (T.C. Needed).
j) Ø3 " X 2.75 mtr CIDF Pipe
k) Ø3 " X 1.0 mtr CIDF Pipe
l) Ø 3 " X 2'-6" CIDF Pipe
m) Ø 3 " X 2 ft CIDF Pipe
n) Ø 3 "Flanged tail piece
o) Ø 3"CIDF Bend
p)Steel Plug, M. S. Nipple, Flange, Nuts, Bolts etc
q) Ø 3 "M. S. Cross
b) Metallic Over load Relay of Range 1.5 to 3.0 Amp for Chlorinator. c) Level Controller Circuit for Chlorine Tank. III. Yard Lighting Arrangement. a) 9 Amp, TP, 240Volt A.C. Coil Contactor. -1no. b) Programmable Digital Timer for Auto/Manual operation. Note : The following 3 items ( a, b & c) are common for above I,II & III a) ON/OFF/ Trip Indicating Lamp for Pump Motor/Valve Actuator/Chlorinator. – 1set. b) Start/Stop, Forwarded/Reverse Push Button for Manual operation of Pump Motor, Actuator & Chlorinator. c) Power Terminals for Pump Motor/TPN Yard Lighting/ Chlorine Motor along with Level Controller/SPN internal wiring/Valve Actuator -1set. (Make: RNR/ECS/PCF Project/Jolly Engineering Pvt. Ltd./Approved Make)
Making Brick Pillar for Supporting pipe line (10" X 10 " X 4 ft) by 1st class brick work with 4 :1 plaster and net cement punning complete including earth cutting, supplying necessary materials , ramming as per direction of EIC.
Installation of the item no. (1) to (3) with necessary connection complete including supply 12core 1.5sq.mm. copper control cable compensating MS flange nut and Bolts Gasket & other fixing materials to complete the job and making platform of required size around T.W. with bricks, cement , sand stone chips etc(4:2:1) including plastering and net cement complete as per direction and entire satisfaction of the E.I.C.
Supplying & fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 16Sq.mm. XLPE Armoured cables
Finishing the end of 16Sq.mm. 4.0 core XLPE Armoured cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials with including proper sealing of cable entry point
Making necessary non metalic pipe IS-14930 (80mm. dia.) protection for submersible cable from Tube well cover to inside of the pump house including supplying pipe, Elbow, Union, short piece, socket etc. complete for the job as per direction.
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long and 1 x4 SWG Gl (Hot Dip) wire (4 Mts. long), 13 mm dia x80 mm long Gl bolts, double nuts, double washers incl. S & F 15mm dla Gl pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the ground level as below: By lSl-Medium Gl pipe.
Extra for providing masonery enclosure on the top of the earthelectrode of overall size 86.36 cm x 86.36 cm x 46 cm deep(below Ground level) complete with cemented brick work(1:6)of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm withlocking arrangement, Gl reducer including drilling of 46 nos.12 mm dia holes on the Gl pipe.
Extra for treatment of soil by using salt & charcoal or coke.
Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with Gl saddles as required and connection to equipments incl.drilling holes, with bolts, nuts, washers etc.
Supplying and fitting-fixing of earth busbar of galvanized (Hot dip) fVS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with Gl bolt,nuts,washers,spacing isolator set etc.as required Length of busbar is 0.5 mtr.
Supply, delivery and storage at site of automatically controlled diaphragm type chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10Kg/CM2 with all accessories for pump & motor, foundation bolt, suction and discharge Flange and with storage tank of dosing solution of 100Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P. 3 Phase, 1450 RPM squirrel cage TEFC induciton motor, Motor will be IE2/IE3 (Make of Machine : Swelore/Any other approved, Make of Motor : ABB / CGL /KEC / Any other approved make)
Installtion and commissioning of above supplied chlorinator with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone chips] and neat cement finish by supplyig of all required materials and testing the entire set as per direction of EIC [power will be feed from PLC Panel of pumping machinery]
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish
a) average run 5 mtr. -
Wiring with 1.1 KV grade single core PVC insulated stranded Copper wire in EI conduit and painting a) 2x2.5 sqmm wire in 19 mm conduit incl. S&F 1x14 SWG GI ECC
Supply and fitting fixing of 40A DP Isolator (Make : Havells/Standard)
Supply and delivery of LED Bulb , 20 watt, (Make-phillips/ other approved make)
Supply and fitting fixing of Ceiling fan (Make: Usha /Crompton/Havels/ other approved make) 1200mm. sweep complete with blade, rubber bush etc. including supply and fixing 2×1/1.4 PVC copper wire for down rod with making necessary connection complete.
Supply & fitting fixing of 25 watt, LED Fixture set ----------for Phillips Model no. BRP 020/10 LED (Make: Phillps/ Other Approved Make) with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C.
Supply of 4ft. 36W Double Fluorescent light fittings complete with all accessories including 2nos. 36W tube light incl. fixing light fitting on wall by means L clamp, nipple, suitable size fastner and connection by 1.5 sqmm PVC/Cu wire as to G S. Model :- TMC0552XTLD36WEBT ( Make- Philips/Havells/Bajaj/ other approved make)
Supply and fixing bulkhead light fittings on wall incl. connection. As to Gs .Make -Bajaj/Havells/ other approved make)
Supply and delivery at site A.C. 3 ph. Oil Cool type Voltage Stabilizer suitable for unbalanced input voltage with following specification. (Make: AE / Sen & Pandit / Opto Elect. / ECS /Fiji /Any Approved Make) a) Input:250-500 V, 3ph., 50HZ, 4 wire b) Output, 415V + 1% 3ph.,50HZ. c) Capacity: 20 KVA. d) Auto manual switch. IS- 9815(I) e) Raise/lower push Button. f) Single lamps to indicate and limits of input. g) Voltmeter for input and output Voltage. (Manufacturing test certificate should be produced at the time of delivery) h) With U/V.O./V.O./L protection with contractor at output side, input MCB & Ammeter etc. (TC/GC needed).
Supply the following Electrical Accessories at site.
a) 100Amp. 4 pole 415V TPN OFF load Change over Switch (Make : Standard/Havells’/ABB/Siemens)
b) 100A TPN Main Switch with re-wirable fuse link within sheet steel enclosure(make (Havels/Standard/Approved Make)
c) 25 mm², 1.1 KV grade. 3.5 core Al Armoured XLPE conform to IS 1554/7098(part-I) 1998 (Make : Gloster /HAVELLS /MESCAB/ CURRENCY/POLYCAB/ CRYSTAL/ Approved Make)
Installation of the above Voltage stabilizer of (Item No.-24 & 25) on the foundation incl. Interconnection complete & testing the voltage stabilizer along with other electrical equipments to ensure performance of the equipments in running satisfactorily as per IE Rules & as per direction of E.I.C. incl. testing commissioning complete.
Add. GST@18%
Add. Cess@1%
MAHAMAYA ENTERPRISE
CONCORD ENGINEERING
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .