8614 REPAIRS TO ROOF COVERING, FALSE CEILING, WATER PROOFING TREATMENT, BATH FITTING, PLUMBING ETC AND CERTAIN REPAIR TO PLINTH PROTECTION, HARD STANDING, GATES ETC AT ZONE B AREA OF AGE BR-II UNDER GE (CENTRAL) PUNE.

Amount

S&F Pre- painted galvalume aluminum zinc coating AZ 150 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantiling of existing sheets as in roofing/cladding all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating AZ 150 GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws including dismantling of existing sheets in roofing/cladding all as specified and directed.

DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specifed and directed.

M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling of size 600 x600x mm over and including GI powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as directed and specified

M & L for 12mm thick Seamless calcium silicate ceiling made of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish with and including Gl frame work as per site reqmt seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and incl thin layer of putty with gypsum binder, sanding the sufrace till smooth surface is obtained and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

S&F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing on page no 182 of SSR-2020 Part-II.Complete all as specifed and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawingon page no 182 of SSR-2020 Part-II.Complete all as specifed and directed.

Demolition of uneinforced cement concrete of any description and in any position on roof slab/sunken slab as in padding etc including removing rubbish off the premises out side MD land complete all as specifed and directed.

M&L for 40mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregates) finished even and smooth using extra cement as in roof padding and similar items mixed with liquid water proofing compound @ 200ml/bag of cement. Complete all as specified and directed. Note: WPC shall be measured and paid seperately.

Supply only liquid water proofing compound

Demolition of plain cement Concrete in any description cleaning the premises and removal of rubbish out side the MD land .Complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish out side MD land.Complete all as specified and directed.

M&L for plain cement concrete (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring complete all as specified and directed.

M & L for non skid ceramic coloured tiles 600X600 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20mm thick screed bed of CM 1:6 complete all as specifed and directed.

.Ditto as item no 14 above but in skirting over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M & L for Non - skid ceramic coloured tiles,size 300x300x 7 mm thick laid on floor , over and including 15mm thick screed bed in cement mortar (1:6) and pointed in white cement with pigment to match the shade of the tiles, complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface 300X 450X 7 mm/300x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of CM 1:3 complete all as specified.

Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.

S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of existing PVC water tank all as specified in SSR Part-I complete all as specified and directed.

S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of existing PVC water tank all as specified in SSR Part-I complete all as specified and directed.

S&F in repairs vitreous china single piece pedestal pattern water closet white 'P' or 'S' trap, matching sheet cover and connection to trap . including making good to floor, complete all as specified. Make Jaquar cat part no: CNS-WHT-851 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs 15mm bore chromium plated bib cock fancy type. Make Jaquar cat part no:FLR-CHR-5047N or equivalent model in KOHLER and ROCA.

S&F in repairs 15mm bore chromium plated angle cock fancy type.Make Jaquar cat part no:FLR-CHR-5053N or equivalent model in KOHLER and ROCA.

S&F in repairs Brass CP wall mixer 3-in-1 for mixing hot & cold water with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed.Make Jaquar cat part no:FLR-CHR-5281N or equivalent model in KOHLER and ROCA.

S&F in repairs brass chromium plated overhead shower 100mm round shape single flow with rubit cleaining system fitted to steel pipe or union complete.Make Jaquar cat part no:OHS-CHR-1989 or equivalent model in KOHLER and ROCA.

S&F in repairs 15mm bore chromium plated pillar cock fancy type.Make Jaquar cat part no:FLR-CHR-5015 or equivalent model in KOHLER and ROCA.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and wall hook including making connections and fixed in position complete all as specified. Make Jaquar cat part no:ALD-CHR-577 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 10cm wide with chromium plated bracket guard and railing 60cm long.Make Jaquar cat part no:CAN-CHR-1171 N or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs chromium plated soap dish approximate size 120x 120x28mm complete all as specified and directed.Make Jaquar cat part no:AKP-CHR-35731P or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges Make Jaquar cat part no:AKP-CHR-35711PS or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs 2-way Bib cock with flange Make Jaquar cat part no:FLR-CHR-5041N or Techno commercial equivalent model in KOHLER and ROCA.

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.

Supply and fixed in repairs 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as directed

Supply and fixed in repairs 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete

S&F in repair stainless Steel Kitchen rack (Overall size 24x24x10”) complete all as specified and directed. Make : Cat No. P-310 of Prayag / Blue Star / Nirali

S&F in repairs vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed including taking out old one.

S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed.

Supply and fixed in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to arf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.

Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets and 32mm dia 1mtr long PVC waste pipe.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) inclusing health faucet.

S& F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

.ditto- all as item no 46 above but 75mm bore

S&F 110mm PVC (SWR) bands fixed to PVC pipe complete all as specified and directed.

S&F 75mm PVC (SWR)bands fixed to PVC pipe complete all as specified and directed.

S&F PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

S&F PVC (SWR) cowl 75/100mm dia complete all as specifed and directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specifed and directed..

S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete all as specifed and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground including removal of debris out side defence land or removal to store complete all as specified and directed.

Dismantling fencing wire mesh, any type and inclusive of removal to store complete all as specifed and directed.

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F MS flats as bands, straps, supports or stays for securing chain link fencing to angle iron posts and welded to post in PCC during embedding complete

S&F Mild steel screws bolts (machine made) with hexagonal or square heads at one end and screwed at the other end, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5 cm long and dia diameter of neck 5 to 10mm complete all as specifed and directed.

Supply only chain link MS galvanised fencing any size or type as directed by Engr-in Charge.

Fixing only chain link, fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including , securing or tying at crossing with and provision of galvanised mild steel wie, staples or steel pins etc as directed each line wire to be measured) complete all as specifed and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specifed and directed.

S&F portions framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork and including demoiltion of existing precast cover slab for manholes complete all as specified and directed

M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

M&L for precast concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde D-5 and setting in CM 1:6 and including demolition of old brick work / Stone masonary / PCC block masonary built in cement morter of any description and removing of rubbish out side MD land complete all as specified and as directed.

M&L for brick work with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of old brick work / Stone masonary / PCC block masonary built in cement morter of any description and including removing of rubbish out side MD land complete all as specified and as directed.

M&L for Walling of random rubble, Stone masonry uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 including demolition of old brick work / Stone masonary / PCC block masonary built in cement morter of any description and including removing of rubbish out side MD land complete all as specified and as directed.

Extra over stone walling for hammer dressing with maximum depression 40 mm to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses stone masonry in cement mortar 1:4 complete all as specified and directed.

M&L for 75mm thick (1:3:6) Type-C2 (using 40mm graded crushed stone aggregate) as in plinth protection / path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for Providing 25mm thick,using 12.5 mm graded stone aggregate precast cement concrete louvres and jallies,Type B0 1:2:4 setting in CM 1:6 including all mould- ings and including dismantling of existing jallies complete all as specified.

M&L for provinding cement concrete (1:2:4) B-1 using 20mm graded aggregate as in copings /haunching/ bearing course over brick walls etc and like complete all as specified.

M&L for rubber moulded glossy chequered cement concrete coloured tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specifed and directed.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic complete all as specifed and directed. parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specifed and directed.

Taking down Cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, any description including removal of rubbish out side MD land complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick /stone surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer over external wall surfaces complete all as specified and as directed.

Dismantling cast iron work of any de scription and in any position complete all as specified and directed.

SHREESAMARTH CONSTRUCTION (BID ID -3388118)

Santosh Pandurang Pise (BID ID -3388254)

Sujitha Infrastructure (BID ID -3387732)

SAI TILES ARTS (BID ID -3388312)

DURGA CONSTRUCTION & TRANSPORT (BID ID -3388382)