WBPWD/EE/NKHED/NIQ-51/3rd Call /19-20

Amount

SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd. Make : OTIS / KONE/SCHINDLER Type: Bed cum passenger Lift . Load : 26Passenger/1768Kg Control : Microprocessor based with AC variable voltage & variable frequency ( VVVF) Machine -- Energy efficient machine, Geared/Gearless, with Machine Room. Speed:- 1Mtrs/Sec

Floor served :- G+7 Landing: 08 (Eight), all on same side Total Rise -25.00Mtr Operation : Microprocessor based Simplex full collective with or without attendant. Signals : Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. Buttons: all buttons on car & landing shall be luminous & encoded with braille Leveling accuracy : ±5mm Micro levelling arrangement CAR Car inside : -1600mm(W) x 2400mm (D) x 2200mm(H)

Car Entrence : Clear opening 1200mm (W) x 2000mm (H) protected with car door. Car Encloser : Stainless Steel Sheet (20 SWG) with hairline finish with hand rail. Car ceiling & Lighting : Stainless steel with hairline finish with LED lighting & fan Car Ventilation- Pressure fan with anodized aluminium grill. Car Flooring: Decorative granite flooring (As per direcion of EIC and according to this Department's Order).

Car Door : Stainless center opening (COPD/Telescopic) automatic door provided with V3F controlled door drive system Landing Door- Stainless steel Center opening door / telescopic operated synchronizing with car door. Door Opening - Automatic power oprated door with full length Photocell assembly light curtain sensor PROTECTIVE DEVICES & OTHER ACESSORIES

ARD- Automatic rescue device complete with dry maintenance free batteries as required. for automatic evacuation to the nearest floor in case of power failure / single phasing/others. Overload Protection -Fully loaded with overload protection. On overloading the lift car will not start with door remaining open and give audio & display indication Emergency lighting in car- Battery operated emergency lighting in the lift car.

Intercom system : Battery operated intercom system in Lift Car, Machine Room & Control Room Emergency Alarm: Battery operated alarm bell system in lift car and control room Fireman switch - Fireman switch at main landing terminal.

Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Main rope/Belt - As per manufacturer's standard conforming to IS DIMENSION OF SHAFT & POWER SUPPLY

Available Shaft Dimension 2650 mm (Wide) X 2900mm(Depth) Pit Depth : 1600mm Overhead : 4700 mm Electric power supply AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS

Special Terms & Conditions :- i) The Agency must procure the materials from the Manufacturer / OEM or from their authorized. Sales channel so that the standard warranty / Support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. ii) Documents that authenticates such procurement form the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM /authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work/submission of bill. iii) If any refurbished material is supplied and installed, panel action will be taken as per existing rules.

Rate should be quoated including all taxes and duties