Loading
Loading…
Loading…
Tender Value
₹7.6 Cr
EMD Value
₹5.3 L
Closing Date
24 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELEC/C/ER
21 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Credentials if submitted in foreign currency shall be converted into Indian currency i.e., Indian Rupee as under: The conversion rate of US Dollars into Rupees shall be the daily representative exchange rates published by the Reserve Bank of India or entity authorized by RBI to do so for the relevant date or immediately previous date for which rates have been published. Where, relevant date shall be as on the last day of month previous to the one in which tender is invited. In case of any other currency, the same shall first be converted to US Dollars as on the last day of month previous to the one in which tender is invited, and the amount so derived in US Dollars shall be converted into Rupees at the aforesaid rate. The conversion rate of such currencies shall be the daily representative exchange rates published by the International Monetary Fund for the relevant date or immediately previous date for which rates have been published.
Complete details of various conditions, definitions, clarification of Financial Eligibility including the requirement for JVs and other entities are available in the attached tender document
In support of fulfillment of specified financial eligibility criteria, the tenderer has to submit the relevant documents (scanned copy in PDF format of the original document) with their e-offer. TENDERS NOT ACCOMPANIED BY DOCUMENTARY EVIDENCE IN SUPPORT OF FINANCIAL ELIGIBILITY CRITERIA WILL BE SUMMARILY REJECTED.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
(b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Note for above-mentioned a and b: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organi0sation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Complete details of various conditions, definitions, clarification of Technical Eligibility including the requirement for JVs and other entities are available in the attached tender document.
In support of fulfillment of specified minimum technical eligibility criteria, the tenderer has to submit the credential certificate (scanned copy in PDF format of the original document) with their e-offer for the physical completion of the similar nature of work. TENDERS NOT ACCOMPANIED BY DOCUMENTARY EVIDENCE IN SUPPORT OF ELIGIBILITY CRITERIA FOR SIMILAR NATURE OF WORK WILL BE SUMMARILY REJECTED.
Defination of Similar Work :- Execution and commissioning of any one or more of "HT (6KV, 11KV, 33KV) cablings; HT (6KV, 11KV, 33KV) overhead lines; HT (6KV, 11KV, 33KV) panels; 6/0.415 KV, 11/0.415 KV, 33/0.415 KV substation equipments; HT crossings and modification work and other associated works etc. including commissioning of the HT system" on Railways, Airports, Defence establishment, CPWD, State Govt. Secretariat, SEB's, Public Sector Undertakings and any other Government departments etc.
28 conditions · 16 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Certificate as per the proforma enclosed vide Annexure-V(A), of Chapter-II of the attached Tender Document [Document uploading is Mandatory, if applicable to the Bidder].
If Bid Security is submitted through mode of Bank Guarantee, then submission of scanned copy of the Bank Guarantee towards Bid Security of the bid on e-tendering portal (IREPS) and original of above Bank Guarantee before closing date for submission of bids as per Para-5 of Instructions to Tenderers (ITT) in Chapter-II attached Tender Document. [Document uploading is Mandatory in case the mode of submission of Bid Security is Bank Guarantee]
All documents in support of fulfillment of Technical Eligibility Criteria as per Para 10.1 & Para 17.15.1 of Chapter-II of attached Tender Document.
All documents in support of fulfillment of Financial Eligibility Criteria as per Para 10.2 & 17.15.2 of attached Tender Document, duly filled up Annexure-VIB of Chapter-II along with Certificate issued from Chartered Accountant.
Bid Capacity as per Para 10.3 & 17.15.3 duly filled up Annexure- VI of Chapter-II of attached Tender Document (Applicable in tender having advertised value more than Rs.20 Crores). [Document uploading is Mandatory in case the advertised value of the instant tender more than Rs.20 Crores]
Certificate as per the proforma enclosed vide Annexure-V of Chapter-II of attached Tender Document.
All documents as mentioned in Clause 14 of Chapter-II of the attached Tender Document
Power of attorney duly notarized and in favor of a single individual should be submitted as per Clause 15 of Chapter-II of the attached tender document [Document uploading is Mandatory if applicable to the Bidder]
All documents as mentioned in Clause 17 of Chapter-II of the attached Tender Document for JV in works tender [Document uploading is Mandatory if applicable to the Bidder]
All documents as mentioned in Clause 18 of Chapter-II of the attached tender document for Partnership firm in works tender. [Document uploading is Mandatory if applicable to the Bidder]
Details regarding the Association of Railway Officers with the tenderer [for details please refer Annexure-A of Chapter-I of attached Tender Document].
Details of existing commitments and balance amount of ongoing works with the tenderer and Value of completed works/executed works and payment received during the current and /last three financial years immediately preceding the current financial year, upto date of inviting of tender. (for details, please refer Annexure-B of Chapter-I of attached Tender Document).
Details of the List of the Arbitration & Court cases during the last 3 years [for details please refer Annexure-C of Chapter-I of attached Tender document].
Details of technical personnel, proposed to be engaged by agency for details please refer Annexure-E(ii) of Chapter-I of attached Tender Document
Details of NEFT (in PDF format) as per Annexure F of Chapter-I of the attached Tender Document.
The tenderer should upload scanned copy in PDF format of a cancelled cheque leaf as per requirement of NEFT Mandate.
Tender Form as per Annexure-I of Chapter-II of attached Tender document duly signed by tenderers/tenderer.
Details of agency's own equipment proposed to be included [for details please refer Annexure-D(i) of Chapter-I of attached Tender document].
Details of hired equipment to be included [for details please refer Annexure-D(ii) of Chapter-I of attached Tender document].
Details of technical personnel of the agency, available on hand [for details please refer Annexure-E(i) of Chapter-I of attached Tender Document]
Details of technical personnel, proposed to be engaged by agency [for details please refer Annexure-E(ii) of Chapter-I of attached Tender document].
Electrical Contractor's License: The Contractor shall obtain a valid electrical contractor license for required voltage grade from the concerned statutory authority before taking up the physical execution of work and submit a copy of the same to concerned Railway project in-charge.
"Shifting/Removal /Diversion /Modification work of Electrical infringement works located in alignment and nearby construction site area in connection with construction of DFCC line in between Barakar to New Andal station of Asansol Division of Eastern Railway."
EL-ASN-CON-TRL-181-2026
EL-ASN-CON-TRL-181-2026
Open
Works - General
9 Months
Kolkata, West Bengal
₹0
₹5.3 L
24 Mar 2026
24 Feb 2026
10 Mar 2026
96 items across 4 schedules · ₹7,63,19,914.47 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | MS Rail Pole 60KG/M(MS RAIL 60 KGS PER METRE INDUSTRIAL USE (IU GRADE OF SAIL) IN LENGTHS OF 13 METRE EACH) | Numbers | 133.00 | 40,513.2 | 53,88,255.6 |
| 2 | MS CHANNEL SIZE 100MM x 50MM x 6MM (4" x 2" x 1/4")(MS CHANNEL ISMC 100 SIZE 100MM X 50MM X 6 MM (4" X 2" X 1/4") MINIMUM WEIGHT 9.2 KGS PER METRE) | Kg | 7700.00 | 74 | 5,69,800 |
| 3 | CI Spacer Block for 60 Kg Rail suitable for MS RAIL 60 KGS PER METRE INDUSTRIAL USE (IU GRADE OF SAIL) IN LENGTHS OF 13 METRE EACH. | Numbers | 525.00 | 300 | 1,57,500 |
| 4 | MS FLAT SIZE 50 MM x 10 MM (2" x 3/8") | Kg | 3090.00 | 67 | 2,07,030 |
| 5 | MS Black pipe 2" | Metre | 710.00 | 380.76 | 2,70,339.6 |
| 6 | 11KV polymaric Disc insulator(POLYMERIC COMPOSITE DISC INSULATOR 11 KV, CREEPAGE DISTANCE (MIN) 320 MM. WITH METAL END FITTINGS) | Numbers | 138.00 | 238.06 | 32,852.28 |
| 7 | 11KV polymaric Pin insulator(11 Kv 5 Kn composite polimaric pin insulator with IEC 61109-2008 with latest amenmed standard) | Numbers | 190.00 | 540 | 1,02,600 |
| 8 | ACSR 0.1 SQ. INCH CONDUCTOR (CODE NAME 'DOG')(ACSR 0.1 SQ. INCH CONDUCTOR (CODE NAME 'DOG') STRANDS, STEEL 7/0.062", ALUMINIUM 6/0.186", AS PER IS 398/1961 AMMENDED UP TO DATE) | Metre | 5350.00 | 105 | 5,61,750 |
| 9 | ACSR 0.6 SQ. INCH CONDUCTOR (ACSR 0.06 SQ. INCH CONDUCTOR STRANDS, AS PER IS 398/1961 AMMENDED UP TO DATE) | Metre | 150.00 | 67.26 | 10,089 |
| 10 | ACSR 0.15 SQ. INCH (ACSR 0.15 SQ. INCH CONDUCTOR STRANDS, AS PER IS 398/1961 AMMENDED UP TO DATE) | Metre | 4000.00 | 105 | 4,20,000 |
| 11 | Al. Strain Clamp 0.1 sq inch(Strain Clamp 3 BOLT TYPE, HEAT TREATED FORGED ALUMINIUM ALLOY. . G.D.C 120KN WITH BOLTS NUTS WASHERS SPLIT PINS <(>& <)> 3 U BOLTS NUTS ETC FOR 0.1 SQ.IN. ACSR (IS:2486)) | Numbers | 138.00 | 417.68 | 57,639.84 |
| 12 | Al. Strain Clamp 0.15 sq inch(Strain Clamp 3 BOLT TYPE, HEAT TREATED FORGED ALUMINIUM ALLOY. . G.D.C 120KN WITH BOLTS NUTS WASHERS SPLIT PINS <(>& <)> 3 U BOLTS NUTS ETC FOR 0.1 SQ.IN. ACSR (IS:2486)) | Numbers | 42.00 | 417.68 | 17,542.56 |
| 13 | Cross-arm Strap(TWISTED CROSSARM STRAP, HOTDIP GALVANISED, SUITABLE FOR 100X50MM MS CHANNEL <(>&<)> 120KN DISC INSLTR WITH BOLT,NUT SPRING WASHER <(>&<)> SPLIT PIN AS PER IS 2486) | Pair | 138.00 | 169.85 | 23,439.3 |
| 14 | ALUMINIUM BINDING WIRE 9 SWG (DIAMETER: 3.658 MM ( 0.144" ) | Kg | 48.50 | 389 | 18,866.5 |
| 15 | Wedge connector 0.1 sq. inch(Dog-Dog Wedge Connector (0.1 to 0.1)Al. Alloy, IS 5561-1970 (Reaffirmed 2002), IS 5561- 2018) | Numbers | 258.00 | 261.4 | 67,441.2 |
| 16 | Wedge Connector for 0.15 ACSR wolf conductor(Wolf-Wolf Wedge Connector (0.15 to 0.15)Al. Alloy, IS 5561-1970 (Reaffirmed 2002), IS 5561-2018 ) | Numbers | 168.00 | 451.26 | 75,811.68 |
| 17 | G.I. Burbed Wire(GI BARBED WIRE, 2 PLY, 12 SWG, 2.642 MM (0.104") EACH WIRE, 4 POINT BARBS 3" APART) | Kg | 342.00 | 99.4 | 33,994.8 |
| 18 | Danger Board(DANGER BOARD 13 1/2" x 5 1/2" RED BACK GROUND WITH WHITE COLOUR LETTER 11KV) | Numbers | 49.00 | 81.38 | 3,987.62 |
| 19 | G.I. Wire 7/8 S.W.G(GI STAY WIRE,STRANDED <(>&<)> TWISTED, 7/8 SWG, OVERALL DIA:12MM, INDIV WIRE DIA:4MM (+/-0.1), WT:695 KGS / KM, MALLEABLE , MIN BREAK LOAD:5962KGS, MIN UTS:71.4KG/SQ MM, IS:4826 -1979 (HEAVY COAT GALV.)) | Kg | 2474.00 | 112.1 | 2,77,335.4 |
| 20 | Guy Insulator(GUY INSULATOR, BROWN COLORED PORCELAIN GLAZED, HAVING DIMENSION 140MM X 85MM X 25MM , MINIMUM CREEPAGE DISTANCE:57 MM, DRY POWER FREQ. WITHSTAND VOLTAGE : 27 KV WET POWER FREQ. WITHSTAND VOLTAGE:13 KV, MINIMUM FAILING LOAD:88 KN. THE GUY INSULATORS SHOULD CONFORM IS: 5300/1969 LATEST AMENDMENT) | Numbers | 183.00 | 160 | 29,280 |
| 21 | GI Guy Set 7/8" (22 mm) complete(GI GUY SET 7/8" (22MM) COMPLETE WITH 1200 MM LONG STAY ROD (Welded square section to lock the Stay Plate), RATCHET NUT, STAY BOW, EYE BOLT,THIMBLE, STAY PLATE(300X300X6MM), NUTS, WASHERS ETC) | Numbers | 183.00 | 1,670 | 3,05,610 |
| 22 | GI FLAT SIZE: 3/2" x 1/4"(GI FLAT SIZE:3/2" x 1/4") MINIMUM ZINC DEPOSITION FOR GALVANISATION 630 GMS PER SQ. METRE) | Kg | 420.00 | 100.73 | 42,306.6 |
| 23 | GI FLAT SIZE:25MM X 6MM ( 1" x 1/4")((GI FLAT SIZE:1" x 1/4") MINIMUM ZINC DEPOSITION FOR GALVANISATION 630 GMS PER SQ. METRE) | Kg | 480.00 | 91 | 43,680 |
| 24 | ACSR 0.03 SQ. INCH CONDUCTOR(ACSR 0.03 SQ. INCH CONDUCTOR (CODE NAME 'WEASEL') STRANDS, STEEL 1/0.102", ALUMINIUM 6/0.102", AS PER IS 398/1961 AMMENDED UP TO DATE) | Metre | 950.00 | 31.95 | 30,352.5 |
| 25 | Lightning Arrestor(12 KV 10 KA POLYMERIC METAL OXIDE SURGE ARRESTOR DISTRIBUTION CLASS OUTDOOR TYPE POLE MOUNTED (AS PER IS:3070) | Numbers | 63.00 | 2,604.34 | 1,64,073.42 |
| 26 | Lightning Arrestor(36 KV 10 KA POLYMERIC METAL OXIDE SURGE ARRESTOR DISTRIBUTION CLASS OUTDOOR TYPE POLE MOUNTED (AS PER IS:3070) | Numbers | 6.00 | 12,480 | 74,880 |
| 27 | 11KV 800A GOAB(GOAB ISOLATOR, 11KV 8 0 0 A , SINGLE BREAK, VERTICAL MOUNT, TRIPLE POLE, 4 POST INSULATORS PER POLE COMPLETE WITH GI CHANNEL, , CONNECTORS ETC. AS PER IS:9921 (PART IV) & IS:9385) | Numbers | 4.00 | 31,663.34 | 1,26,653.36 |
| 28 | 11KV 400A GOAB(GOAB ISOLATOR, 11KV 400A, , SINGLE BREAK, VERTICAL MOUNT, TRIPLE POLE, 4 POST INSULATORS PER POLE COMPLETE WITH GI CHANNEL, CONNECTORS ETC. AS PER IS:9921 (PART IV) <(>&<)> IS:9385) | Numbers | 6.00 | 31,925 | 1,91,550 |
| 29 | Control Cable 12 Core(CONTROL CABLE, 12 CORE, MULTISTRANDED, ARMOURED, COPPER CONDUCTOR, 1100 VOLT GRADE, SIZE:2.5 SQ.MM). | Metre | 100.00 | 501 | 50,100 |
| 30 | CTPT Set(POLE MOUNTED CT-PT COMBINED METERING SET, RATED VOLTAGE: 11KV, HSV: 12KV, BIL: 12/28/75 KVp, 50 Hz, Insulation Class : A, PT RATIO: 11000/V3/110V3 Volts,VA : 50, CL : 0.2, Phase :Y/Y, VF - 1.2 times for cont. <(>& <)> 1.9 times for 1 min IS : 3156/1992 (reviewed year 2012 ), CT RATIO: 20-10/5 A, BURDEN: 15 VA, CL : 0.5, STC: 26.3 KA FOR 3 SEC, IS 2705/1992 CONNECTION: 3 PHASE, 3 WIRE TYPE, PT FOR R.Y AND B PHASE, CT FOR R AND B PHASE. GTP and Drawing should be submitted and approved by IPCL authority before finalization). | Each | 2.00 | 79,100.28 | 1,58,200.56 |
| 31 | GI EARTHING PIPE 50 MM DIA 2.5 MTR | Each | 65.00 | 1,227.32 | 79,775.8 |
| 32 | Supply and fixing CABLE JOINTING KIT,HEAT SHRINKABLE,OUTDOOR END TERMINATION KIT,SUITABLE FOR 11KV( E) XLPE CABLE FOR 3C x 300 SQMM | Numbers | 78.00 | 6,500 | 5,07,000 |
| 33 | Supply and fixing CABLE JOINTING KIT,HEAT SHRINKABLE,OUTDOOR END TERMINATION KIT,SUITABLE FOR 33KV( E) XLPE CABLE FOR 3C x 400 SQMM | Numbers | 8.00 | 25,000 | 2,00,000 |
| 34 | RCC CABLE PROTECTION COVER (Marked - I P C L cable with respective Voltage,2 feet,Red colour,Reinforecment cage(12swg)/length 558mm and width 180mm/drop test from a hight 4 feet/ mix strenght ratio 1:1:5:3) | Numbers | 17420.00 | 49.11 | 8,55,496.2 |
| 35 | HDPE Pipe 8"(HDPE PIPE 8" DIA(200 MM),PN CLASS : PN 8, MATERIAL GRADE: PE 100, LENGTH OF PIPE : 6 METER PER OF EACH LENGTH, IS :49842016, Required for protection for power cable while any type crossing) | Metre | 744.00 | 1,309.17 | 9,74,022.48 |
| 36 | GI Earth Wire, Stranded and twisted, 7/12 | Kg | 450.00 | 113.48 | 51,066 |
| 37 | MS Angle 2" x 2" x 0.25" | Kg | 2250.00 | 74 | 1,66,500 |
| 38 | GI Eye Bolt 5/8"x3" | Numbers | 52.00 | 125.82 | 6,542.64 |
| 39 | GI Eye Bolt 1/2"x9" | Numbers | 52.00 | 86.03 | 4,473.56 |
| 40 | PG Clamp 0.15 Sq.inch | Each | 8.00 | 467.55 | 3,740.4 |
| Schedule total | ₹1,23,61,578.9 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
2daTenderDocumentVolI181_compressed.pdf Tender document 181
ATTACHMENT
TenderNotice.pdf
ATTACHMENT
2daTenderDocumentVolI181_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .