REPAIR MAINTENANCE AND PAINTING POLISHING OF WOODEN AND STEEL FURNITURE OF INHS ASVINI UNDER GE NW KUNJALI COLABA MUMBAI

Amount

8 drawer almirah clerical (Drg No - TP)

M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified and directed shown on trade pattern drawing.

Removing of unserviceable locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for almirah clerical with 8 drawer complete all as specified and directed .

Removing of unserviceable broken handles and providing new handle steel chromium plated for almirah clerical with 8 drawer complete all as specified and directed .

Steel cupboard for medicine (Drg No - VSDU-8)

M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified and directed

Removing of unserviceable locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for steel cupboard for medicine complete all as specified and directed .

Removing of unserviceable /broken handles and providing new handle steel chromium plated for steel cupboard for medicine complete all as specified and directed .

Cupboard for general purpose (Drg No - VSDU-6)

M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed

Removing of unserviceable locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for cupboard for general purpose complete all as specified and directed .

Removing of unserviceable broken handles and providing new handle steel chromium plated for cupboard for general purpose.

Cupboard for surgeon (Drg No - VSDU-4)

M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed and shown on drgs.

Removing of unserviceable locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for ward care bed side lockers complete all as specified and directed .

Removing of unserviceable broken handles and providing new handle steel chromium plated for cupboard for surgeon complete all as specified and directed .

Bed side cupboard for patient (Drg No- VSDU-5)

M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed and shown on drgs.

Removing of unserviceable locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for ward care bed side lockers complete all as specified and directed .

Removing of unserviceable broken handles and providing new handle steel chromium plated for bedside cupboard for patient complete all as specified and directed

Storage rack (Drg No-TP) M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed and shown on drgs.

Ward care bed side lockers (Drg No-TP)

M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed and shown on drgs.

Removing of unserviceable locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for ward care bed side lockers. complete all as specified and directed

M&L for gas welding of ward care bed side lockers wherever required complete all as specified and directed .

4 drawer book case with glass (Drg No-TP)

M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed and shown on drgs.

Removing of unserviceable locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for all the four drawers of book case complete all as specified and directed .

Removing of old/broken glass from drawer of book case & providing new glass (required size) of thickness 5mm complete all as specified and directed and shown on drgs.

Cabinet filling steel 2 drawer (Drg No- FD-293)

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primercomplete all as specified and directed and shown on drgs.

Removing of unserviceable locks and providing new locks of size 50mm 4 lever with brass lever and steel casing and stainless steel keys in duplicate for cabinet filling with two side drawer complete all as specified and directed .

Cabinet filling 2 drawer lateral type (Drg No- FD-293)

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed and shown on drgs.

Removing of unserviceable locks and providing new locks of size 50mm 4 lever with brass lever and steel casing and stainless steel keys in duplicate for cabinet filling two drawer lateral type complete all as specified and directed .

Cabinet filling steel 4 drawer (Drg No-FD-293)

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paintwith spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed and shown on drgs.

Removing of unserviceable locks and providing new locks of size 50mm 4 lever with brass lever and steel casing and stainless steel keys in duplicate for cabinet filling with four side drawer complete all as specified and directed .

Cabinet filling steel vertical type (Drg No- FD 293)

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed and shown on drgs.

Removing of unserviceable locks and providing new locks of size 50mm 4 lever with brass lever and steel casing and stainless steel keys in duplicate for cabinet filling steel vertical type complete all as specified and directed .

Chair revolving PCH (Drg No- PCH-7042R,7002D,7031,7041)

Removing of unserviceable seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of Foam : Sleepwell/Corfom/Kurl-on

Removing of unserviceable back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed . Make of Foam : Sleepwell/Corfom/Kurl-on

Material and labour for gas welding of chair revolving wherever required complete all as specified and directed .

Removal of unserviceable PVC wheel supply and fixing new PVC wheel best quality and approved by GE.

Removal of unserviceable arms S&F new arms PVC best quality and approved by GE.

Chair PCH fixed (Drg No-PCH-7044R,7004D, 7042T, 7002, 7004, 7001, 7034, 7032)

Removing of unserviceable seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed . Make of Foam : Sleepwell/Corfom/Kurl-on

Removing of unserviceable back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50 mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of Foam : Sleepwell/Corfom/Kurl-on

Material and labour for gas welding of chair PCH fixed wherever required complete all as specified and directed .

Removal of unserviceable arms S&F new arms PVC best quality and approved by GE complete all as specified and directed .

Chair conference (PCH-7003 D) (Drg No-PCH-7003D)

Removing of unserviceable seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed . Make of Foam : Sleepwell/Corfom/Kurl-on

Removing of unserviceable back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of Foam : Sleepwell/Corfom/Kurl-on

Material and labour for gas welding of chair conference wherever required complete all as specified and directed .

Removal of unserviceable arms S&F new arms PVC best quality and approved by GE.

Chair 5 prong with arm of computer (Drg No-GE (K) FD-64/84, FD/E6/MAP/01)

Removing of unserviceable seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of Foam : Sleepwell/Corfom/Kurl-on

Removing of unserviceable back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of Foam : Sleepwell/Corfom/Kurl-on

Material and labour for gas welding of chair 5 prong with arm wherever required

Removal of unserviceable PVC wheel supply and fixing new PVC wheel best quality and approved by GE.

Removal of unserviceable arms S&F new arms PVC best quality and approved by GE.

Chair 5 prong revolving without arms (Drg No-GE (K) FD-52/88)

Removing of unserviceable seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of Foam : Sleepwell/Corfom/Kurl-on

Removing of unserviceable back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed Sleepwell/Corfom/Kurl-on

Chair Executive Revolving High Back (Drg No-PCH-7001D)

Removing of unserviceable seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of Foam : Sleepwell/Corfom/Kurl-on

Removing of unserviceable back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of Foam : Sleepwell/Corfom/Kurl-on

Material and labour for gas welding of chair executive revolving high back revolving wherever required complete all as specified and directed

Removal of unserviceable PVC wheel supply and fixing new PVC wheel best quality and approved by GE.

Removal of unserviceable arms S&F new arms PVC best quality and approved by GE.

Chair Visitor (Drg No- TP)

Removing of unserviceable seat and supply/fixing new seats made out of 12mm thick plywood both sides commercial uphostered with foam of 32 density x 50mm thick covered with tapestry cloth of approved by GE. Tapestery cloth prices not less than 350 per Rm apply as per best trade practice to be fitted with MS screws with nuts and bolts (Screws) of required size of seats as per drg complete all as specified and directed. Make of Foam : Sleepwell/Corfom/Kurl-on

Removing of unserviceable back and supply/fixing new back made out of 12mm thick plywood both side commercial uphostered with foam 32 density x 50mm thick covered with tapestry cloth of approved quality of prices and range 350 per RM apply as per trade practicle to be fitted with Ms screws with nuts and bolts of required size of back complete all as specified and directed. Executive Revolving High Back Make of Foam : Sleepwell/Corfom/Kurl-on

Material and labour for gas welding of chair visitor wherever required complete all as specified and directed

Removal of unserviceable arms S&F new arms PVC best quality and approved by GE.

Chair Auditorium (Drg No-TP)

Removing of unserviceable seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of foam :- Sleepwell/Corfom/Kurl-on

Removing of unserviceable back and supply/fixing new back made out of 12mm thick plywood both side commercial uphostered with foam 32 density x 50mm thick covered with leatherite rexian cloth of approved quality of prices range not less than 450 per RM apply as per trade practicle to be fitted with MS screws with nuts & bolts of required size of back complete all as specified and directed. Make of foam :- Sleepwell/Corfom/Kurl-on

M&L for gas welding of chair auditorium wherever required complete all as specified and directed

Removal of unserviceable PVC arms S&F of new PVC arms best quality and approved by GE.

M&L for PVC beading of chair auditorium wherever required of pvc beading and replacement of new pvc beading best quality as approved by GE.

Chair sitting Drg No. (PCH-7003) (Drg No-PCH-7003)

Removing of unserviceable seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed . Make of foam :- Sleepwell/Corfom/Kurl-on

Removing of unserviceable back and supply/fixing new back made out of 12mm thick plywood one sides commercial uphostered with 32 density x50mm thick covered with leatherite rexin cloth of approved by GE. Tapestery cloth prices not less than 350 per RM apply as per best trade practice to be fitted with MS screws with nuts and bolts (Screw) of required size of back as per drg complete all as specified and directed. Make of foam :- Sleepwell/Corfom/Kurl-on

Removing of unserviceable PVC wheel S&F new wheel best quality as approved by GE.

Removing of unserviceable arms S&F new arms of chair best quality as approved by GE.

M&L for gas welding of chair sitting wherever required complete all as specified and directed

Chair cushion with arms for classroom (Drg No-TP)

Removing of unserviceable seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of foam :- Sleepwell/Corfom/Kurl-on

Removing of unserviceable back and supply/fixing new back made out of 12mm thick plywood one sides commercial uphostered with 32 density x50mm thick covered with leatherite rexin cloth of approved by GE. Tapestery cloth prices not less than 350 per RM apply as per best trade practice to be fitted with MS screws with nuts and bolts (Screw) of required size of back as per drg complete all as specified and directed. Make of foam :- Sleepwell/Corfom/Kurl-on

Removing of unserviceable arms S&F new arms for chair of best quality as approved GE

M&L for gas welding of chair cushion with arm for class room wherever required complete all as specified and directed

Table conference (Qty-05 Nos) (Drg No-TP)

Removing unserviceable broken Leg and providing new leg made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polishing table conference completely all as shown on drawing and as specified

Removing unserviceable broken rail and providing new rail made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polishing table conference completely all as shown on drawing and as specified

Replacement of unserviceable top from table conference and providing new top made out of 18 mm thick pre laminated MDF board (medium density fibre board) confirming to IS 3087-2005 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Table T-8/T-9/ Table sunmica top/ Table T-400/Round Table 900mm/ Table T/ Table TL-104/ Table TL-401/ Table T-261/ Table WT-718 (Drg No-T-8, T-9, T-400, TL-104, TL-401, T-261, WT, 718)

Removing of unserviceable locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for TableT-8/T-9/T-400/TL-104/TL-401/T-261/T-WT-718 complete all as specified and directed

Replacement of unserviceable top from the above tables and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-2005 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing of unserviceable broken handles and providing new handle steel chromium plated for TableT-8/T-9/T-400/TL-104/TL-401/T-261/T-WT-718

Over Bed Table (Drg No - KA-3330)

Replacement of unserviceable top of over bed table and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-2005 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg complete all as specified and directed .

Removal of unserviceable PVC wheel supply and fixing new PVC wheel best quality and approved by GE.

Sofa single seater (Drg No- FD-258,281,373)

M&L for removing the existing unserviceable tapestry cloth, cushion of sofa set and replacing with new tapastry cloth including marking cloth with foam cushion 40 density 100mm thick of size 530mm x 560mm x 100mm, Make -Kurl-on, Sleepwell, Springwell etc rest all as shown on drg and as directed by Engr-in-Charge. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapastry cloth shall be of mat finish and shall not less than Rs. 350/- per metre and as approved by GE

M&L for removing the existing unserviceable front leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg complete all as specified and directed

M&L for removing the existing unserviceable rear leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg complete all as specified and directed

M&L for removing existing unserviceable Arm rest from Sofa and providing new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg and complete all as specified and directed

M&L for removing existing unserviceable side rail from Sofa single seater and providing new first class teak wood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg complete all as specified and directed

M&L for removing existing unserviceable front rail from Sofa three seater and providing new first class teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg complete all as specified and directed

M&L for Removing existing unserviceable front rail from Sofa two seater and providing new first class teak wood front rail of size 35mmx 100mm x 1060 mm, rest all as shown on drg complete all as specified and directed

M&L for removing existing unserviceable front rail from Sofa single seater and providing new first class teak wood front rail of size 35mm x 10mm x 530 mm, rest all as shown on drg complete all as specified and directed

PVC Shoes shall be provided for sofa set legs of approved Make and Quality complete all as specified and directed

Examination steel couch with/without drawer (Drg No-KB-1170/1180)

Removing of unserviceable cushion from couch and supply/fixing new cushion of size (2100x560x100mm) made out of 12mm thick plywood one side commercial uphostered with 32 density x100mm thick covered with rexin as approved by GE fitted with MS screws with nuts and bolts (Screw) of required size of seat as per drg complete all as specified and directed . Note : Single cushion of the required size should be provided to the examination steel couch. Make of foam :- Sleepwell/Corfom/Kurl-on

Removing of unserviceable drawer and S&F drawer made of 20 gauge MS Sheet duly finished with standard workmanship for examination couch including preparation of surface & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed and shown on drgs.

S&F MS Lock (6 lever brass levers) with duplicate keys for drawers/shutters complete all as specified and directed and shown on drgs.

M&L for preparation of steel surafce of examination steel couch applying two coats of synthetic enamel paint shade as approved over a coat of steel primer complete all as specified and directed

Patient examination stool with out back (Drg No-TP)

Removing of unserviceable seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and directed. Make of foam :- Sleepwell/Corfom/Kurl-on

M&L for preparation of steel surfaces applying two coats of synthetic enamel paint and over coat of steel primer complete all as specified and directed shown on drg.

Desk (Drg No-TP)

Removing of unservicable top from desk & providind/fixing with new top made out of prelaminated MDF board 18mm thick complete all as specified and directed and shown on drg.

Removing of unservicable bottom from desk & providind/fixing with new bottom made out of prelaminated MDF board 18mm thick complete all as specified and directed shown on drg.

Removing of unservicable side from desk & providind/fixing with new side made out of prelaminated MDF board 18mm thick complete all as specified and directed and shown on drg.

Removing of unserviceable back plywood from desk & providing/fixing new plywood 6mm thick BWR grade & french polishing complete all as specified and directed

Work Desk for microscope (Drg No-TP)

Removing of unservicable top from work desk & providind/fixing with new top made out of 1st class hardwood teakwood complete all as specified and directed and shown on drg.

Removing of unservicable bottom from work desk & providind/fixing with new bottom made out of made out of 1st class hardwood teakwood complete all as specified and directed and shown on drg.

Removing of unservicable side from desk & providind/fixing with new side made out of 1st class hardwood teakwood complete all as specified and directed and shown on drg.

Removing of unserviceable back from desk & providing/fixing new back made out of 1st class hardwood teakwood complete all as specified and directed and shown on drg .

Receptacle small/large with bucket

Removing old parts of receptical and refixing the same by welding after proper denting complete all as specified and directed. Note: Cost of repair reveting and pins etc shall be deemed to be included in the quoted rates.

Material and labour for painting external surface of the receptacle with two coated of aluminium paint over a coat of red oxide primer including the preparation of the surface complete all as specified and directed .

Book Case (special type) TP

Removing of unservicable top from book case & providind/fixing with new top made out of prelaminated MDF board 18mm thick complete all as specified and directed and shown on drg.

Removing of unservicable side from book case & providind/fixing with new side made out of prelaminated MDF board 18mm thick complete all as specified and directed and shown on drg.

Removing of unservicable shelf from book case & providind/fixing with new shelf made out of prelaminated MDF board 18mm thick complete all as specified and directed and shown on drg.

Removing of unservicable shutter from book case & providind/fixing with new shutter made out of prelaminated MDF board 18mm thick complete all as specified and directed and shown on drg.

Removing of unserviceable back plywood from book case & providing/fixing new plywood 6mm thick BWR grade & providing 4mm thick teak wood beading for wherever necessary & french polishing complete all as specified and directed .

Removing of unservicable leg frame from book case & providing with new leg frame made out of 1st class hard wood teak & including french polishing complete all as specified and directed and shown on drawing

Almirah mess utensil (Drg TP)

Removing of unservicable shelf of size (1025x420x19mm) from almirah mess utensil & providind/fixing new shelf of the same size made out of 1st class hard wood indian seasoned teak wood complete all as specified and directed and shown on drg.

Removing of unservicable shelf of size (1025x270x19mm) from book case & providind/fixing new shelf of the same size made out of 1st class hard wood indian seasoned teak wood complete all as specified and directed and shown on drg.

Removing of unserviceable back plywood from almirah mess utensil & providing/fixing new plywood 6mm thick BWR grade & providing 4mm thick teak wood beading for wherever necessary & french polishing complete all as specified and directed

Removing of unservicable shutter from almirah mess utensil & providind/fixing with new shutter made out of prelaminated MDF board 18mm thick complete all as specified and directed and shown on drg.

Chair Dinning with cushion (Drg No TP)

Removable unserviceable broken Rear Leg and providing new legs made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and directed .

Removable unserviceable broken front leg and providing new legs made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and directed .

Removable unserviceable broken stiffner and providing new stiffners made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and directed .

Removable unserviceable broken back rest and providing back made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and directed .

Removing and supply and fixing of the unserviceable cushion of chair dinning long back with cushion and providing new cushion 50mm thick 32 density & covered with new tapestry cloth costing not less than Rs. 250/- per RM over the white kora cloth duly stiched to chair dinning long back with cushion as per drawing complete all as specified and directed. Make of foam :- Sleepwell/Corfom/Kurl-on

Stool dressing with cushion (Drg TP)

Supply and fixing of unserviceable cushion sheet 32 density x 50 mm thick duly covered with leatherite uphostering of quality and top shall be 12mm thick phenal bonded plywood complete all as specified and directed and shown on drawing. Make of foam :- Sleepwell/Corfom/Kurl-on .

Removable unserviceablebroken Leg and providing new leg made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and directed .

Removable unserviceable broken rail and providing new rail made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and directed .

Preparation wooden surfaces by rubbing with sandpaper and applying one coat of french polish complete all as specified and directed .

Trolley for TV (FD/E6/MAP/04)

Removing of unserviceable broken glass shutter from TV Trolley and providing/fixing new sliding door shutter(double leaf)made out of acrylic transparent sheet 5mm thick fixing with two way aluminium channel 1mm thick all round including two Nos runner wheels and one Nos chromium plated knob to each shutter complete all as specified and directed . All as shown in drg No FD/E6/MAP/04

Removing of unserviceable broken bottom from TV Trolley and providing new bottom made out of 18mm thick prelaminated MDF board exterior grade fixing with glue and metal screws to TV Trolley complete all as specified and directed and shown on drg No FD/E6/MAP/04.

All as per item 36.02 above but for Top of TV Trolley all as shown in drg No FD/E6/MAP/04.

All as per item 36.02 above but for side of TV Trolley all as shown in drg No FD/E6/MAP/04.

All as per item 36.02 above but for back of TV Trolley all as shown in drg No FD/E6/MAP/04..

Removing of unserviceable broken castors from TV Trolley and providing/fixing new castorsall as shown in drg No FD/E6/MAP/04.

Chair Writing (Drg No-FD-250,280)

Removing of unserviceable broken rear leg and providing/fixing new leg made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins & duly french polishing chair writing completely all as shown on drg All complete all as specified and directed

Removing of unserviceable broken front leg and providing/fixing new leg made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins & duly french polishing chair writing complete all as specified and directed

Removing of unserviceable broken back rest and providing/ fixing new back rest made out of 1st class hardwood teakwood duly French polishing chair writing complete all as specified and directed

Removing of unserviceable broken stiffener and providing/fixing new stiffener made out of 1st class hardwood teakwood duly french polishing chair writing completely all as shown on drg complete all as specified and directed

Removing of unserviceable broken front/rear rail and providing/fixing new front/rear rail made out of 1st class hardwood teakwood including drilling of Cane holes duly french polishing chair writing complete all as specified and directed

Removing of unserviceable broken side rail and providing/fixing new side rail made out of 1st class hardwood teakwood including drilling of Cane holes and duy french polishing chair writing complete all as specified and directed

Removing of unserviceable broken arms rest and providing/fixing new arm rest duly shaped & made out of 1st class hardwood teakwood and duly french polshing chair writing complete all as specified and directed

Chair dining (Drg No-FD-228,279)

Removing of unserviceable broken rear legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polishing chair dining complete all as specified and directed

Removing of unserviceable broken front legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polishing chair dining complete all as specified and directed

Removing of unserviceable broken back rest and Providing/ fixing new back rest and duly french polishing chair dining complete all as specified and directed

Removing of unserviceable broken stiffeners and providing/fixing new stiffner made out of 1st class hardwood teakwood and duly French polishing chair dining completely all as shown on drg and complete all as specified and directed

Removing of unserviceable broken front/rear rails and providing/fixing with new front/rear rails made out of 1st class hardwood teakwood including drilling of Cane holes and duly french polishing chair dining completely all as shown on drg complete all as specified and directed

Removing of unserviceable broken side rails and providing/fixing with new side rail made out of 1st class hardwood teakwood including drilling of Cane holes and duly french polishing chair dining complete all as specified and directed

Chair Easy (Drg No-FD-229)

Removing of unserviceable broken rear legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins and duly french polishing chair easy complete all as specified and directed

Removing of unserviceable broken front legs and providing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins and duly french polishing chair easy complete all as specified and directed

Removing of unserviceable broken arms rest and providing/fixing with new arm rest made out of 1st class hardwood teakwood duly shaped and duly french polishing chair easy complete all as specified and directed

Removing of unserviceable broken frame of seat back frame and providing/ fixing with new frame made made to shape out of 1st class hardwood as per drg including drilling of cane holes @ 12.5 mm c/c for chair easy duly French polishing chair easy complete all as specified and directed

Removing of unserviceable broken front/rear rails and providing/ fixing with new rail made out of 1st class hardwood including drilling of cane holes and duly french polishing chair easy complete all as specified and directed

Removing of unserviceable broken side rails and providing/fixing with new rail made out of 1st class hardwood including drilling of Cane holes for chair Easy & duly French polishing complete all as specified and directed

Bed with Plywood Top (Drg No-FD-246)

Removing of unserviceable plywood from head rest and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for head rest of bed plywood duly french polished all as shown on drg complete all as specified and directed

Removing of unserviceable plywood from foot rest and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for foot rest of bed plywood duly french polished all as shown on drg complete all as specified and directed

Removing of unserviceable broken long rail and providing/fixing new long rail made out of timber 1st class hard wood to bed plywood duly french polished all as shown on drg and complete all as specified and directed

Removing of unserviceable broken Short rail and providing/fixing new short rail made out of timber 1st class hard wood to bed plywood duly french polished all as shown on drg and complete all as specified and directed.

Removing of unserviceable broken plywood from bed and providing new plywood of commercial type 12mm thick 7 ply (MR Grade not less than Rs 100 per sqft) and conforming to IS 303 of 1989 to bed ply wood top and all as specified and shown on drg. Also brackets of specified shape & size to be provided at all four corners of the bed.

Table writing (Drg No-FD-33(M),275

Replacement of unserviceable top of Table writing and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-2005 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing of unservicable drawer from table writing & providind/fixing with new drawer with knob of good quality made out of prelaminated MDF board 18mm thick & including french polishing complete all as specified and directed and shown on drg.

Removing of unservicable leg frame from table writing & providing with new leg frame made out of 1st class hard wood teak & including french polishing complete all as specified and directed and shown on drawing

Table office clerk steel (Drg No-FD-84(M)/10)

Replacement of unserviceable top of Table office clerk steel and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-2005 and 4mm thick teak wood beading all round including tightening the frame complete all as specified and directed

S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Clerk Steel including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade complete all as specified and directed and shown on drgs.

S&F MS Lock (6 lever brass levers) with duplicate keys for drawers/cup-boardcomplete all as specified and directed

M & L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of shade as approved synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

S&F in repair to leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete all as specified, directed and shown on drgs.

S&F to Hard Rubber/PVC toe of superior quality as approved complete all as specified and directed

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed

Table office officers steel (Drg No-FD-84(M)/10)

Replacement of unserviceable top of Table office officers steel and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-2005 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Officers Steel including preparation of surface & applying two coats of synthetic enamel paint with spray gun in two shades over one coat of red oxide primer complete all as specified, directed and shown on drgs.

S&F MS Lock (6 lever brass levers) with duplicate keys for drawers/cup-board,complete all as specified, directed and shown on drgs.

M&L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of shade as approved synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

S&F Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete all as specified, directed and shown on drgs.

S&F Hard Rubber/PVC toe of superior quality as approved complete all as specified and directed

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer complete all as specified and directed

Table with/without Drawer Steel (900 x 600 x 760 mm) (Drg No-1007/1008)

Removal of existing worn out painting from in side & outside including preparation of surface frame and M&L for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer, rest complete all as specified and directed

S&F in repairs to top of Table with/without Drawer Steel with 18mm thick prelaminated MDF board one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg complete all as specified and directed

Table centre two tier (Drg No-FD-225/274) Replacement of unserviceable top of Table center two tier and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-2005 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Table Computer (Drg No-FD/E6/MAP/03) Replacement of unserviceable top of Table computer and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-2005 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing of unserviceable telescopic channel from key board of table computer and providing/fixing new telescopic channel (12"/16''/18'')as required of superior quality to key board of table compuer all as specified and shown of drg.

Removing of unserviceable lock from drawer of table computer and providing/fixingnew multipurpose brass lock of superior quality with duplicate brass keys to drawer of table computer all as specified and shown on drg.

M & L for spray painting with two coat syn enamel paint with spray gun in two shades after applying sand papering of steel surfaces on fwg items :

Almirah large steel with shelves & 1/2H 1/2S (Drg No DGS&D FD-67/1031/1033/1037): M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completelyly and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Almirah medium steel with shelves (Drg No DGS&D FD-243/1032): M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel with spray gun in two shades shade as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Locker steel (Drg No-FD-257/1029): M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Locker Steel Double Shutter with Independent Locking Device (Drg No-TP) :- M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Book shelf open large steel (Drg No-FD-69) : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Book shelf open small steel (Drg No-69) : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Book case steel (Drg No-FD-90/1028) : M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer complete all as specified and directed and shown on drgs.

Cabinet filling steel 4 drawer (Drg No TP, DGS&D GE (K) FD-35/86) :M&L for removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified and directedand shown on drgs.

Repair/Removing of unserviceable legs and providing new legs made out of 18 guage MS black sheet duly painted with two coat Synthetic enamel paint with spray gun in two shades over a coat of red oxide primer and welding to Almirah large steel with shelves & 1/2H 1/2S. (Drg No- DGS&D, FD-67/1031/1033)

Repair/Removing of unserviceable legs and providing new legs made out of 18 guage MS black sheet duly painted with two coat Synthetic enamel paint with spray gun in two shades over a coat of red oxide primer and welding to Almirah Medium steel with shelves complete all as specified and directed. (Drg No- FD- DGS&D, FD-243/1032

Repair/Removing of unserviceable legs and providing new legs made out of 18 guage MS black sheet duly painted with two coat Synthetic enamel paint with spray gun in two shades over a coat of red oxide primer and welding to Locker steel complete all as specified and directed .(Drg No- FD-54/257/1029/127 and DGS&D )

Removing unserviceable drawers and Providing new drawer made out of 20G thick MS sheets to table office offrs/clerk steel all as specified and given in drg (Drg No - DGS&D, FD-84, GE(K) FD-4/83)

Removing of unserviceable locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for almirah large/medium steel with shelves, 1/2H, 1/2S, Book case steel & Locker steel complete all as specified and directed (Drg No - FD-67/243/54/257/1031/1029)/ DGS&D, FD 1032/90/1028

Removing of unserviceable broken handles and providing new handle steel chromium plated for almirah large/medium steel with shelves, 1/2 H 1/2S & locker steel complete all as specified and directed. (Drg FD 54/257/1029/1031/1032/1033/90/1028/67/243/ DGS&D)

Removing of unserviceable hinges and providing new steel hinges and welding to door shutters of almirah large/medium steel with shelves, 1/2 H 1/2S & locker steel complete all as specified and directed. (Drg No- DGS&D, FD - 67, FD -243 FD-54/257/1029/1031/1032/1033/90/1028)

Repair/Removing of unsv shelves, of Almirah large/medium steel with shelves and making new shelves out of 20 guage black MS sheet duly painted with 2 coats synthetic enamel paint with spray gun in two shades over a coat of red oxide primer as required at site and providing with necessary cleats/bolts & nuts complete all as specified and directed. (Drg No DGS&D -FD-67/243/1031/1032)

Cot DT steel with plywood top (Drg No-GE (K) FD-41/86) : Removing of old unserviceable plywood from cot DT steel with plywood top and supply and fixing plywood of 12mm thick,7 ply, commercial type, (MR Grade not less than Rs 100 per sqft) and MS angle of size 25x25x5mm shall be fixed & welded as a middle span which should match with top to fix plywood without leaving gap and MS plate iron cleats 10 Nos of size 25x5x60mm made to shape and fixed to both type of rails (02 Nos each rails) by welding complete all as specified and directed. Note:- Angle (Middle spn) and flat (Cleats) iron should have proper holes to fix plywood on top with (30x5mm) size nuts and bolts with washer and all steel section shall be painted with two coats of synthetic enamel paint smoke Grey over a coat of steel primer. Make of Ply :- Green ply/Kitply/Century

Charpoy GI pipe with plywood top (Drg No-FD-220)

Removing unserviceable Ply top from GI charpoy, tightening complete charpoy ie loose checknuts,elbows,Long Rails and short Rails and supply and fixing ply wood of 12mm thick, 7 Ply ,commercial Type,(MR Grade not less than Rs 100 per sqft) ISI Marked of size 1980x900mm complete all as specified and directed Make of Ply :- Green ply/Kitply/Century

M&L Removing old unserviceable long rail from GI charpoy and supply and fixing new long rail of size 1884mm long made out of 32 mm bore medium grade GI Pipe duly threaded on both ends and fixing to charpoy complete all as specified and directed. Note ;- 1)The items includes threading both sides in new long rail and 2) Old unserviceable long rail obtained shall be reused in Item No 50.03. Make of GI pipe : Jindal/TATA/PRAKASH

M&L for removing old unserviceable short rail from GI charpoy and fixing new short rail of size 814mm long made out of long rails retrieved vide items No 50.02 herein duly threaded on both ends & fixing to charpoy complete all as specified and directed . Note ;- 1) The items includes threading both sides in new short rail & 2) Old unserviceable short rail obtained shall be reused in Item No 50.04

M&L for removing old unserviceable legs from GI Charpoy and fixing new legs of size 394 mm long made out of short Rails retrieved vide item No 50.03 herein before duly threaded on one end including 3mm thick MS sheet( made to shape of the bottom) in bottom and two Nos clamps as shown on Drg by welding complete all as specified and directed

M&L for removing old unserviceable three way elbow and supply and fixing new elbow 32 mm bore (ISI marked) to GI charpoy, complete all as specified and directed

M&L for removing old unserviceable check nuts and supply and fixing new check nuts 32 mm bore 6mm thick to GI Charpoy complete all as specified and directed

M&L for removing old unserviceable legs from GI charpoy and fixing new leg of size 394 mm duly threaded one end and including 3 mm thick MS Sheet ( made to shape at the bottom) in bottom two nos clamps ( as shown in drawing) by welding complete all as specified and directed

M & L for spray painting with two coat syn enamel paint with spray gun in two shades after applying sand papering of steel surfaces on following items :-

Rack Adj. 3 Tier Slotted Angle 7200 x 900 x 300 mm (Drg No-TP)

Rack Open Steel on Slotted Angle (Drg No-TP)

Rack Side Steel 660 x 300 x 680 mm (Drg No-TP)

Rack Side Steel 4 Space (Drg No-FD-97)

Rack Side Steel W/ 3 Shelves Seprate Computer Tray (Drg No-FD-97)

Rack side steel with tray (685 x 255 x 760mm) (Drg No- FD-97)

Rack Steel 2500 x 900 x 650 mm (Drg No- GE (K) FD-94/92

Rack steel 1830 x 760 x 1905 mm (Drg No - FD-129)

Rack Steel 1830 x 915 x 450 mm (Drg No- SK-513)

Rack steel Adj 710 x 900 x 375 mm (Drg No- TP)

Rack Steel Adj Shelving Angle Post Open Type 2209 x 914 x 457mm (Drg No- TP)

Rack Steel Adj. 1875 x 900 x 300 mm (Drg No - TP)

Rack Steel Adj. 6 Tier (Drg No- FD-106)

Rack Steel Adj. Angle Post Closed Type (Drg No-FD-106 (M))

Rack Steel Adjustable w/8 Shelves (Drg No- TP)

Rack Steel For Document 1905 x 915 x 400 mm (Drg No-FD-106)

Rack steel Open 915 x 710 x 305 mm (Drg No- FD-97)

Rack steel Storage With 4 Shelves Making 3 Compartment (Drg No-DGS&D)

Rack Steel With Slotted Angle but 5 Slots (Drg No-TP)

Rack Steel With Slotted Angle Open (Drg No-TP)

C S Sharma and Co