Installation of Water Purification Unit (R.O) At. Karanjkalla, Tq- Kallam, Dist- Dharashiv.

PART A RO UNIT Item No- 1:- Providing and errecting HDPE rotaatinal molulded raw water storage tank of 2000 ltr capacity Plasto/Sytex, Sarita

Item No- 2:- Raw water pump, 2.0 m3/hr Single Phase 1.5 HP Kriloskar, IPP

Item No- 3:- RWT & PWT Level Switch

Item No- 4:- RWP SUCTION AND DISCHARGE BALLL VALVE

Item No- 5:- RWP DISCHARGE PRESSURE Gauge BLACK

Item No- 6:- DMF , 13X54 FRP VESSEL Avenchura/HT/Pentane

Item No- 7:- MEIDA -SUPPORT BED + CARBON 12 X 48

Item No- 8:- ACF , 13 X54 FRP VESSEL

Item No- 9:- MEIDA -SUPPORT BED + CARBON 13 X 54

Item No- 10:- 25 NB MANUAL MPV AND INTERNALS FOR THE ABOVE VESSEL INITATIVE/UKL

Item No- 11:- ANTISCALANT DOSING PUMP 0-6 IPJ VERITO/I DOSE/ E-DOSE

Item No- 12:- PH BoosterDosing Pump , 0-6 IPH Verito?I-Dose/E-dose

Item No- 13:- 30LTR Dosing Tank (HDPE)

Item No- 14:- PH Boost Chemical

Item No- 15:- Antiscalant Chemical

Item No- 16:- CF 20" Cartidge sleem housing PP

Item No- 17:- CF 20" With PP spun Cartidge Darily/ Intact/ Gopani

Item No- 18:- High Prssure Pump, 1.5m3/hr Single Phase 2 HP IPP/CRI/ALGO/CNP

Item No- 19:- HPP Discharge Ball valve

Item No- 20:- Pressure Vessel Suitable For 1 Nos. 4" membrane , inSS304

Item No- 21:- 4" x 40" membrane Burton/Pentane/Toray

Item No- 22:- Low and High Prssure switch

Item No- 23:- Rej Fulshing Solenoid Valve

Item No- 24:- Rotameter, RO Permeate, Reject and Recirucaltion Astrol/Flux

Item No- 25:- Permeate Storage Tank 1000 ltr, SS 304

Item No- 26 :- 1000 LPH UV Alfa/Philips/Sukrut

Item No- 27 :- Skid 202 SS

Item No- 28:- Control Panel 1-1

Item No- 29:- HPP Disch & Raj. Pressure Gauge

Item No- 30:- UPVC and Fittings

Item No- 31:- Hardware , Accessories , Wiring, AND Cable Accessories

Item No- 32:- Installation ereection and commissioning job work

Item No- 33:- Water chiller Spilit type 2 ton

Item No- 34:- Water ATM Smart Card Base

Item No- 36 :- Water Sample Testing Chages before and R.O. Unit Installation etc Complete.

Item No- 37:- Third Party Inspection Charges for R.O. Unit etc.

PART B Item No- 38:- Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.

Item No- 39:- Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Item No- 40:- Supplying and erecting flat flexible 3 core 2.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Item No- 41:- Supplying and erecting high density polythene pipe ISI mark 32 mm dia. suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete.

Item No- 42:- Supplying and erecting B Class 40 mm. G.I. Bend position with nesessary Material

Item No- 43:- Supplying and erecting B Class 40 mm. G.I. Couplingn with nesessary Material

Item No- 44:- Supplying and erecting heavy duty G.I. Union 40 mm dia position with nesessary Material

Item No- 45:- Providing and erecting Rope 12 mm size Market Rate

Please Enable Macros to View BoQ information