REPAIR / REPLACEMENT OF TRAFFIC LTS AND SPECIAL REPAIR AND MOTORISED OP OF HANGER DOOR AT AOP AREA UNDER GE NASIK ROAD CAMP.

Amount

Supply & fix connector kit male suitable for runway copper cable 6 Sqmm to 16 Sqmm including breaking coupling for AMA AVN runway light fitting male type. Make -AMA or eqvt, complete all as specified and directed.

Supply & fix in repairs connector kit female suitable for runway copper cable 6 Sqmm to 16 Sqmm including breaking coupling for AMA AVN runway light fitting female type. Make -AMA or eqvt all as specified and directed.

Supply and fix in repairs straight through joint kit suitable for PVC XLPE HT under ground cable of size 6.0 to 16.0 Sqmm, 5 KV heat / cold shrink type for runway cables and taxi track cables complete all as specified and directed

Supply anf fix in repairs un-directional elevated type high intensity AMA APN runway Approach light fitting suitable for use with 200 Watt/6.6 Amps Halogen Lamp complete with all accessories including lamp and clear or green spreader lense, filters and CI base plate (Make-AMA) complete all as specified and directed.

Supply anf fix in repairs bi-directional elevated type high intensity AMA AUN runway edge light fitting suitable for use with 200 Watt/6.6 Amps Halogen Lamp complete with all accessories including lamp, lense, filters and CI base plate complete all as specified and directed.

Supply & fix in repairs medium intensity elevated type omni directional, AMA ALN LED Taxiway Edge Light Fitting suitable for Taxiway, Apron Edge Lights, Turning pad lifhts for operations at 6.6 Amps, series circuit supply, complete with omindirectional blue lens (glass), Lens clamping mechanims,breakable coupling, gasket, base plate with 6 Nos m - 10 stainless steel both and other acessories including white LED with an integrated encapsulated converter of power consumption approx 45W 6.6A, complete fitting confirming to latest ICAD requirment all as specified and directed. Make - Nasu systems/AMA/ GEC

Supply and fix in repairs Isolation transformer 200 watt, 6.6 Amps , 500 Volt Grade. Make AMA or equivalent approved make all as specified and directed.

Supply and fix in repairs 180 degree filter-Red/Green/Yellow Clear for AMA AUN Runway Fitting (Make-AMA) complete all as specified and directed.

Supply and fix in repairs Red Spreader Lens for APN Eng Fitting (Make-AMA) complete all as specified and directed.

Supply, Laying and testing XLPE cable insulated screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty 5000 volts grade with standard copper conductor of size 16 sqmm single core all as specified and directed.

Material and labour for high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 50 mm suitable for cable protection of size 50 sqmm complete all as specified and directed.

Excavation in trenches in soft / loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cable, RCC poles / stays and struts etc. and getting out including trimming sides and forming bottom surface complete all as specified and directed at site.

Returning & filling in, including spreading and leveling, watering and well ramming in layers n.exc. 25cm all as specified and directed by Engr-in-Charge.

Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exe 1.5mtr above the starting point all as specified and directed.

MAINTAINANCE & MODIFICATION OF EXISTING DOOR : DISMENTAL- EXISTING DOORS FROM ITS POSITION, COMPLETE OF LEAF SIZE 4 x 10 METER EACH, FRONT LEFT: 4 LEAFS AT A TIME AND FRONT RIGHT : 4 LEAFS SECOND TIME )- 2 SET, DISMENTAL BOTTOM WHEELS & TOP ROLLERS-2 SET, MAINTAINANCE/REPLACEMENT OF ROLLERS, FASTNERS, AXELS-16 NOS , REPLACEMENT & FIXING- ALL BEARINGS & CIRLIPS NUT BOLTS ETC & FULFILL THE REQUIREMENT - 32 NOS , MAINTAINANCE/REPLACEMENT OF WHEELS, MAINTAINANCE/REPLACEMENT OF ALL WHEELS, FASTNERS & AXELS-16 NOS, REPLACEMENT OF ALL BEARINGS OF WHEELS-32 NOS, CHANGE & MODIFY DRIVE WHEEL TO MOTORISE-2NO, DISMENTAL SHEETS ON DOOR LEAF, FABRICATE OR REPLACE THE DAMAGED STRUCTURAL MEMBERS, GRIND WELDING SOPTS, SCRAP CORROSION & RE-PAINT THE DOOR LEAF BY TWO COAT OF SAME COLOR PAINT OF ASIAN PAINT & RE-INSTALL THE SHEETS ON THE LEAF BY NEW SELF TAPPING SCREWS. MODIFY THE PULL PUSH CLITS ON LEAF RUBBERISE THE CLITS TO ABSORB IMPACTS. INSTALL BRUSHES TO CLEAN BOTTOM RAIL-8 LEAFS PER OPENING REQUIRE UPTO 400KG STEEL FOR MAINTAINANCE & MODIFICATION TO MOTORISE THE DOOR & MODIFY LEAF STRUCTURE AT DRIVE WHEEL, IF NECESSORY FOR DRIVE SYSTEM- 02 SET (8 LEAFS), CHECK TOP ROLLERS GUIDE RAIL & BOTTOM WHEEL RAIL - ALIGNMEN & PARALLELISM TO MAKE IT TRUE & SMOOTH OPERATION OF LEAVES -8 SET, ASSEMBLE & ALIGN EXISTING DOOR (8 LEAFS WITH CHANEL) AT IT'S POSITION -1 SET OR 8 LEAFS INCLIDING NECESSARY TRANSPORTATION AND T&P TO WORKSHOP & BACK

Continued item No. 15.00 NOTES: (1) ALL OTHER TECHNICAL ASPECTS IF REQUIRED DURING EXECUTION SHALL BE INCORPORATED IN JOB AS SPECIFIED AND DIRECTED BY ENGINEER-IN-CHARGE AT SITE (2) MAXIMUM 10 DAYS WILL BE ALLOWED TO COMPLETE HALF DOOR i.e 4 LEAFS AT A TIME AFTER DISMANTLING. (3) WORK WILL BE EXECUTED BY THE FOLLOWING OEM:- (A) SUNRISE CONSULTANTS & SUPPLIERS (B) ABHAY FABRICATION WORK. (C) MOGI ENGINEERING

Continued item No. 15.00 DRIVE SYSTEM/MOTORIZED OPERATION : ( PROVISION OF RAW MATERIAL/MANUFACTURING, SUPPLY, ERECTION & COMISSIONING ) : WORM GEARED MOTOR WITH CHAIN DRIVE-2 SET, ELECTRIC INDUCTION 3 PH, MOTOR- 5HP 1440RPM HEAVY INDUSTRIAL DUTY, CROMPTON MAKE.-02 NOS, WORM GEARBOX - 1:80 OIL LUBRICATED MOTOR FLANGE MOUNTED TO GEARBOX-02 NOS, CHAIN 1" WITH SPROCKETS DIA.100MM & 200MM-02 NOS, EXTENDED SHAFT ON WORM FOR HANDLE -R100MM HANDLE-R100MM FOR MANUAL OPERATION IN CASE OF ELECTRIC POWER FAILURE - 2 NOS. BRACKETS & FOUNDATIONS, METAL SHEET COVER. STEEL BASE FRAME-2 NOS

Continued item No. 15.00 SUPPLY, FIXING, TESTING AND COMMISSIONING OUTDOOR TYPE PANEL FULLY ENCLOSED WEATHER PROTECTED COMPLETE WITH ALL ELECTRICAL MATERIAL & CONDUCTORS (TENTATIVE) ALL AS SPECIFIED AND DIRECTED BY SDO OR ENGRINEER IN CHARGE OF SITE POLYCAB 2.5MM X 4C COPPER FLEXIBLE CABLE 100 RM POLYCAB 1.5MM X 3C COPPER FLEXIBLE CABLE 70RM POLYCAB 1.5MM X 1C COPPER FLEXIBLE CABLE 30RM 3TF34 CONTACTOR- SIEMENS-04 NOS OVERLOAD RELAY 3UA5000-1J OLR (6.3-10A) SIEMENS-02 NOS AUX. CONT. BLOCK NO 3TX4010 SIEMENS-04 NOS AUX. CONT. BLOCK NO 3TX4001 SIEMENS-04 NOS IDEAL CONTACTOR WITH BUZZER 220V OF DIFFERENT SOUND FOR FORWARD AND REVERSE MOTION -04 (FORWARD PLUS REVERSE) 3UX1418 MOUNTING KIT SIEMENS-02 NOSSIEMENS PUSH BUTTON 3SB5000-04NOS SIEMENS P/B 1NO. 3SB5400-0B-10NOS SIEMENS EMERGENCY P/B 3SB5000-0UC01-02 NOS SIEMENS 10A 4P MCB 5SL63107RC WITH ENCLOSURE IF REQURIRED -04 NOS

Continued item No. 15.00 IDEAL INDICATOR R/Y/B 220V-06 NOS PVC CABLE TRAY 25MM X 25MM -04 RM CW CTS10MM CONNECTOR-20 NOS CW END PLATE 6/10 UN-06 NOS END CLAM JUEC/101-10 NOS PG16MM PVC GLAND-04 NOS INSULATION TAPE R,Y,B,G- 08 NOS CU PIN LUG 2.5MM-200 NOS CU RING LUG 2.5MM ID6 7011-24 NOS CU PIN LUG 1.5MM MGP-9-200 NOS CABLE TIE 100MM PKT-02 NOS CABLE TAI 200MM PKT-02 NOS IDEAL LIMIT SWITCH ID8108-04 NOS PANEL CONTAINER OF SIZE 400MM X 400MM X 200MM OF 2MM THICKNESS -02 NOS CABLE CARRIER MEDIUM GRADE SURFACE STEEL CONDUIT STOVE ENAMELLED NOT LESS THAN 32MM INCLUDING ALL ACCESSORIES-50RM MCB CHANNEL-02 NOS SIEMENS 6A SP MCB 5SL61067RC-02 NOS MCB PANEL BOX 150 X 100 X 100-02 NOS CONDUIT PIPE & ACCESSORIES -12 RM EARTHING WIRE- 40RM CABLE TROLLIES-30 NOS WIRE ROPE DIA. 8MM WITH CLAMPS 40RM TENSION BOLT & BRACKETS-02 NOS

Continued item No. 15.00 EARTHING COMPLETE WITH COPPER EARTH PLATE ELECTRODE 60X60CM.X 6MM THICK, BURIED DIRECTLY IN GROUND (EARTH PIT NOT LESS THAN 2.25 METRES DEEP BELOW GROUND LEVEL) WITH TOP EDGE OF THE PLATE NOT LESS'THAN 1.5 METRES BELOW NORMAL GROUND LEVEL, CONNECTED TO COPPER STRIP 25X4MM AS EARTHING LEAD BY MEANS OF BOLTS, NUTS, CHECK NUTS AND WASHERS OF GALVANISED IRON OR STEEL ALL AS SHOWN IN ELECTRICAL PLATE NO. 3 CONNECTED TO EARTHING TEST POINT ALL AS SPECIFIED OR INDICATED INCLUDING TESTING ON COMPLETION-01 NO

Continued item No. 15.00 BEVEL GEARBOX ATTACHMENT TO MAIN GEARBOX FOR HANDLE : 1:4 RATIO.( APROX. TO COMPLETE OPEN 15M DOOR, IT WILL REQUIRE 3052 HANDLE ROTATIONS. BY THIS GERABOX, IT WILL REQUIRE 763 HANDLE ROTAIONS.) - 02 NOS PER OPENING

NOTE : - AMOUNT OF SCHEDULE OF CREDIT Rs. 14,850.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/S SANTOSH CONSTRUCTION CO

DURGAI ELECTRICALS

M/S GURBAX AND CO

SHRI SULAI ELECTRICALS

SHRI SWAPNAYOG ENTERPRISES

Bidder Name

SHRI SULAI ELECTRICALS

sapana enterprises

M/S SANTOSH CONSTRUCTION CO

SHRI SWAPNAYOG ENTERPRISES

M/S GURBAX AND CO

DURGAI ELECTRICALS