Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹34.5 L+₹1.5 L (4.56%)Rejected-Finance | L2 | Rejected-Finance Not Being lowest | |
| 3 | L3₹34.5 L+₹1.5 L (4.62%)Rejected-Finance | L3 | Rejected-Finance Not Being lowest | |
| 4 | L4₹34.9 L+₹2.0 L (5.96%)Rejected-Finance | L4 | Rejected-Finance Not Being lowest | |
| 5 | L5₹35.8 L+₹2.8 L (8.41%)Rejected-Finance | L5 | Rejected-Finance Not Being lowest |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
17 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandimandir
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-02/2022-2023 REPAIRS TO CERTAIN B/R WORKS ANDSUNKEN TREATEMENT IN TOILETS OF HQ WC AT CHANDIMANDIR
2022_MES_517919_1
GE/CHM-02/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹99,000
Yes
23 Jun 2022
12 Apr 2022
24 May 2022
12 Apr 2022
17 May 2022
10 May 2022
60 days
Amount
Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) complete all as specified & directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) complete all as specified & directed.
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Plain cement concrete 1:5:10, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.
Water proofing treatment to SUNKEN PORTION and adjoining walls of kitech. WC, Bath & Toilet etc. : 15 mm plaster in cement mortar (1:3) after roughning and cleaning the surface mixed with WP compound as per manufacturer's instructions shall be provided on sunken portion while the concrete is green :- (a) Apply cement slurry to the surface @ 0.488 kg / Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and the surface will be allowed to air cure for 4 hours. (b) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (c) Curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Paste one layer of 3mm thick APP membranne with bitumen by torch application to the treated sunken surface. (e) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound of make mentioned as specified in Appx 'B'. (f) Testing of all traps & Joints shall be done after sealing & before filling of sunken slab
Glazed ceramic coloured tiles of size 300mmx600mmx7mm thick, on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Non skid, first quality ceramic coloured tiles, 8 to 10 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.
Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the MOD land,complete as specified and directed.
Vitrified coloured double / ultra charge tiles 8-10mm thick (square / rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Taking up or down 15mm bore steel tubing with all standard fittings or connections, from wall/ceiling/floor etc, complete all as specified and directed.
Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
Granite slab, 16 to 18mm thick (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed steps, jambs, pillars, window-cills, cooking platforms and like and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 15mm thick in cement mortar 1:6 including cutting / rounding of edges where requried complete all as specified and directed.
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed
PVC (SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls or laid in trenches including nuts bolts etc, fixed as in repair complete all as specified and directed
PVC (SWR) bends suitable for 110 mm external dia fixed as in repair complete all as specified and directed.
PVC (SWR) bends suitable for 75 mm external dia fixed as in repair complete all as specified and directed.
PVC (SWR) floor trap 75mm dia with grating including jointing to waste pipe and setting in cement concrete type B-1 (1:2:4), fixed as in repair complete all as specified and directed.
Electronic sensor pillar tap for automatic wash hand basin, battery operated, including all battery arrangement fixed as in repair complete all as specified and directedMAKE : HINDWARE / CERA / PARRYWARE
Electronic sensor with machine including automatic urinal flush system, battery operated, including all battery arrangement fixed as in repair complete all as specified and directed MAKE : HINDWARE Cat part No 505964 or equivalent in CERA / PARRYWARE
Vitreous china, table top wash hand basin, pastel colour including waste coupling and waste pipe, fixed as in repair complete all as specified and directed. MAKE : HINDWARE Cat Part No 91036 (68 x42) Cornice or equivalent in CERA / PARRYWARE
Vitreous china, pedestal type one piece compoite closet type, pastel colour including seat cover , fixed as in repair complete all as specified and directed. MAKE : HINDWARE Cat Part No 92088(Element), Colour : Pastel or equivalent in CERA / PARRYWARE
Angular valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions, fixed as in repair complete all as specified & directed by Engineer-in-charge.
PVC connection 15mm dia with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed.
Factory made Powder coated aluminum frame/ shutters as in repair for doors, windows, partition wall etc including all necessary fittings such as handles, hinges, locking arrangements, tower bolts, neopreen beading etc complete all as specified and directed. NOTE : (Glazing/ wire mesh shall be measured and paid separately) MAKE of aluminium sections : HINDALCO/JINDAL/ NALCO
Supply only Tinted sheet glass 4.8mm thick ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Designer aluminium composite panel sheet (ACP), 4mm thick colour as approved by Engr In Charge all as specified and directed.
Solid PVC door frame having profile 125mm x 60mm , for doors with two rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal screws complete all as specified and directed.
Solid PVC door frame having profile 75mm x 50mm , for doors with two rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal screws complete all as specified and directed.
Butt hinges 100mm size, of extruded aluminum alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.
Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, complete all as specified.
Aluminum alloy, anodized, sliding door bolt 300mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed.
Aluminum handle 150mm long cast type anodized , complete all as specified
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment and removing the demolished material out side MOD land complete all as specified & directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.
PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) , as in padding over roof, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (water proofing compound to be measured and paid separately)
Rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces and finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
Supply only Integral waterproofing compound, ISI marked complete all as specified and directed.
Atactic polypropylene polymer (APP) 3mm thick based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying two coat of bituminous based aluminium paint @0.2 kg/sqm over exposed APP sheet with and including removal of existing bitumunius felt including wire brushing and cleaning top surfaces of concrete complete all as specified & directed.
Flush shutters 35mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.
Veneered decorative plywood, 12mm thick , grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed.
Toughened glass, 12 mm thick tempered, for decorative/crest, plain/frosted, cut to size, polished edge, homogenious colour fixed as in glass door shutter or glass partition including necessary holes, cutouts & shunk holes and necessary fittings, fixtures, brackets and accessories required like stainless steel hinges, floor door closer, latches, handle or knobs, stop plate etc including ruber beading and silicon clear for joints, fixed as in repair complete all as specified and directed by Engineer-in-charge. Note : Decoration/design or unit name, emblem, crest over glass shutter will be approved by Engr-in-charge before execution and the rates are inclusive of the same.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.
Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings including ridges complete all as specified & directed by Engineer-in-charge.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
pre-painted galvalume aluminum zinc coating (AZ 70) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
Rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe-290 Gde E-165 as grating over drain etc, complete all as specified & directed
False ceiling in repair with powder coated exposed Gl grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmx600mm. Grid of modular size 600mm x600 mm shall be supported by 4mm dia Gl wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fibre cement designer ceiling board (Density>1200 Kg/Cum) of size 595mmx 595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part-4, 5, 6,7 & 8 complete all as per manufacturer's instruction. (Make:- Everest or equivalent as approved by GE)
Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed.
Double action floor spring of size 300mm x 200mm hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed as in repair complete all as specified and directed.
Material and labour preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Door closer hydraulically regulated brass (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, fixed as in repairs, complete all as specified and directed.
KUNDRA CONSTRUCTIONS
M/s Om parkash
M/S Dhanpati Construction
Dhingra Brothers
M/S Gupta and Sons
RAJESH KUMAR
m/s AR Construction co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .