REPAIR/MAINT OF STREET LIGHT AND PERIMETER SECURITY LIGHTS, HIGH MAST LIGHTS AT DRONACHAL BHPOAL

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for laying of caste and getting out in Hard / dense soil disintegrated rock complete all as specified and directed.

Returning , filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft/disintergrated rock complete all as specified and directed.

Removing excavated material not exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed

M&L for clean, dry, unwashed sand filled in trenches for cushioning to cable complete all as specified. NOTE:- The depth of cushion after punning shall be measured.

Supply and lay standard size common burnt clay building bricks sub class 'B' for cable protection, laid dry complete all as specified and directed.

Taking down old/ unserviceable UG cable of any description of size upto 50 Sqmm 2/3.5/4 core complete all as directed. Note:- Excavation / Earth work , sand & Brick shall be measured and paid seprate under relavent items.ii) New Cable shall be used if required at site and paid separetly under respective items.

Relaying the serviceable cable taking out from item No 6 in same or other places after tracing out the fault with the help of megger and rectifying the defects. Note: (i) Straight through joint shall be measured and paid seprate under relevent item of schedule.

Supply and Laying in repair XLPE insulated armoured heavy duty electric under ground cable aluminum conductor 1100 volts grade in trenches/on pole through sleeves etc. of 10 Sqmm 4 Core complete all as specified and directed

Supply & fix heat shrinkable type straight through cable joint kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 10/16 Sqmm 2/4 core complete all as specified and directed.

Supply & fix heat shrinkable type straight through cable joint kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 25/35/50 Sqmm 3.5 core complete all as specified and directed. Note for item No 9 & 10 : (i)The suitable excavation shall done by the contractor for making the cable jointing kit and make the cable functional. (ii) Excavation, returning filling and removing shall be measured and paid seperately under the relevant items.

M& L for MS flat iron for fabricating of clamp of various size as required at site for mounting/fixing of brackets and junction box on pole complete all as specified and directed.

M&L for cutting of bituminous road/ floor for laying of pipe/cables n. exc 1.5m wide and n. exc 1.5m deep including refilling with material and watering Cement concrete work in pavement/hard-standing of flexural strength 40kg/per square centimetre in field using400 kg of cement per cubic metre,thickness of concrete 25 cm or less complete all as specified and directed.

Taking out short circuited / burnt out existing aluminium/copper wire and supply & replace weather proof PVC insulated multi stranded copper conductor1.5 Sqmm flat / round,three core 1100 volts grade complete all as specified and directed.

S&F in replacement of GI Pipe medium grade on road/pole/wall/floor for cable protection with fixing arrangement size 40mm dia complete all as specified and directed..

M&L for scratching out old bubbled paint, finishing the surface with one coat of aluminium primer & two coats of aluminium paint of 1st quality to street light steel tubuler poles of any height 7/9 mtr , any type (double swan, single swan) all as per site above embedded level, including pole number writting with white colour enamel paint on black colour circular base) with two coat of lime wash on pole coping all as directed by Engr-in-charge.

M&L for fabrication in repair of street light junction box of size 350 x240 x115 mm inner dimension made out of MS Sheet 2 mm thick with hinged doors, locking arrangements horizontal / vertical operated with 6 amps MCB SP, along with provision of 04 Nos aluminium bus bar of capacity 40 Amps and including 25mm x3mm MS flat iron clamps duly painted with two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed including dismantling of existing unserviceable box complete all as specified and directed. . Note : Ms clamp shall be measered and paid separetly under respective item

M & L for replacement of LED aviation light luminaries comprising of aluminium housing with polycarbonate enclosure complete Make : Bajaj / Philips/Havells complete after taking down the old unserviceable one all as directed.

Supply and fixing GI bracket 1.2 mtr long 40 MM dia complete with MS clamp bolts and nuts for fixing of bracket complete all as specified and directed.

Cutting and Trimming of tree branches touching LT over head lines and trimming of branches in each span of LT over head line complete all as directed Note: (a) The item shall be repeated after three months from the date of first trimming as directed by Engr-in-charge. (b) Measurement and payment will be made for each cutting/trimming as a job.

S&F in repair LT cable joiniting kit 1100Volts grade cable for indoor/outdoor joint heat shrink type complete with jointing material and accessories suitble for 4 core XLPE armoured aluminium conductor cable of size 10 to 70 sqmm

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed wire, one twin core cable flat 4 Sqmm complete

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed wire, one twin core cable flat 6 Sqmm complete

S&F in repair of Automatic Street Light Switch Three phase with Nature Switch-03 as the controlling unit for automatic switching of street lights based on LUX level of Natural light. The Sensor (Nature switch) along with suitable power contractor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust proof, Electric Shock proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) confirming to IP54. The contractor, MCB and circuit Wiring should suitable enough to take load 5 KW equally distributed over 3 phase (4 KW/Phase). The contractor rating 25 Amps (4-pole) and MCB(single pole) rating : 20-25 Amps(SP-03 Nos), complete all as specified and directed. Make. Nature Switch Model No SWADEEP-02EC 5 KW3P or equivalent makes in Legrand/L&T/GE.

S&F in repair of Automatic Street Light Switch Single phase with Nature Switch-01 as the controlling unit for automatic switching of street lights based on LUX level of Natural light. The Sensor (Nature switch) along with suitable power contractor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust proof, Electric Shock proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) confirming to IP54. The contractor, MCB and circuit Wiring should suitable enough to take load 5 KW . The contractor rating 25 Amps (single-pole) and MCB(single pole) rating : 20-25 Amps(SP-01 Nos), complete all as specified and directed. Make. Nature Switch Model No SWADEEP-02EC 5 KW1P or equivalent makes in Legrand/L&T/GE.

M&L for replacement of LED Street light fitting 1x 60 W energy saving and environmental friendly long life LED street light made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK 07 alongwith electrical connection and testing complete all as directed by Engr-in-charge

M&L for replacement of LED Street light fitting 1x 72W new generation energy saving and environmental friendly long life versalite pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seprate driver compartement with IP66 protection and impact resistance of IK 07 with 10 KV built-in surge protection device complete all as directed by Engr-in-charge

M&L for replacement of LED flood light fitting 1x 100 W energy saving and environmental friendly long life exclusive innovative die -cast aluminium IP66 flood lightsuitable for highlighting architectural facade and general purpose lighting complete fitting with existing flood light incl taking down complete

M&L for taking down High Mast light fittings mounting on cage from High mast pole of 12.5/16/20 mtrs height for repairing of LED/MH light fitting of any size/type and reinstalling the fitting/cage back to its position after carrying out repairs all as directed by EIC (Cost of LED spare parts will be measure seprately)

M&L for rewinding of existing burnt motor 2 HP of high mast light fitting with replacement winding wire and refixing the same alongwith proper alingment with steel rope etc including electrical connection and testing complete all as directed by Engr-in-charge.

Supply and replacement of Existing High mast panel front door openable with 3.0 mm thickness MS sheet of size 0.9x0.6x0.6m powder coating paint including locking arrangement , Panel internal wiring of suitable size wire alongwith 63 Amp MCCB as incomer and 03 Nos 40 Amps MCB as outgoing and mounting on 40x40x6 mm MS angle and grouted in PCC complete including one coat synthetic enamel paint complete all as per directed by Engr-in-charge

ROYAL CONSTRUCTION

PRAGATI ELECTRICALS AND ELECTRONICS

MODI CORPORATION

HRK ENGINEERING CORPORATION

M/S NAVIN & ASSOCIATES

M/S Shanti Enterprises

M/s VIKAS TRADERS