Construction of Science Lab, Art Craft Room and Library Room at Govt. Higher Secondary School Chenani, Zone Chenani, District Udhampur

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in All kinds of soils (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 4 : 8)1 cement 4 coasre sand 8 stone aggregate grade , with 40mm nominal size . crushed (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 3 : 6 ) cement 3 coasre sand 6 stone aggregate grade , with 20mm nominal size . crushed (including all carriages lead and lift if any)

Providing and laying in position reinforeced cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 1.5 : 3)1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed (including all carriages lead and lift if any)

Reinforced cement concrete work in wall (any thickness) including attached pilasters 'buttresses'plinth and string courses'fillet ,column pillar'piers ,abutment 'post and sturts etc upto floor five level excluding the cost of centering and shuttering ,finishing and reinforement ( 1 : 1.5 : 3 )1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed (including all carriages lead and lift if any)

Reinforcement of RCC work in plinth band incl straightening, cutting, bending , placing in position and binding incl.all carriages complete. (including all carriages lead and lift if any)

Brick work with common burnt clay F.P.S (Non-modular) brick of class designation 75 in foundation and plinth in 1:6 (1 cement : 6 coarse sand) (including all carriages lead and lift if any)

Extra for brick work in Super structure above plinth level upto floor V level (By manual means) (including all carriages lead and lift if any)

Centering and shittering including strutting propping etc and removal of form work Foundation footing bases of columns etc (including all carriages lead and lift if any)

Centering and shuttering incl. struting, proping ,etc.and removal of form work for; lintel beam ,plinth beam ,girders,bressumers and cantilevers (including all carriages lead and lift if any)

Centering and shuttering incl. struting, proping ,etc.and removal of form work for;columns ,pillars,piers, abutments,posts and struts (including all carriages lead and lift if any)

Centering and shuttering incl. struting, proping ,etc.and removal of form work for edges of slab under 20 cm (including all carriages lead and lift if any)

Centering and shuttering incl. struting, proping ,etc.and removal of form work for suspended floors,roofing ,landings,balconies and access platform (including all carriages lead and lift if any)

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement 6fine sand ) (including all carriages lead and lift if any)

12 mm cement plaster 0n wall of mix 1:6 ( 1 cement 6 fine sand ) (including all carriages lead and lift if any)

6mm thick plaster of mix 1:4 (including all carriages lead and lift if any)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and ixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash asteners shall be paid for separately): Sal wood (including all carriages lead and lift if any)

Providing and fixing paneled or glazed shutters for doors and windows and clestory windows using 10 kg /sqm (4mm thick) float glass panes including ISI marked black enameled M.S. butt hinges bright finished of requried size with necessary screws, ( 35mm thick of 2nd class deodar wood). (including all carriages lead and lift if any)

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : Second class deodar wood. (including all carriages lead and lift if any)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood (including all carriages lead and lift if any)

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick (including all carriages lead and lift if any)

Cement concrete flooring in (1:2:4) 1 cement : 2 coarse sand : 4 stone aggregate finishing with a floating coat of neat cement including cement slurry but exd. The cost of nosing of step etc. complete 50mm thick with 20 mm nominal size stone aggregates (crushed) (including all carriages lead and lift if any)

Providing fixing and glass strips in joints ot terrazo/cement concrete floor 40 mmwide x 4mm thick (including all carriages lead and lift if any)

Steel work welded in built up section, trusses and framed works including cutting , hoising, fixing in position and applying a priming coat of approved steel primer incl all carriages complete (including all carriages lead and lift if any)

Providing and fixing precoated galvanised iron profile sheet (size ,shape,and pitch of corrugation as approved by enginner in charge ) 0.50 mm (+0.05%) total coated yhickness with zinc coating 120 gm. per sqm as per IS 277 ,in 240 mpa steel grade ,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns min. to avoid scratches during transportation and should be supplied in single length upto 12 mt. or as desired by engineer -in-charge .The sheet shall be fixed using self drilling /self tapping screws od size (5.5x55mm) with EPDM seal,complete upto any pitch in horizontal/ verti cal or curved surface, excluding the cost of purlin ,rafter and trusess and including cutting to size and shape wherever reqd. (including all carriages lead and lift if any)

Applying priming coat with ready mixed pink or grey primer including acrylic putty of approved brand and manufactures on wood work (hard and soft wood) (including all carriages lead and lift if any)

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacturers in all shades (two or more coats) on new work (including all carriages lead and lift if any)

White washing with lime to give an even shade with two or more coats on new work (including all carriages lead and lift if any)

Finishing walls with water proofing cement paint of requried shade New work(one or more coat )applied @3.84 kg / 10sqm including cement primer coat completed (including all carriages lead and lift if any)

Making plinth protection 50mm thick with cement concrete ( 1 : 3 : 6) 1 cement : 3 Coarse sand: 6 stone aggregate) 20 mm nominal size f stone aggregate over 75 mm bed of dry brick ballast , 40 mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth. (including all carriages lead and lift if any)

Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. (including all carriages lead and lift if any)

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm (including all carriages lead and lift if any)

Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 X 10 MM (including all carriages lead and lift if any)

Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 200 X 10 MM (including all carriages lead and lift if any)

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 mm (including all carriages lead and lift if any)

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 125 mm (including all carriages lead and lift if any)

Providing and fixing Ms grill of reqd. patter in frame of window etc with M S flat ,square or round bars ,railing etc all complete fixed to opening/window frame with raw plugs,screw etc including primer and paint (including all carriages lead and lift if any)

Providing & laying vitreified floor tiles in different size ( thichness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades laid on 20 mm thick cement mortar 1:4 ( 1cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. ( size of tile 60 x 60 cm) (including all carriages lead and lift if any)

Providing and fixing Ceramic Floor tiles 300x300 mm non skidtile (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. (including all carriages lead and lift if any)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter volts nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 cement concrete (including all carriages lead and lift if any)

Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer - incharge. (including all carriages lead and lift if any)

Demolishing cement concrete manually/ mechanical means including of material and disposal complete 1:3:6 or richer mix (including all carriages lead and lift if any)

SHRI MUTAHIR AHMED MIR

M/s Mohd Firdoos Rather

ASHOK KUMAR

M/S ABDUL KARIM WANI

M/s Mohd Azam Wani and Sons

MOHD RAFI SALARIA