Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹29.0 LAccepted-AOC | ₹29.0 L | 1 | Accepted-AOC Found Regular |
| 2 | 2₹29.9 L+₹83,723.07 (2.89%)Rejected-Finance | ₹29.9 L+₹83,723.07 (2.89%) | 2 | Rejected-Finance Higher Bid |
| 3 | 3₹30.4 L+₹1.4 L (4.87%)Rejected-Finance | ₹30.4 L+₹1.4 L (4.87%) | 3 | Rejected-Finance Higher Bid |
| 4 | 4₹36.6 L+₹7.6 L (26.3%)Rejected-Finance | ₹36.6 L+₹7.6 L (26.3%) | 4 | Rejected-Finance Higher Bid |
Tender Value
₹40.7 L
EMD Value
₹81,500
Closing Date
22 Dec 2023, 2:00 pmClosed
Managing Director ASIDC Ltd
MRD ROAD BAMUNIMAIDAN
Improvement of existing road drain and boundary wall of Food Processing Park, Chaygaon, Kamrup (R), (Phase-I) Part II under ASIDC Ltd. for the year 2023-24
2023_ICD_34678_1
SIDC/NIT/FPP/7364
Open Tender
Civil Works
Works
60 days
Food Processing park Chaygaon
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
₹81,500
Yes
4 May 2024
13 Dec 2023
22 Dec 2023
13 Dec 2023
22 Dec 2023
13 Dec 2023
Amount
MAIN INTERNAL ROAD
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of Soil
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforce- All work up to plinth level 1 : 1. 5 :3 (1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources)
STEEL REINFORCEMENT Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo- Mechanically Treated bars of grade Fe-500D or more
Scarifying metalled (Water-bound) road surface including disposal of rubbish, lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity.
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer-in charge, including compacting each layer by rolling/ramming and watering, all complete as per drawing and direction of Engineer-in-charge.
DRAIN Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge. All kinds of Soil
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
CEMENT PLASTER WITH FLOATING COAT OF NEAT CEMENT 12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand)
MAYUR TALUKDAR
Paresh Kalita
FARUK RAHMAN SAIKIA
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .