Replacement of mounting Venetian Blinds, Polishing of conference hall, court room and DCs Chamber and attending Misc. works at Office of the Deputy Commissioner (NM)Andaman Mayabunder

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red i) Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder:

C.P. brass

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

20 mm nominal dia Pipes

25 mm nominal dia Pipes

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length i) 15 mm nominal bore

Polishing in PU matt finish polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1) The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2) Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hours. 3) On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade PU fillers to fill all the small and big holes. grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done and this surface is further allowed to try for 12 hrs. 4) On this, 1st coat of PU matt polish is applied with spray gun using melamine clear polish and PU thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final PU matt polish is applied with compressor pressure spray gun using PU matt polish and PU thinner mixed in required proportion complete as per direction of Engineer-in-Charge (Final coat to be done in 1 or 2 layers without gap of time)

Providing and mounting Venetian Blinds for windows: Cord mechanism to tilt and raise aluminum slats with a child safe chain of Nickel plated brass control with wand including face fix brackets, shallow frame and adjustable face fix brackets. Arrangement of slats alignment mechanism in the slat traveler. Blinds material will be polyester/fabric. Thickness of blinds material will be 0.65 mm. Traditional finishing with weights and chains.

Supplying and Providing Rubber wood Oval Shaped 06 seater conference table made of inculding finish with Pu spray polish etc.complete as directed by Engineer -in-charge.

Supplying of Revolving chair having specifications Overall width (+/-10 mm) 590 mm,Bracket height +- mm 410 mm,seat width +_ 10 mm 500mm ,seat depth =-10 mm 390 mm for conference table having pivot mechanism,tilt limitter with pressed and moulded with PU foam seat material and seat upholstered with foam laminated mesh fabrics etc. complete as directed by EIC.

Providing & fixing 8 mm thick clear float glass panes (minimum weight not less than 20.00 kg per sqm) of required size on the wall with nesessary SS fittings including grinding ,polishing,& smoothing the cut edges all complete as per direction of Engineer-in-charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.

15mm nominal bore (Jaguar or equivalent).

Providing and fixing of C.P. health faucet of approved quality.

15 mm nominal bore (Jaguar or equivalent).

Providing fixing glass shelf of size 450 x 150mm

Providing and fixing C.P. brass towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangements of approved quality.

600mm long towel rail. (Jaguar or equivalent)

NEHA BUILDERS AND ROADWAYS