Construction of 2156 MTs cap. godowns with 0.6 mm thick galvalume sheet roofing, roads including E.I works at SWH, Samalkha (District Panipat).

Amount

Earth work non plastic or tibba sand under floors taken form outside of campus area with all lead and lift including loading, unloading, laid in 15 cm layer including ramming, watering, consolidating compaction and compensation of earth etc. complete in all respect as per the direction or engineer in charge. This includes construction of embankment and subgrade for road & parking area compacted to meet requirement of table 300-2 of MORTH specification clause No. 305. The finished road surface will be as per X-section approved by Engineer-in-charge with respect to GTS. Further it shall be ensured that atleast 300 mm of subgrade shall be constructed at each location. Wherever any cutting of existing subgrade is required on this account excavation as well as handling and disposal of earthwork to accommodate minimum 300mm thick subgrade shall be carried out by the agency at his own cost. Nothing extra will be paid on this account

WBM 3” thick compacted using 53 to 22.4mm stone metal laid in one layer complete in all respects as per PWD specification.

WBM 6” thick compacted using 63 to 45mm and 53 to 22.4mm stone metal laid in two layer complete in all respects as per PWD specification.

Providing and fixing marble stone strips 13to 17mm x50mm in flooring as per DNIT.

Providing and fixing kotah stone strips 20 to 25mmx50 mm in flooring as per DSR-2018

Supply & fixing welded mesh/monkey gates as per drawing and design of the Corporation complete as per DNIT.

Providing and fixing finishing of surface using mechanical floater/ dic complete as per DNIT

P/L Dewatering system of C.C by vacuum vibrator surface trowel fix in complete complete as per DNIT.

P/F galvalume/Zincalume steel sheet verandah roofing 0.60mm thick (Total thickness) (only ±0.02 mm tolerance allowed) with tensile strength 550mpa, with coating mass @ 150gm/Sqm, of approved blue colour (RAL-5012) fixed self screw-sloping roof without curvature of TATA BlueScope , JSW Steel Ltd, Dongbu Steel Co. ltd(Korea) & Bhushan power and steel Ltd with coating of 55% aluminium, 43.5% Zinc and 1.5% silicon as per IS code- 15961, 15965 and all other relevant Indian codes as per specification, drawing and design of the Corporation.

Boring 10" dia bore with machine 250' deep bore including cost of diesel, labour & rent of machine cartage etc, complete in all respects

Supplying of 9" dia PVC pipes ISI brand 6 kg/square cm, 53 kg weight /20',250' pipe used including vat and cartage etc complete as per DNIT

Supply of end cap 9" dia ISI make complete as per DNIT

Preparing of cavity 40'-0" deep including rent of generator set. Motor 10 HP, cost of diesel & labour etc.

Cost of solution & copper rivet as per DNIT.

Supply of tee 9" dia ISI make complete as per DNIT.

Supply of elbow 9" dia ISI make complete as per DNIT.

Preparation of filter including cost of filter Jali and soot dhage etc. complete as per HSR.

Cost of HCI grating 12"x12" complete as per DNIT.

Supply of PVC reducer ISI make 9"x5" complete as per DNIT.

P/F NO smoking Board 2'*1' ON ACP sheet with vinyl pasting on it Fixed with Rawl plugs at site.

Godown Nos Board size 4' * 2' made up of 3mm ACP sheet with Vinyl printing

Speed breaker size 500*375*53mm conc. Filling and Epoxy with 6 pins for fixing in concrete.

Flex Board with 1" sq pipe flex digital printing on 13 oz material size 72' * 3' wall mounted

Supply and Fixing of Street Light 70 watt Crompton Make. (Havells/Crompton/Philips) complete as per DNIT

P/F of LED Bulb 15W complete as per DNIT (Havells and Philips, Syska)

S/E of ceiling fan 48” double ball bearing make (Havells,Fusion,Model/Areole new complete as per DNIT

3- Pin Top-15 Amp (Anchor/SSK Make) complete as per DNIT

Bidder Name

Amount

Naresh Jain

AGGARWAL CONSTRUCTIONS

Naresh Jain

Naresh Jain