Construction of Postmortem House at Hussainabad, Daltonganj, Dist Palamu.

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item –A) and disposal of excavated earth as obtained to a distance up to 50 M. Trenches , removing roots of trees , shrubs all complete as per approved design, Building specification and direction of E/I.

Earth work in filling in foundation trenches and plinth in layers not exceeding 150mm. Thick well watered, rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 Mtr . and lift of 1.5 Mtr. All complete as per building specification and direction of E/I.

Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing coarse clean sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm. Thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Providing designation 75 A One brick flat soling joints filled with local sand including cost ofWatering, taxes, royalty, all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level: 1:3:6(1 cement: 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level: 1:2:4(1 cement: 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing designation 75B Brick work in C.M.(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening carriage of materials, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level: 1:1.5:3(1 cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing designation 75B Brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening, carriage of materials, scaffolding, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I.

Reinforced cement concrete work in a wall , including attached plaster , column , piller, pier, abutments , post and structs etc above plinth level up to floor five level excluding cost of centring, shuttering, finishing and reinforcement with 1:1.5:3(1 cement:1.5 coarse sand:3 stone ahhregate 20mm size).

Reinforced cement concrete work in a beam, suspended floors, roof , balconies, chhajas, lintel and lintel band excluding cost of centring, shuttering, finishing and reinforcement with 1:1.5:3(1 cement:1.5 coarse sand:3 stone ahhregate 20mm size).

Providing Tor Steel Reinforcement…...do...do…...E/I

8 mm dia

10 mm dia

12, 16, 20/25 mm dia

Providing and fixing fan hook of 16mm. dia M.S. bar, 1 meter long bent to required size and shape, placed in position and fixed in the R.C.C. slab/Beam at the time of casting all complete as per building specification and direction of E/I.

Supplying, fitting and fixing M.S. grill made of 20mm x 6mm M.S. flat asper approved desing and drawing, properly fabricated with joints continuous fillet, welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile B Fixing with adjustable lugs with split end tail to each jamb

Supplying, fitting and fixing 35mm thick solid core type Non decorative single leaf flush door and window shutters with block board core blended with high quality phenol formal dehydes synthetic resin of standard make with Aluminum fitting such as hinges, tower bolts, handles, cleats and sand blocks taxes all complete as per building specification and direction of E/I.

suppplying fitting and fixing collapsible gate of approved size and make prperly fabricated with vertical double channel 20x10x2 mm at 100mm. Centres and braced with M.S flat diagonal 20x3 mm with top and bottom rail of T. iron 40x40x6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stopper, handles including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction E/I.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm)

Providing 6mm. cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm. cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth…....do….....do….........E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thououghly, scaffolding and taxes all complete as per building specifications and direction of E/I

Providing and laying rectified glazed ceramic floor tiles 300x300m or more (thickness to be specified by manufacture) of 1st quality conforming to IS:15622 with approved make in colours white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments, etc all complete.

Providing and laying vitrified floor tiles 600x600mm or more (thickness to be specified by manufacture) of 1st quality conforming to IS:15622 with approved make in colours white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments, etc all complete.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l. a With "A" grade white 15 x 15 cm tiles.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.

Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges

providing two coats of dry distemper of approved shade and make over a primer coat of washing over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper ,applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction E/I.

Providing structural steel work for Main Gate…..do…...do…...E/I.

Providing two coats of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surfaces thoroghly, scaffolding and taxes all complete as per building specifications and direction of E/I.

Providing and laying factory made chamffered edge cement concrete Paver block of 60mm thick …......do…......do…... with complete job.

Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes concealed work

15 mm nominal

20 mm nominal

25 mm nominal

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,external pipes, 25 mm nominal outer dia Pipes

Making holes in walls for laying G.I. pipes and restoring the same after pipe laying with complete job.

a) 125mm thick

b) 250mm thick

Providing and fixing gate valve of approved quality with complete job, 25 mm dia

Supplying Polythene water storage tank of ISI mark (e.g. sintex / Sinter / Himgiri / Gangotri etc.) with cover and locking system.

Providing and fixing male ended 15mm dia brass bib cock with complete job

Providing and fixing 15 mm size C.P. brass pillar cock C.I. body brass spindle pillar cock with complete job(C.I. Body brass spindle)

Providing & Fixing Stainless steel Kitchen sink with complete job. 610x510 mm bowl depth 200 mm

Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other with complete job

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require:

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other with complete job , with 12.50 liter low level PVC Cistern

Providing, fitting and fixing 40mm high vitreous white glazed earthen EWC with p trap of Parry Hindustan or any other approved with seat and lid, 12.5 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 12.5 ltr low level PVC cistern

SFF flat back or angular lipped front vitreous white glazed earthen ware urinal of Hindustan Parrry or any other approved with all complete job.

Supplying fitting and fixing the following items complete with all with complete job

a) Mirror of 6mm thick plate glass 600x450mm size

b).Soap Dish

c).Towel rail

S/F/F PVC S.W.R pipe (Supreme) - 110mm

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

a).Door tee- 110mm

b) Dlain bend - 110mm

c)Single tee without door - 110mm

Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including supplying all materials, tools,driling rig, air compressure and equipmentsas well as fule, lubricants and cost of transportation of rig machine and other vehical up to Site.

(a) From 0.00 M to 50.00 M below G.L.

(b) From 51.0 M to125.00 M

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp

Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP

Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I.

D.O.L. starter with S S Enclosure with 380/415 Volt colt 5 to 10 H.P.

Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit with modular type, Group A

Wiring for light/power plug with 2x4sq.mm FR PVC insulated copper conductor single core cable

Wiring for circuit/submain wiring alongwith earth wire -do-

2x1.5 sq.mm + 1x1.5 sq.mm earth wire

2x2.5 sq.mm + 1x2.5 sq.mm earth wire

2x4 sq.mm + 1x4 sq.mm earth wire

Supplying and fixing following modular type switch/ socket on the existing switch box/cover

5/6 amps, one way switch

15/16 amps, 6 pin socket outlet

S/F batten holder Supplying and fixing batten holder including connection etc. as required.

S/F ceiling rose

Supplying and fixing 2 pin, 5 amps ceiling rose on existing junction box/ wooden block including connection etc. as required.

ITC Ceiling Fan :- Installation, testing and commissioning of ceiling fan including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq.mm FRPVC insulated copper conductor single core cable etc. as required

S/F Modular type stepped tube electronic fan regulator on the existing plate switch box including connection but excluding modular plate etc as required

S/F S.P. MCB DB

S/F following way single pole neutral, sheet, MCB distribution board, 240 volts on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)

8 way, single door

Copper earth plate electrode

Earthing with copper earth plate 600mm x 600mm x 3mm thick Including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required (but without charcoal or coke and salt)

Salt/ charcoal for plate earth electrode -

Extra for using salt and charcoal for GI or copper plate earth electrode as required.

S/F 15/16 watt LED Bulb

20/22 watt LED Tube Light

Supplying of XLPE alluminium armoured cable with all complete job. 16sqmm, 4 core

Supply of 48" (1200 mm) Ceiling Fan Bajaj/Crompton or any other approved make etc without regulator

Supply of 12" (300 mm) Metal exhaust Fan Bajaj/Crompton or any other approved make etc

50/60 W LED Flood light

Carriage of Materials from nearest approved sources to work site including loading, unloading all complete job.

(i) Sand Lead - 10 Km

(ii) Stone Chips Lead - 22 Km

(iii) Bricks Lead - 8 Km

(iv)Local Sand lead = 3km

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

Please Enable Macros to View BoQ information