REPAIR REPLACEMENT OF PERIMETER SECURITY LIGHTS STREET GARDEN GATE LIGHTS SOLAR STREET LIGHTS AND REPLACEMENT OF STREET LIGHT CABLES JUCTION BOXES TIMER PANELCONTACTOR ALLIED WORKS FOR POCKET B AT JASAI MIL STN STN UNDER GE A BARMER

Amount

Dismantling of depriciated cross arms (Clamp, nut bolts )/ channels/ supports etc care fully from site and setting aside for reuse or for taking credit all as specified and directed.

Material and labour for steel structure, cross arms, bracing supports ,clamps, back plates febricated from structrual steel sections incl. nuts, bolts, washers, welding ,bending cold or hot drilling holes for bolts in any size and shape all as directed Including one primer coat, one under coat and one finishing coat of synthetic enamel steel paints incl preparation of surface all as directed.

Restringing/Tightening only of ACSR conductor of any type and size of street / security light feeder including straightening properly on insulators and binding with aluminum taps /binding wire /conductor jumper etc complete of any size all as directed. Note : - Single conductor shall be measured for length re-stringing.

Dismantling of ACSR conductor of any type and size from existing PCC/Steel poles at various locations all as directed by Engr - in - charge at site.

Material and labour in replacement of ACSR conductor straightening properly on insulators and binding with aluminum taps /binding wire /conductor jumper etc complete all as directed by Engr- In- Charge.

Supply and fix pin type porcelain insulator, vitreous brown insulator including one galvanised mild steel spindle with two GI washer and one GI Nuts 100 mm height 65 mm dia for 1100 volts grade incl taking down old unsv insulator from PCC/Steel pole complete all as specified and directed by Engr-in-Charge. .

Supply and fix shackle type porcelain vitreous Brown insulator 1100 volt grade 75 mm in height and 90 mm dia including galvanised mild steel strap of size 31mm x 3mm , 12 mm dia insulators bolts, washers and nuts complete all as specified.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m depth for taking out, laying of cables etc and getting out in soft/loose soil incl connected items complete all as specified and directed by Engr-in-Charge.

Excavation in trenches n.exc 1.5 m wide and exc 1.5m and n.exc 3m in depth for taking out, laying of cables etc and getting out in Soft/loose soil incl connected items complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth (soil) all as specified and directed by Engr-in-Charge.

Removing excavated material (soil) to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed by Engr-in-Charge.

Supply and spreading Tibba Sand including watering and consolidation in trenches for cushioning/cable protection all as specified and directed by Engr-in-Charge. Note : Punned thickness shall be measured and paid

Supply and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables in trenches for cable protection of U/G cables with width equal to length of bricks complete all as specified and directed

M&L for PCC (1:2:4) type B1, using (20mm graded stone aggregate) for coping of poles including necessary form work etc complete all as specified and directed by Engr-in-Charge.

M&L for providing PCC 1:3:6 type C2, Using 40mm graded aggregate for Cement concrete in foundations, filling and mass concrete including necessary form work etc complete all as specified and directed.

Taking out old unserviceable, burnt, punctured aluminium conductor cable LT, PVC/XLPE, 1100 volts grade, of cross sectional area upto 16 Sqmm all as specified and directed by Engr-in-Charge.

Supplying, Laying, Commissioning & testing of LT underground cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 4 core 16 Sqmm, including cable lugs, clamping of cable whereas the cable passes along the wall/poles, connection/termination complete all as specified and directed by Engr-in-Charge. Make : Havells/Finolex/Gloster/polycab/KEI

Supplying, Laying, Commissioning & testing of LT underground cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 2 core 10 Sqmm, including cable lugs, clamping of cable whereas the cable passes along the wall/poles, connection/termination complete all as specified and directed by Engr-in-Charge. Make : Havells/Finolex/Gloster/polycab/KEI

Supplying, Laying, Commissioning & testing of LT underground cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 4 core 10 Sqmm, including cable lugs, clamping of cable whereas the cable passes along the wall/ poles, connection/termination complete all as specified and directed by Engr-in-Charge. Make : Havells/Finolex/Gloster/polycab/KEI

S&F in replacement 2 core 10.00 Sqmm weather proof, PVC insulated and PVC sheathed multi stranded aluminium conductor cable, flat type 1100 volts as in service connection etc complete all as specified and directed.

S&F in replacement 2 core 6.00 Sqmm weather proof, PVC insulated and PVC sheathed multi stranded aluminium conductor cable, flat type 1100 volts as in service connection etc complete all as specified and directed. Note for item No 17 to 21 :- Wherever the cables are to be laid/fixed on poles/walls/other surfaces the cost of clamping using appropriate size/type of MS clamps,nuts both etc is deemed to be included in the unit quoted rates.

M&L for cutting the existing hard standing/PCC/WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing cement concrete (1:2:4) type B2 (using 40mm grade stone aggregate) upto 20 cm depth, finishing to a uniform smooth surface to match the existing surface complete all as specified and directed. Note : GI pipes shall be measured and paid separately.

Supply and laying Galvanized Iron pipe Medium Grade of dia 40mm for cable protection in trenches/ducts/floors or fixed on walls / roof / poles etc including suitable fixing accessories complete all as specified and directed by Engr-in-Charge. Make : Tata/Jindal/Prakash. Note :- Wherever the protection pipes are to be laid/fixed on poles/walls/other surface the cost of clamping using appropriate size/type of MS clamps,nuts both etc is deemed to be included in the unit quoted rates.

Supply and laying High density Polyethelene pipe (HDPE) of dia 40mm for cable protection in trenches/ducts/floors or fixed on walls / roof etc including suitable fixing accessories complete all as specified and directed by Engr-in-Charge. Note :- Wherever the protection pipes are to be laid/fixed on poles/walls/other surface the cost of clamping using appropriate size/type of MS clamps,nuts both etc is deemed to be included in the unit quoted rates.

S&F LED 9W with base B22 WW/WH 3000K/6500K suitable for Gate light/Garden light fittings incl dismantling U/S lamp complete all as specified and directed by Engr-in-Charge

S&F Digital Timer switch unit operated on AC 110 - 240 V 24 hrs clock, day/week programmable time for controling street lights of including taking down old u/s timer swiches complete all as specified and directed by Engr-in-Charge.

S&F Astronomical Timer switch unit operated on AC 110 - 240 V 24 hrs clock, day/week based on latitude and longitude for controling street lights of including taking down old u/s timer swiches complete all as specified and directed by Engr-in-Charge.

S&F MNX 40 Power contactor of 40 Amps, AC 415 volts, 4P for controling street lights of including making connections and taking down old u/s contactor complete all as specified and directed by Engr-in-Charge.

S&F MNX 25 Power contactor of 25 Amps, AC 230 volts, 2P for controling street lights including making connections and taking down old u/s contactor complete all as specified and directed by Engr-in-Charge.

S&F loop in- loop out fuse junction box of internal dimension 200x140x95mm made out of FRP sheet and locking screw fitted with and incl 6 Amps SP MCB - 1 No , 20 Amps rated 4 Way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular/Rail poles including necessary aluminium clamps, suitable glands, lugs,GI nut and bolts including taking down old u/s junction box complete all as specified and directed by Engr-in-Charge. Make : Sintex Cat No GSJB-2014 or techno-commercially equivalant in Hensel/OBO.

Supply,fix and test, in replacement of LED Street light fitting of capacity 90 Watts, CRI >70, Power factor > 0.95, colour temperature 5700K, luminous Efficacy not less than 100 lumen/watt, 9000 Lumens output, IP-66 protection, Impact Resistance of IK-07 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection,phase to phase protection, over voltage protection,surge voltage protection etc) unit suitable for working voltage 140-270 V AC, 50 Hz, pressure die cost aluminium housing and finishing eopxy powder coated grey colour after phospho chromate treatment with all accessories and connecting up complete including taking down old unsv one and all as specified and directed by Engr-in-Charge.

Supply,fix and test, in replacement of LED Street light fitting of capacity 60 Watts, CRI >70, Power factor > 0.95, colour temperature 5700K, luminous Efficacy not less than 100 lumen/watt, 6000 Lumens output, IP-66 protection, Impact Resistance of IK-07 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection,phase to phase protection, over voltage protection,surge voltage protection etc) unit suitable for working voltage 140-270 V AC, 50 Hz, pressure die cost aluminium housing and finishing eopxy powder coated grey colour after phospho chromate treatment with all accessories and connecting up complete including taking down old unsv one and all as specified and directed by Engr-in-Charge.

Supply,fix and test, in replacement of LED Street light fitting of capacity 70 Watts, CRI >70, Power factor > 0.95, colour temperature 5700K, luminous Efficacy not less than 100 lumen/watt, 7000 Lumens output, IP-66 protection, Impact Resistance of IK-07 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection,phase to phase protection, over voltage protection,surge voltage protection etc) unit suitable for working voltage 140-270 V AC, 50 Hz, pressure die cost aluminium housing and finishing eopxy powder coated grey colour after phospho chromate treatment with all accessories and connecting up complete including taking down old unsv one and all as specified and directed by Engr-in-Charge.

Supply, fix and test,in replacement of LED Flood light fittings for Midmast/Highmast Pole, of capacity 150 Watts, CRI>70, Power factor 0.95 colour tempracture 5700K, luminous Efficacy not less than 100 lumens/watt, colour temperature 5700K, 15000 lumens output, IP-66 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection,phase to phase protection, over voltage protection,surge voltage protection etc) unit suitable for working voltage 140-270V AC, 50 Hz pressure die cost aluminium housing and finishing eopxy powder coated with all accessories as per manufaurer instructions and connecting up complete including taking down old unsv one and all as specified and directed by Engr-in-Charge.

Supply, fix and test LED Flood light fittings for Midmast/Highmast Pole, of capacity 120 Watts, CRI>70, Power factor 0.95 colour tempracture 5700K, luminous Efficacy not less than 100 lumens/watt, colour temperature 5700K, 12000 lumens output, IP-66 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection,phase to phase protection, over voltage protection,surge voltage protection etc) unit suitable for working voltage 140-270V AC, 50 Hz pressure die cost aluminium housing and finishing eopxy powder coated with all accessories as per manufaurer instructions and connecting up complete including taking down old unsv one and all as specified and directed by Engr-in-Charge.

Supply,fix and test, in replacement of LED Flood light luminaire with high power of capacity 50Watts suitable for working 220-240v AC, 50HZ with inbuilt power unit, Pressure die-cast Aluminum housing with all accessories,connecting up Complete including taking down u/s fitting complete all as specified and directed by Engr-in-Charge.

Supply,fix and test, in replacement of LED Street light fitting of capacity 35 Watts, CRI >70, Power factor > 0.95, colour temperature 5700K, luminous Efficacy not less than 100 lumen/watt, 3500 Lumens output with IP 66 protection and impact resistance of IK-08 having lens embedded PC Cover bottom opening seprate driver compartment including taking down old u/s fitting complete all as specified and directed by Engr-in-Charge.

Supply,fix and test, in replacement of LED Street light fitting of capacity 45 Watts, CRI >70, Power factor > 0.95, colour temperature 5700K, luminous Efficacy not less than 100 lumen/watt, 4500 Lumens output with IP 66 protection and impact resistance of IK-08 having lens embedded PC Cover bottom opening seprate driver compartment including taking down old u/s fitting complete all as specified and directed by Engr-in-Charge.

S&F in replacment Gate/Lawn Post top lantern LED light fitting of 15 Watts LED Coral type with spun aluminium landscape luminaire,Opal PC Cover offers soothing uniform illumination with IP 65 protection with Suitable fixing Nuts for fixing the fitting including taking down the u/s fitting complete all as specified and directed by Engr-in-Charge. Make : Havells/Philips/Wipro/Crompton

S&F in replacement LED Bollard Garden ligtht of 9W with excellent light output through its PMMA Windowsensuring maximum illumination surrounding with IP 65 protection of Height <1 Mtr with fixing accessories including taking down the u/s fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of decorative gate light fitting made up of high grade unbreakable polycarbonate material suitable for 20 LED lamp B22 base including B-22 LED lamp of 20 watt with holder suitable for fixing 60 mm outer dia pole connecting complete all as specified and directed. Make :-Havells or equivalent in Crompton/Philips/Wipro. Note for item No 31 to 41 :- (1) Test certificates in support of the technical parameters of the light fittings is to be submitted in original to the Engr-in-Charge by the contractor. (2) Any items\ missing but technically required for effcient performance of the fittings/fixture is deemed to be included in the unit quoted rates.

Supply only Electronic Driver Input Voltage Range 160V to 260V AC Single Phase 50 Hz and Output Voltage not exceeding 60V DC, including Inbuild SPD suitable for 120 to 150 Watt LED type fitting all as specified and directed by Engr-in-Charge.complete all as per Make-Philips/Wipro/Crompton/Havells

All As per item No.42 but suitable for 90 to 100 Watt LED type light fitting.

All As per item No.42 but suitable for 60 to 75 Watt LED type light fitting.

All As per item No.42 but suitable for 45 to 50 Watt LED type light fitting.

All As per item No.42 but suitable for 25 to 30 Watt LED type light fitting.

Supply only Electronic Driver Input Voltage Range 160V to 260V AC Single Phase 50 Hz and Output Voltage not exceeding 60V DC, including Inbuild SPD suitable for Gate light fitting 15-25W LED (driver only) all as specified and directed by Engr-in-Charge.

Supply only PCB of LED street light fittings suitable for 25 to 50 Watt fitting complete all as per Make-Philips/Wipro/Crompton/Havells

Supply only PCB of LED street light fittings suitable for 60 to 75 Watt fitting complete all as per Make-Philips/Wipro/Crompton/Havells

Supply only PCB of LED street light fittings suitable for 90 to 100 Watt fitting complete all as per Make-Philips/Wipro/Crompton/Havells

Supply only PCB of LED street light fittings suitable for 120 to 150 Watt fitting complete all as per Make-Philips/Wipro/Crompton/Havells

Supply only surge Protector not less then 5kV suitable for 25/30/45/60/75/90/100/120/150 Watt LED type light fittings complete all as per direction by Engr-in-Charge. Make : -Philips/Wipro/Crompton/Havells

Supply and fix in replacement bracket suitable for street light, made out of 40 mm dia 1.5 mtr length GI pipe light grade bent to shape fixed with suitable size of clamps (2 Nos), bolts, nuts and washers incl painting with one primer coat and two coat of aluminium paint complete incl taking down old unsv one and all as specified and directed by Engr-in-Charge.

Supply and fix in replacement bracket suitable for street light, made out of 25 mm dia 1.5 mtr length GI pipe light grade bent to shape fixed with suitable size of clamps (2 Nos), bolts, nuts and washers incl painting with one primer coat and two coat of aluminium paint complete incl taking down old unsv one and all as specified and directed by Engr-in-Charge.

S & F Rigid Non-metallic PVC conduits medium grade (for passing the pvc insulated cable along the pole) of external dia not less than 20 mm including GI/Aluminium clamp for fixing the conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories with aluminium clamp,bolt, nuts etc for fixing including taking down old u/s conduits complete all as specified and directed by Engr-in-Charge.NOTE: PVC insulated cable shall be measured and paid separately.

S&F in replacement of PVC insulated flexible multicore round copper conductor cable of size 3 core 1.5 Sqmm including necessary end connector fixed in PVC Conduit along with pole structure etc with all fixing & connecting accessories including taking down the old Unsv wire from pole all as specified and directed by Engr-in-Charge.NOTE: PVC conduit shall be measured and paid separately.

S&F in replacement PVC insulated flexible multicore round copper conductor cable of size 3 core 2.5 Sqmm including necessary end connector incl taking down unsv cable complete all as specified and directed by Engr-in-Charge.

Supply,fix and testing of Control panel single phase factory fabricated (CPRI type-tested) 6.0KW with MCB SPN 40 A, contactor TP-32 A-01 No, Digital Timer Control Panel, outdoor type including connected switch gears, cables, etc. and suitable sheet metal enclosure test and commisioning of Panel of 240V, out door(IP-54) cubical type with suitable provision of 25x25x3mm angular base and vertical frame along with necessary PCC foundation and locking arrangement incl taking down old unsv one complete all as specified and directed. Make : Havells,Cat No:IHXSS01060 or tech-commercially equivalent in L&T/Legrand

Supply & Fix Automatic Timer switch suitable for 03 phase 415 Volts 50 Hz with Nature switch-02 EC infra ray sensor with pre dawn switching off timer, ,MCB, power contactor, and glass wool panel , infra ray sensor with pre dawn switching off timer, 4-8hrs, of Maximum load capacity of 4kw per phase. Degree of protection conforms to IP65. Cat No. SWADEEP-02EC12KW3P of Nature Switch or equivalent in Legrand/SEIMENS.

Supply and fixing Automatic timer switch suitable for single phase 230 Volts 50 Hz with Nature switch-02 EC, infra ray sensor with pre dawn switching off timer, 4-8hrs ,MCB, power contactor, and glass wool panel of Maximum load capacity of 3kw, Degree of protection conforms to IP65 Cat No. Swadeep- 02 EC3KW1P of Make: Nature Switch or equivalent in Legrand/SEIMENS.

Supply,fix and testing of Control panel three phase factory fabricated (CPRI type-tested) 6.0KW with MCB TPN 40 A, contactor TP 32 A-1 No,Digital Timer Control Panel, outdoor type including connected switch gears, cables, etc. and suitable sheet metal enclosure test and commisioning of Panel of 415V, out door(IP-54) cubical type with suitable provision of 25x25x3mm angular base and vertical frame along with necessary PCC foundation and locking arrangement incl taking down old unsv one complete all as specified and directed. Make : Havells, Cat No:IHXTS03060 or tech-commercially equivalent in L&T/Legrand Note: for item No 58 to 61 :- The quoted rate shall be inclusive of the following:- (i) Suitable copper control wiring inside Panel boards, cable glands, cable lugs, supporting, insulators etc., (ii) Quoted rate is inclusive of angular base frame and PCC foundation Earth work and connected accessories. (iii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

Material and Labour for preparation of old painted surfaces for ZEBRA painting of PCC/steel poles 9/11 m long alongwith road/Perimiter wall with one coat of enamel synthetic paints using yellow and Black colour in alternate layer of 30 cm upto 1.5 mtr above Coping/GL incl painting of pole coping with Black colour and writing pole No. all as specified and directed by Engr-in-charge

M & L for preparation of old painted surfaces of street light steel tubular poles 9/11 mtr alongwith road/permiter wall including cross arms channels, flat iron clamps by scrapping with wire brush and applying one coats of aluminium paint incl painting of pole coping with Synthetic enameled black colour including pole numbering all as specified and directed by Engr-in-charge..

Labour only for repair of street light/flood light/gate light LED fitting of capacity 25W /30W /45W /50W /60W /72W /90W /120W/150W , disconnecting and bringing down from pole, fixing after repairs including replacement of unserviceable spare parts all as specified and directed. Note:- The unserviceable spare parts replaced shall be measured and paid seperately.

Repair and refixing of High mast lights fitting of any type by removing from existing position and refixing after repair including the replacement of following items complete all as specified and directed. (a) Electronic Driver 100W to 200Watt suitable for LED light fitting of rating. (b) Surge Protector not less than 5 KV rating suitable for 100W to 200Watt LED light fittings. (c) PCB suitable for LED flood light fittings 100W to 200Watt Note : (i) Items mentioned at (a) to (c) above to be incorporated in the work will be measured and paid seperately under respective item supply only items. (ii) T&P / Vehicle mounted Telescopic Ladder required for carry out the repair work on lights at a height up to 15 meter will be arranged by contractor at their own cost & the cost shall deemed to be inclusive in the quoted rate.

M&L for trimming/clearing of tree branches leaves etc in such a way that there must be a clearance of atleast 1.5 Mtr radius from the street/security light fitting/ over head lines incl cutting branches of size not exceeding 80mm dia complete all as directed at site and disposal of branches/bushes to a distance as indicated for purpose of fire wood for cookhouses of Army Units within the Army Unit and clearing the site all around street/security light fittings etc etc.So as to facilitate proper illumination complete all as specified & as directed. Note : for Item No 62 to 66 (i) Ladders scaffolding, safety belts etc required for execution of the works shall be arranged by the contractor & the cost of the same is deemed to be included in the unit quoted rates. (ii) Contractor shall be fully responsible for the safety aspects of the people engaged by him & any issues (if any) arising during the work shall be dealt by the Contractor & the Dept shall be no way responsible whatsoever.

S & F in replacement of Steel tubular swaged poles, 9 meters long complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 inclusive of one primer coat of red oxide zinc chrome primer and two coats of aluminium paint including preparation of surfaces and writing Pole No complete incl Dimantling of old existing PCC Pole alongwith PCC Coping and removing from site complete all as specified and directed by Engr-in-Charge. Note : (i) Design/Drawing/BOM of pole is to be obtained from the Maufacturer/Authorised supplier and the same is to be got approved from Engr-in-Charge prior to making order to the Manufacturer/Supplier. (ii) Earth work and PCC shall be measured & paid separately. Make: IndiaTube&Co,India Electric Poles / National Tubing Co. / Sankhla Udyog

Supply of Solar Charge Controller 5Amp with protection circuits for 12 watt to 20 watt Solar Light System: 12V Nominal Capacity: 50Wp Max Regulation: Low Loss, Shunt Type OVD Battery Charging Type: PWM Protections: Short Circuit and Overload at load Reverse polarity of battery and panel Reverse current flow from battery to panel Make: Axxon/ Crompton/ Havells.

Supply of PIR Motion Sensor 170uA for 12 to 24Watt Solar Light Standard Detection 5m Lens Color : White Conditions Concerning target 1. The temperature difference between the target and the surroundings should be superior to 4 deg C 2. Movement speed : 1.0m/s 3. Target concept is human body. Make: Axxon/ Crompton/ Havells.

Supply of Lithium Battery 11.1V/ 28.6Ah with BMS Circuit and other necessary wires and connectors suitable for Integrated Solar Lights. Make: Axxon/ Crompton/ Havells.

Supply of Lithium Battery 11.1V/ 19.8 Ah with BMS Circuit and other necessary wires and connectors suitable for Integrated Solar Lights. Make: Axxon/ Crompton/ Havells.

Supply and fixing energy efficient Lithium based Energy Efficient Integrated Solar Street Light of 12Watt, encases with Monocrystalline Solar PV Module of 44/46Wp , Lithium ferro Phophate battery with in built BMS Technology 11.1/12.8V, 24.6AH, IP> 65, High brightness W-LED(160-180lm/watt) lamp with Aluminum reflector for better light distribution , CRI >70, Color Temperature 5700K - 6500K, MPPT Solar charge controller and aluminium extruded body & is specially programmed to automatically controlled the dimming and brightness (with PIR Motion Sensor), Dusk to Dawn Operation, suitable to working temperature: (-) 10C to (+)55C, weight not more than 10-12kg with adjustable MS clamp alongwith fixing arrangment for pole/wall mounting etc complete as required. Protections: Short Circuit, overload, Reverse polarity and battery protections. Make:- Wipro/Crompton/ Havells/Axxon.

Supply and fixing energy efficient Lithium based Energy Efficient Integrated Solar Street Light of 15/16Watt, encases with Monocrystalline Solar PV Panel of 30/35Wp , Lithium ferro Phophate battery with in built BMS Technology 11.1/12.8V, 24.6AH, IP> 65, High brightness W-LED(160-180lm/watt) lamp with Aluminum reflector for better light distribution , CRI >70, Color Temperature 5700K - 6500K, MPPT Solar charge controller and aluminium extruded body & is specially programmed to automatically controlled the dimming and brightness (with PIR Motion Sensor), Dusk to Dawn Operation, suitable to working temperature: (-) 10C to (+)55C, weight not more than 10-12kg with adjustable MS clamp alongwith fixing arrangment for pole/wall mounting etc complete as required. Protections: Short Circuit, overload, Reverse polarity and battery protections. Make:- Wipro/Crompton/ Havells/Axxon.

NOTE for item 1.00 to 22.00 :- Any damages made to the existing services of MES/PHED/Defence nits/Other Depts like HT/LT UG cables, Water Supply/Sewage Pipe lines, OFC/BSNL/Signal communication cables etc. during the excavation/boring/road cuting etc. progress of the work shall be made good with proper jointing kits etc. as per original to the entire satisfaction of Engr-In-Charge & GE & the cost of the same is deemed to be included in the unit quoted rates. Decision of the AO shall be final & binding.

National Rewinding Works (BID ID -3438525)

Devi Engineeing (BID ID -3438041)

DEVARAM CONSTRUCTION COMPANY (BID ID -3443939)

GITANSH ENGINEERS AND COMPANY (BID ID -3435072)

PANKAJ ENTERPRISES (BID ID -3435905)