Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹94.7 LAccepted-AOC H NO 89 BEHIND DD LEH UT LADAKH | LEH | LEH | LADAKH | 194101 | L1 | Accepted-AOC L1 | |
| 2 | L2₹1 Cr+₹5.3 L (5.55%)Rejected-Finance 0 SHOP NO 48 BHAGAT SINGH COMPLEX VYAPAR VIHAR ROAD CAR PLANET VYAPAR VIHAR BILASPUR BILASPUR CHHATTISGARH 495001 | BILASPUR | CHHATTISGARH | 495001 | L2 | Rejected-Finance Other Than L1 | |
| 3 | L3₹1.0 Cr+₹9.4 L (9.95%)Rejected-Finance | L3 | Rejected-Finance Other Than L1 | |
| 4 | L4₹1.1 Cr+₹18.9 L (20.0%)Rejected-Finance A 102 GOLDEN SAND APARTMENTS GAZIPUR DHAKOLI ZIRAKPUR PB 160104 | ZIRAKPUR | S A S NAGAR | PUNJAB | 160104 | L4 | Rejected-Finance Other Than L1 | |
| 5 | L5₹1.2 Cr+₹25.4 L (26.8%)Rejected-Finance 403 GH MANSADEVI COMPLEX PANCHKULA 134109 HARYANA | PANCHKULA | HARYANA | 134109 | L5 | Rejected-Finance Other Than L1 |
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
14 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Cdr, HQ 138 WE
HQ 138 Works Engineers PIN-914138 C/O 56 APO
PROVN OF EXTENSION OF SOLAR ELECTRIC POWER FROM 1 MW SOLAR POWER PLANT TO UNITS OF SKAMPUK AREA UNDER GE PARTAPUR
2023_MES_579546_1
138WE/L-75/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE Partapur
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE Partapur
₹2.2 L
Yes
1 May 2023
7 Feb 2023
21 Mar 2023
7 Feb 2023
14 Mar 2023
28 Feb 2023
Amount
Supply, installing, testing and commissioning of distribution transformer outdoor type stepdown, pole mounted, 11/0.433 KV (at no load) with HT 3 phase and LT 3 Phase 4 wire AC, 50 Hz, 100 KVA level-II, copper wound with off load tap changing arrangement on HT side for a variation of secondary voltage +/- 7.5% in steps of +/- 2.5% including suitable cable entry boxes on LT side and HT bushing on primary side complete in all respects with standard accessories and fitments confirming to IS: 1180 amended upto date and test ECBCcomplete all as specified and directed by Engr-in-Charge. including the followings:- (a) Earthing terminal and rating diagram plate. (b) Air release device. (c) Oil Filling inlet pipe with plug. (d) Drain outlet pipe with brass gate valve with dummy plug. (e) Conservator with level gauge. (f) Silica gel with breather. (g) First oil fill up to the recommended level by the manufacturer with new oil confirming to IS 335. (h) Type of connector - Star/Delta. (j) Type of cooling - ONAN (k) Vecotr Group - DYN 11. (l) Type of connecting arrangement - HT XLPE cable connection on HT side and cable connection on VCB side. (m) Provision of thermometer with pocket. (n) Oil and winding alarm and trip relay including marshal box. (n) The transformer of 100 KVA full capacity shall be designed to function properly at high altitude of appx 3048 M abvoe sea level and outside temperature conditions between -35 degree celcius to + 20 degree celcius. (o) Factory inspection shall be carried out for transformer.
Supply, installing, testing and commissioning of distribution transformer outdoor type stepdown, pole mounted, 11/0.433 KV (at no load) with HT 3 phase and LT 3 Phase 4 wire AC, 50 Hz, 200 KVA level-II, copper wound with off load tap changing arrangement on HT side for a variation of secondary voltage +/- 7.5% in steps of +/- 2.5% including suitable cable entry boxes on LT side and HT bushing on primary side complete in all respects with standard accessories and fitments confirming to IS: 1180 amended upto date and test ECBC, complete all as specified and directed by Engr-in-Charge. including the followings:- (a) Earthing terminal and rating diagram plate. (b) Air release device. (c) Oil Filling inlet pipe with plug. (d) Drain outlet pipe with brass gate valve with dummy plug. (e) Conservator with level gauge. (f) Silica gel with breather. (g) First oil fill up to the recommended level by the manufacturer with new oil confirming to IS 335. (h) Type of connector - Star/Delta. (j) Type of cooling - ONAN (k) Vecotr Group - DYN 11. (l) Type of connecting arrangement - HT XLPE cable connection on HT side and cable connection on VCB side. (m) Provision of thermometer with pocket. (n) Oil and winding alarm and trip relay including marshal box. (o) The transformer of 100 KVA full capacity shall be designed to function properly at high altitude of appx 3048 M abvoe sea level and outside temperature conditions between -35 degree celcius to + 20 degree celcius. (p) Factory inspection shall be carried out for transformer.
Supplying, laying, jointing, testing and commisioning HT 11 KV (E) XLPE cable, insulated, screened, sound compacted aluminium conductor, screening with extruded semi conducting layers, insulation screening with copper tape covers laid up with PVC (ST-2) extruded inner sheathed GI strip armoured PVC (ST-2) out sheathed, ISI marked with IS-7098 Part II with amendment, size 3 core & cross section area 95 Sqmm, laid in trenches/pipes/ducts/along poles/walls/ equipment etc, complete all as specified and directed by Engr-in-Charge.
Supply and fix cable jointing kit for 11 KV grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 sqmm 3 core indoor/outdoor type, complete all as specified and directed by Engr-in-Charge.
Supply and fix cable jointing kit for 11 KV grade cable for out door termination (end joint) cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, AI conductor cable of size 95 Sqmm, complete all as specified and directed by Engr-in-Charge.
Supply and fixing for Steel Tubular Swaged pole, type 410 SP -55 (11.00 Metre long) complete with & including cast iron base plate, final taper plug, bolts, nuts screws, drilling work, painting & numbering to poles complete all as specified and as directed. Notes:- (i) Excavation & earth work, PCC for foundation and coping shall be measured and paid for seperatelly under relevant items of schedule 'A' (ii) Provn of painting and numbering i.e applying one coat of black bitumenous paint on embedded portion, making five numbers alternate white&black strips 30cm height each (upto 1.50 metre height from top of PCC coping) with two coats of synthetic enamal paint over a coat of red oxide primer and painting the remaining external surface with two coats of aluminium paint over a coat of red oxide primer and numbering to the poles with synthetic enamel paint etc shall be deemed to be including in the quoted rate of above item, complete all as specified and directed by Engr-in-Charge.
Supply and fixing Cross arms, bracings, supports,clamps and back plates fabricate from structural steel sections including nuts, bolts, washers,welding, bending cold or hot,drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, on under coat and one finishing coat of paint, complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete in foundation, filling and mass concrete type B1 1:2:4 using 20mm graded stone aggregate for LT panel board/poles foundation, complete all as specified and directed by Engr-in-Charge.
Supply and fixing lightning arrestor HT 11 KV 65 KA station class, complete all as specified and directed by Engr-in-Charge.
Supply and fix HT 11 KV out door type gang operated air-break switch suitable for horizontal or vertical mounting roatating type complete with drop out fuse having 12 insulators of rating upto 200 Amps, complete all as specified and directed by Engr-in-Charge.
M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI strip 32 x 6 mm as earthing lead by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on complete all as specified and directed by Engr-in-Charge.
Supply and fixing Earth continuity conductor or main earthing lead GI Strip 32x6 mm size ,fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing complete all as specified and directed by Engr-in-Charge.
Supply, laying & testing cable XLPE isulated, screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium 70 Sqmm 3.5 Core, complete all as specified and directed by Engr-in-Charge.
Supply, laying & testing cable XLPE isulated, screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium 50 Sqmm 3.5 Core, complete all as specified and directed by Engr-in-Charge.
Supply, laying & testing cable XLPE isulated, screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium 95 Sqmm 3.5 Core, complete all as specified and directed by Engr-in-Charge.
Supply, laying & testing cable XLPE isulated, screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium 185 Sqmm 3.5 Core, complete all as specified and directed by Engr-in-Charge.
Excavation in trenches not exceeding 1.5 m wide and and not exceeding 1.5 m depth in hard/ dense soil and getting out, complete all as specified and directed by Engr-in-Charge.
Returning, filling in, with excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed by Engr-in-Charge.
Removal of surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed by Engr-in-Charge.
Supply and laying sand cushioning for under ground cable 8 cm before laying the cable and 15 cm after laying and streching the cable protection in trenches complete all as specified and directed by Engr-in-Charge.
Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed by Engr-in-Charge.
Sona Enterprises
RAVI KUMAR
AP BUILDERS
EESSI
Rajan Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .