INTERIOR WORKS FOR INDUSTRY CONNECT AND OUTREACH FACILITY AND BOARD ROOM IN MAIN BUILDING AT IISER PUNE.

ALL RATES IN THIS BOQ ARE EXCLUDING GST, GST SHALL BE PAID EXTRA AS PER PREVELLING RATES. BIDDER SHALL QUOTE ACCORDINGLY.

Removing of existing calcium silicate/grid ceiling by removing side boards, grid tiles, grid work and internal GI/aluminium frame work and stacking usable material with campus and disposal of non usable material to scrap yard/dumping yard with in IISER Pune campus or at location approved by Engineer In-charge within campus. Actual one side area of wall dismantled shall be measured for payments.

Removing of existing calcium silicate partition by cutting in size/making opening as directed by by the Engineer In-charge up to 100mm thickness by removing both side boards, removing internal GI/aluminium frame work and stacking usable material with campus and disposal of non usable material to scrap yard/dumping yard with in IISER Pune campus or at location approved by Engineer In-charge within campus. Actual one side area of wall dismantled shall be measured for payments.

Providing and applying decorative Glass film/printed glass film as per approved design. Quoted rate shall be including cost of cleaning of glass , making wall dust free for application of glass film and applying film as per line and level etc complete. Glass film catalogues shall be brought for approval of wall paper before starting of work.

GRID CEILING WORK: Providing and Fixing 15 mm thick eco friendly light weight false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. NRC shall be minimum 0.5.

Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with: 10mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.

Deployment of Tempo ( 407 )/tractor trolley and adequate Manpower for Shifting of debris , unserviceable material to IISER Scrap yard or dumping yard as per site requirement. Material to be collected from corridors of Main Building ( G+2 ) as per directions of Engineer In-charge , unserviceable material to be shifted to scrap yard. Quoted rate shall be including the hire charges, labours, transport, fuel , tools tackles, operators charges etc , insurance of equipment and operator, etc. complete. Copy of valid license shall be available with the driver along with the Registration Certificate ( RC ) copy and shall be submitted to IISER Pune for records. Nothing extra shall be paid separately. Actual number of trips as per Log Sheet duly approved by Engineer In-charge or his representative shall be measured for payments. Agency shall maintain log-sheet of deployment and get daily certified from department on same day and shall be submitted along with running account bill for payments. Quoted rate shall be including cost of labour , tools , ( GST Extra ) ,taxes , minimum labour wages , etc complete. Nothing extra shall be payable separately. Minimum volume to be shifted shall be 1 brass unit.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For fixed portion , Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For fixed portion , Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying two or more coats of water based luster paint on wall and ceiling including two coat of approved primer on wall and ceiling with roller finish including preparation of surface by crack filling with expandable specialized crack filler, sand papering and applying primer, 2mm gypsum putty in line and level to all surface in line and level, two or more coat Paint on complete surface so as have and even and smooth surface, scaffolding all leads and lifts, labour , removal of existing old paint scraping, making surface ready for putty and cost of materials complete as per direction of Engineer-in-charge. Quoted rate shall be including 2mm thick wall putty of approved make Quoted rate shall be including expandable acrylic mortar in the cracks, primer work including cost of primer in internal walls at any heights prepare surface by cleaning (Rate is inclusive of cost of all operations, material labour, all taxes, ( GST Extra ) , etc. and nothing extra shall be payable).

OPEN CELL CEILING : Providing and fixing Open Cell grid in ceiling in new framework with open cell tiles at all heights with false ceiling tiles of Size 595x595mm of approved design and patterns as per Specifications to be laid in true horizontal level. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Cells shall be equal 8X8 of size shall be 75mm X 75mm each. Approved make IGL / Armstrong / Altiris/RK CEILING. Quoted rate shall be including cost towards removing and stacking of existing tiles.

Providing and fixing auto-closing hinges of minimum size 25 mm × 50 mm made of stainless steel suitable for wooden cabinet / furniture shutters, including necessary screws, setting of hinges in line and level of door shutter etc. complete as per manufacturer’s specifications and as directed by the Engineer-in-Charge. Approved Make Godrej/Hettich/Hafele

Providing and fixing brush finished/smooth finished stainless steel furniture D type handle of minimum size 100 mm made of stainless steel suitable for wooden cabinet / furniture shutters, including necessary screws, setting of hinges in line and level of door shutter etc. complete as per manufacturer’s specifications and as directed by the Engineer-in-Charge. Approved Make Godrej/Hettich/Hafele

Removal and refixing of wooden slates from walls without damaging the slate members, supporting structure including removing nails/screws, stacking and protecting by plastic wrapping the slats properly at site, and quoted rate is including refixing the same wooden slats in position to correct line and level, aligned with adjoining/nearby walls, including necessary nails/screws, minor adjustments, and all finishing works complete as directed by the Engineer-in-Charge.

Providing and fixing Laminated HDF grooved wooden slat wall cladding panels of approved make, comprising grooved and fluted perforated wooden slat panels of approved size or as size directed by the Engineer In-charge. The panels shall be manufactured from High Density Fibre wood board (HDF) with a minimum density of 700 kg/m³. The front exposed face shall have an approved laminated finish of minimum 0.5mm thickness in approved shade and texture, there shall be balancing protective coat of polish at reverse side. The panels shall incorporate a special perforation and fluted groove pattern, consisting of 3 mm wide grooves with a visible pitch as approved by Engineer In-charge on the exposed surface. Panels edges shall be provided with tongue-and-grooved jointing system, designed to receive concealed fixing for proper alignment and secure installation. The rear face of the perforated panels shall be factory-backed with sound-absorbing non-woven acoustical fleece. The quote rate shall be including the following, 1. Preparing surface for installation of slates by planning and cleaning as per site requirement, sealing all the joints between backing plywood by external grade sealant of DOW/SIKA/Dr. Fixit sealant to prevent the entry of water and air from external side. 2. Providing and fixing specially made GI Channel of 32X50X0.5 at an internal of 600mm horizontally enabling to fix the CC Aluminium Channel of 18mm. Providing and fixing specially made aluminium channel extrusion with flange on either sides enabling to hold keel insert clip. 3. Providing and fixing actual wooden slates over the aluminium channel with the help of aluminium keel insert clip system, complete in all respects to hold Wooden Slates in perfect line and level. Quoted rate shall be including materials, accessories, fixing hardware, cutting, finishing, and installation in perfect line and level, including wastage, cleaning of site, shifting debris to approved dumping yard within campus etc Complete as per as per the instructions of Engineer-in-Charge. Actual visible area in the elevation shall be measured for the payments. 10% tolerance in sizes and unit weights shall be acceptable. Nothing extra shall be paid separately. Bidder shall quote rate without GST, GST shall be paid as per present rate.