REPAIR RESURFACING OF ROADS HARD STANDING OF ZONE A AND B UNDER GE WEST HISAR

Amount

Scarrifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm and exe 50mm deep but not exceeding 100mm deep

M & L for 150mm thick (compacted thickness) WBM in two layers each of 7.5cm thick, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to 8 to 10 ton power roller to required gradient and camber.

M&L Premix bituminous, macadam using paving bitumen, VG-30, laid with paver and rolled and compacted with 8 to 10 ton power roller to required gradient and camber (consolidated thickness 75mm or less)

M&L preparing unsurfaces water bound macadam surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

M&L for applying evenly a priming/tack coat with bituminous primer using paving bitumen at 10 kg per 10 Sq mtr

M&L Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust land mud, or water scoring sunken surfaces in roads, paths etc. cutting around edges to least 25 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm

M&L preparing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with mechanically brooms and finally fanning thecleared surface with gunny and mechanical air compressor to remove all loose dirt etc.

M&L for applying evenly by using mechanical sprayer machine a priming/ tack coat with bituminous primer using paving bitumen VG-10 at 05 Kg per 10 Sqm

M&L for 30mm Bituminous premix asphatic semi dense concrete (30mm consolidated thickness) with minimum 5.5% binder content VG-30 by weight of total mix, laid. Spread with automatic senser mechanical paver, rolled and compacted with 8 to 10 ton power roller to required camber and gradient complete Note : 1 : Materials shall be mixed in hot & mix plant as approved, plant shall be not more 10 year vintage. 2. Cost of transport from plant to site shall be included in quoted amount. 3. Filler shall be mixed as per desing mix or minimum 2% by weight of mix, amount of filler not to be paid seperately.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 Coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required complete including taking out old/ existing kerb stone and remove from site as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade of approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.

Providing and laying 80mm thick factory made chamfered edge cement, concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand

Demolition of stone slab and tiles of any description or thickness in floors, apron etc laid bedded and pointed in any mortor etc complete all as specified and directed by Engineer-in-Charge.

M&l for chequred cement concrete tioles, factory made, cement concrete with approved colour, design & pattern as in footpath, parks, lawns drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould laid in required colour & pattern of size 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry with grey cement and with pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:4 complete

Material and labour 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base, surface finished fair and even complete all as specified.

Supply and fixing as in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red, and yellow reflector radioum tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed including taking down of existing delinator of any type.

Supply and fixing as in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972.0 fixed with and incl MS stud of suitable size as per manufactures linstructions

M&L for praparing bituminous surfaces of road and marking 1.50mm thick centre lines, stop lines, dashes, arrows etc and the line n exc 10cm wide on roads pavements with hot applied thermo palstic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed.

M & L for preparing old stone, concrete surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint of any tint etc complete all as specified and as directed by Engineer-in-Charge.

M & L for preparing old stone, concrete surfaces (Kerb Stone Painting) of any description over 10cm width or girth and applying one coats of synthetic enamel paint of any tint etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair solar cat eye aluminium alloy shall (100% each water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) lof gigh efficiency mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18, 000 mcd completed as per manufactures instructions etc all as specified and directed including taking down cat eye of any type.

malik constructions (BID ID -3332517)

M/S Sulakh Brothers (BID ID -3324949)

Sh. Raj Kumar Malik Contractor (BID ID -3325102)

PAWAN KUMAR (BID ID -3325178)