Replacement of Conventional light fitting with energy efficient LED fitting, AC Celling fans with BLDC ceiling fans, P.T. Switches with modular switches, providing air conditioners, water heater etc. in the official Residence of Additional District

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group B

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

2 way 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 X 10 sq. mm (19mm)

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and paint etc. as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying of 9 watt LED ADORE PLUS 9W E27 CDL 3 Star rated lamp equivalent to HAVELLS LHLDDDBIB2R008 complete or its equalent to ISI standard.

Supplying of 20 W Surface/Suspended LED batten, CRCA housing for efficient heat dissipation with built - in electronic driver having THD < 10% similar to HAVELLS STOUT MINI code STOUT MINI 1200BS20WLED865PCWH complete or its equalent to ISI standard.

Supplying of 10 watt basic all purpose surface and wall mouted LED batten with polycarbonate housing & integrated driver similar to HAVELLS LUMLINE code LUMILINEBS 10WLED865SPCWH complete or its equalent to ISI standard.

Supplying of 24 watt square aesthetically desiged 1 x 1 surface LED flat panel for surface mounting which provides soft light and glare free symmetrical illumination similar to Havells PLUTO PANEL (SURFACE) PLUTO1x1PLS24WLED857S complete or its equalent to ISI standard.

Supplying of LED 24 watt square high efficency 1 x 1 recess mounting LED flat panel with high brightness LED glare free homogenenous illumination similar to Havells PLUTO 1 x 1 code PLUTO1x1PLR24WLED857S complete or its equalent to ISI standard.

Supplying of 18 watt round surface mounted downlight with ABS housing & PC Opal diffuser with integral electronic LED driver similar to HAVELLS GLOW (SURFACE) code GLOWGENXDLS18WLED857S complete or its equalent to ISI standard.

Supplying of 10 watt round surface mounted downlight with white powder coated polycarbonate decorative housing and pressure die cast heat sink having high efficency with heavy duty driver THD<10% similar to HAVELLS INTERGRA NEO (SURFACE) code INTERGRANEOSURFACEDLS10WLED830S complete or its equalent to ISI standard.

Supplying of 10 watt recess mounting downlighter with pressure die-cast aluminium heat sink & PC diffuser in white power coated finish with integral electronic low THD (<10%) LED driver similar to HAVELLS INTERGRA NEO code INTERGRANEODLR10WLED840S complete or its equalent to ISI standard.

Supplying of 09 watt Environment friendly ultra modern energy saving surface mounted decorative hexagon bulk head back lit LED luminaries comprising of high brightness LEDs similar to HAVELLS HEX10W - IP66 code HEXAFT10WLED857SSYMBOPC complete or its equalent to ISI standard.

Supplying of 25 watts new generation IP 65 LED post top energy saving environment friendly, long life aesthetically designed with symmetrical light distrubution spun aluminium landscape luminaries with power LEDs as light source clear cover offers bright illumination for different application similar to HAVELLS RUBY LED POST TOP code RUBYPT25WLED757SSYMTOPC complete or its equalent to ISI standard.

Supplying of 45 watts new generation energy saving environment friendly, long life LED street light made up of pressure die cast aluminium housing with high effcency LED as lighting source and lens embeded PC cover having bottom opening seperate driver compartment with IP66 protection and impact resistance of IK08 similar to HAVELLS ENDURA SUNDOWN code ENDURASUNDOWNSL45WLED765PASYBOPC complete or its equalent to ISI standard.

Supplying of BLDC ceiling fan 1400mm sweep similar to HAVELLS Efficiencia Neo BLDC colour white SKU code FHCN5SWHT56 complete or its equalent to ISI standard.

Supplying of BLDC ceiling fan 900mm sweep similar to HAVELLS Efficiencia Neo BLDC colour white SKU code FHCN5SWHT36 complete or its equalent to ISI standard.

Supplying and fixing of wall fan 400mm sweep similar to HAVELLS D'Zire Grey code FHWAGPMDRW16 complete or its equalent to ISI standard.

Supplying of ventilating fan 200mm sweep similar to HAVELLS Ventil Air DX Super white Model SKU code FHVVEDXOWH08 complete or its equalent to ISI standard.

Supplying of electric storage water heater 10 ltrs capacity, rated power 2KW (5star rating) similar to HAVELLS Fabia colour whiteblue code GHWAFATWB010 complete or its equalent to ISI standard.

Supplying and fixing of wireless call bell similar to ANCHOR code 22740 complete or its equalent to ISI standard.

Supplying of following sizes XLPE insulated heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS: 7098 (Part I) and IS No: 1554 (Part - I) 1988 as applicable make : CCI/Gloster/Havells/Polycab/Finolex. etc as required.

2 core x 10 sq.mm

Supplying, installing, testing and commissioning of 2 Ton capacity 5 star (As per 2018 BEE star rating) inverter split type Air Conditioner with Rapid cooling, PM2.5 Air Filter, Duo Compressor, Golden Eva & Condenser Coil, Smart 4 way Swing (Single compressor 1 single phase 220 volt) Make: Hitachi Model 5100x inverter-R4110A-RMRG524HEEA 5 STAR or equivalent with minimum 18000 BTU (condenser coil must be of copper material) including cutting, drilling of minimum 100mm dia holes on the wall for passing gas pipes, fixing suitable size PVC pipe on the wall through the holes and cementing, painting to give an even look and smooth finish, wrapping PVC non adhesive white tape over insulation of gas pipe etc. as required and as per the direction of Engineer - in - charge.

Supplying, installing, testing and commissioning of 5 KVA electronic voltage stabilizer suitable for 2.0 ton Air Conditioner as required equivalent to V-Guard Model No.VG 500 or its equivalent to ISI standard

Providing and fixing of prefabricated stand for keeping outdoor unit of 1.5 ton / 2 ton capacity split type Air Conditioner as required.

DILIP RAJ

DAYAL HALDER

M/s G K Construction

AKABEA INFRASTRUCTURES PRIVATE LIMITED

M/s Sai Electrical Works

POWER ENGINEERING CO