construction of Ration shop at Pudhukinaru street in ward no. 41 West Zone. Roc No. 72/2024/MD5

Amount

Earthwork excavation in all soils including all initial lead and lift etc complete

Providing plain cement concrete 1:4:8 using 40mm hbg metal including all cost etc complete

R.C.C 1:1/2:3 mix using 20mm hbg metal including all cost etc complete

Centering with ms sheet sides and supports for R.C.C plinth beam and footing concrete including all cost etc complete

Centering withms sheet sides and supports for R.C.C Columns including all cost etc complete

Centering with ms sheet sides and supports for RCC roof beams and slabs including all cost etc complete

Supply and filling with well gravel layer by layer including cost of wateringa nd consolidation and ramming etc complete

Supply and fabrication of RTS rods at various dia including all necessary cutting, bending and tying etc complete

Fly ash brick work in CM 1:5 (one cement & five sand) using size 9''x4 3/8''x2 3/4'' including finishing,curing, etc complete complying with standard

Supply of P.V.C pipes and specials of approved quality including all cost etc complete

110mm dia P.V.C Pipes 6 kg/cm2

110mm dia P.V.C elbow

Supply amd erecting pull and push type manually operated rolling shutter with ISI make of approved size and section using 18GI sheets. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers transportation charges etc.

WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.5 by volume and laid in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinkling lime jiggery water as per standard specification etc., complete as directed by the departmental officers.

Plastering for RCC exposed surfaces, such as sunshade, beam, Roof ceiling, plastering 1:3 to 10mm thick inclding all cost ete complete.

Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to LS. at 2% by weight of cement used and the top pointed with same mortar mixed with red oxide to the full depth of tiles, complete complying with standard specification and as directed by the departmental officers.

Plastering in CM 1:5 to 12 mm thick incuding all cost ete complete.

Supply and fixing of mild steel door using all round "L" angle 25 X 25 X 6mm thick, cross bracing 20 X 6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc., Size : 0.60 X 1.85

Paving the floor with Vitrifled Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all Moors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to aligament etc., complete complying with standard specification

Daddoing the walls with first quality approved white glazed tiles of size 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/im2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Flooring finishing with first quality plain ceramaic tiles of all colours of size 30Scm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Painting with enamel paint two coats over one coat of primer coat for iron doors layer by layer with equal intervals using good quality approved colour paint including all cost etc complete.

Conveyance of excavated earth and dismantled depreeze from site to 15 km including alt cost etc complete

Supply and run of 2 of 4 sq mm(56/.3) PVC insulated SC unsheathed Cu.Conductor of 1100 v Grade in suitable PVC rigid pipe on wail and 3: ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed single core unsheathed copper Conductorcable of 1100V grade in suitableheavy gauge MS conduit pipeon wall and celling with MLS accessories inflush with wall with 150mm x 100mm x 75mm MS swithbox with 3mm thick ‘ hylum sheet cover for 5A 3pin non interlocking CS plug with continuos earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point.

Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessorie in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A switch with continous earth wire connection of SWGTC wire for making good of the concealed portion with suitable colour for PVC open light/Fan Point (For electronic regulator) (5 Points per coil)

Supply and fixing of Double pole 32 Amps MCP 240V/415 V 50 HZ-AC supply on suitable Tw board including all cost etc complete.

Supply and fixing of single box type 4°40 W flu fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specifications SD-83

Supply and fixing of 20 watts powersaver CFL lamp with necessary wall mount sockets and accessories including all cost etc complete.

Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

European Water Closet (Colour) with 'P‘ or ‘S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with Smm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be SOmm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be SOmm x 45mm with suitable rabate for housing the shutter

Supply and errrection of 1.20m dia RCC ring 0.30 m ht and 0.08m tk. Including all labour charges for errection in position etc complete

Supply and errection of 1.20m dia rcc slab of 0.08m tk including all labour charges for placing in position etc complete

Supply collection and filling of 40mm hbg metal for filter bed including all labour charges etc complete

SHARVESH AND COMPANY (BID ID -1249399)