Providing various SS Structure plinth and allied civil works and SS Erection works for additional one No 1 x 8 MVA Pr Trf at Exg. 33 KV SS KALINGAWARAM in Krishnagiri EDC Under DDUGJY Scheme.

Amount

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m - In Hard Gravely Soil

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m - MR and DMR not requiring blasting

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m - Hard rock requiring blasting

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m - Hard rock wedging & chisseling

PCC 1:3:6, using 40mm HBG machine crushed metal for foundation padding concrete including cost of cement and all materials, curing, lead, lift etc., complete. - FOR TRANSFORMER PLINTH AND STRUCTURE PLINTHWITH OUT FORM WORK

PCC 1:3:6, using 40mm HBG machine crushed metal for foundation padding concrete including cost of cement and all materials, curing, lead, lift etc., complete. - FOR TRANSFORMER PLINTH AND STRUCTURE PLINTHWITH FORM WORK

PCC 1:2:4, using 12 to 20 mm HBG machine crushed metal for Plinth with formwork including cost of cement and all lead, lift , curing etc., complete

RCC 1:1.5:3 mix using 12mm to 20mm HBG metal (machine crushed) for breaker plinth with form work including all cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement ( By using mixer machine and vibrator )

RCC 1:1.5:3 mix using 12mm to 20mm HBG metal (machine crushed) for precast slab with form work including all cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement ( By using mixer machine and vibrator )

Brick work in CM 1:3, using good quality country bricks for Steps and cable duct of size 23 x 11 x 7 cm including cost of all materials, labour, lead, lift, curing and transporting etc., complete.

Supplying and fabrication and placing in position MS/ RTS steel reinforcement for RCC works including labour for curing , bending, tying and fixing in position including cost of all materials, lead, lift, binding wire etc., complete.

Plastering with CM 1:3, 12mm thick for septic tank and plinths including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats by using Santex matt paint over a primer one coat of approved quality with suitable colour including cost of all materials, labour, lead, lift, curing etc., complete.

Labour charges for shifting of precast slab

Labour charges for Fabrication and fixing of Template for as per specification and drawing including cost of all materials labour lead lift etc., complete.

Labour charges for fixing of Template including aligining in position including labour lead lift etc., complete.

Fabrication and supply of grouting bolt for plinths as per specification and drawing including cost of all materials labour lead lift etc., complete.(20 mm Dia 1.2 m length)

Labour charges for fixing of grouting bolt including aligining in position including labour lead lift etc., complete.

Supply and Transport and fabrication and fixing of cable duct angle including aligining in position including labour lead lift etc., complete.

Supplying and fixing of MS rails in transformer plinth to required level and alignment as directed by the engineer incharge at site with all labour lead lift etc complete

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. - 40mm dia pipe

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. - 32mm dia pipe

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. - 25mm dia pipe

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. - 100 mm dia pipe

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. - 40 mm dia GM Gate valve

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. - 32 mm dia GM Gate valve

Supply and fixing of PVC Tap for earth pits

Supplying and filling of stone chips 12 mm to 20 mm HBG metal with required thickness all lead and lift including and all other T&P etc., complete.

Supplying and filling of stone dust with required thickness all lead and lift including and all other T&P etc., complete.

Supply of Iron & steel items including transportation - MS Joist 200X100mm

Supply of Iron & steel items including transportation - MS CHANNEL 125X65mm

Supply of Iron & steel items including transportation - MS CHANNEL 100X50mm

Supply of Iron & steel items including transportation - MS ANGLE 100x100x10mm

Supply of Iron & steel items including transportation - MS ANGLE 50X50X6mm

Supply of Iron & steel items including transportation - MS FLAT 65X10 (Eathmat only)

Supply of Iron & steel items including transportation - MS FLAT 50X8 ( Including L.section)

Supply of Iron & steel items including transportation - MS ROD 40mm (Including Earth spike)

Supply of Iron & steel items including transportation - MS/RTS ROD 20mm (Including I-bolt)

Supply of Iron & steel items including transportation - Chequred plate 6mm

Labour for transporting of iron & steel from chennai

BUS MATERIALS and POWER CONNECTORS - 4 Bolt Tension fitting for Zebra

BUS MATERIALS and POWER CONNECTORS - " T " Clamp for Zebra to Zebra

BUS MATERIALS and POWER CONNECTORS - " T " Clamp for Zebra to 2" B/B

BUS MATERIALS and POWER CONNECTORS - Switch end clamp for Zebra

BUS MATERIALS and POWER CONNECTORS - Switch end clamp for 2" Bus Bar

BUS MATERIALS and POWER CONNECTORS - PG Clamp for Zebra

BUS MATERIALS and POWER CONNECTORS - Free end Clamp for 2" Bus Bar

BUS MATERIALS and POWER CONNECTORS - Corona Bell for 2" Bus Bar

BUS MATERIALS and POWER CONNECTORS - L clamp for Zebra

Yard light & Other Items - Aluminium paint

Yard light & Other Items - Red oxide Paint

Yard light & Other Items - AC black paint

Yard light & Other Items - Yard light of 8.0 Mtr

Yard light & Other Items -- Yard light of 5.5 Mtr

Yard light & Other Items - LED lamp with fitting of 72 Watts

Labour for Fabrication of Heavy section without Lengthwise welded joints

Labour for Fabrication of Heavy section with Lengthwise welded joints

Labour for Fabrication of Light section

Labour for erection of Heavy section

Labour for erection of Light section

Labour for rust removing, cleaning painting of first primer coat of all sections using brush

Labour for rust removing, cleaning painting of first finishing coat of all sections using brush

Labour for painting of second finishing coat of all sections using brush

Labour for erection of 33/22/11 KV Measurement Transformer using without board's crane (one S Ph or 3 Ph unit ) including providing holes wherever required and fixing of junction box and as directed by the field engineer.

Labour for loading, transporting, unloading & Erection of 33/22 KV breaker without using board crane including providing gas pipe line and the cost of gada cloth, Teflon tape,gas filling and other consumables including support poles cutting, jointing,porviding holes and bending of pipes whereever required and as directed by the field engineer

Labour for erection of 33KV & 11KV Isolators without earth hand operated including the cost of consumables, lubricant, alignment, checking of operation and commissioning and as directed by the field engineer.

Labour for erection of 33KV & 11KV Isolators without earth hand operated including the cost of consumables, lubricant, alignment, checking of operation and commissioning and as directed by the field engineer. (LC WORK INVOLVED)

Labour for erection of LAS Station type single pole stack 33 KV /11KV

Labour for erection of Insulators single pole stack 22/11 KV

Labour for erection of 11/33 KV strung bus single zebra conductor (1 span = 3 runs)

Labour for erection of 11/33 KV strung bus single zebra conductor (1 span = 3 runs) (LC work involved)

Labour for providing Jumpers/Droppers

Labour for providing Jumpers/Droppers (LC work involved)

Labour for erection of 50 mm aluminium busbar

Erection of Simplex Panel including alignment and earthing as directed by field engineer

Labour for erection of cable in duct / trench - Upto 8 core

Labour for erection of cable and clamping in structures including fabricationof clamps and fixing at uniform intervals as directed by field Engineer - Upto 8 core

Labour for loading or unloading of fragile materials using board crane

Labour for loading of unloading nonfragile materials using board crane

Supply and provision of 450 mm mean dia 300 mm height ,36mm thick cement collar for identification as directed by the field engineer

Labour Charges for removing rust,primer coat first and second coat painting including bake side and writing details in M.S. Boards / including cost of enamel paint ( Dulex, Asian, Berger is preferred) and other consumables as directed by th field Engineer.

Fabrication, supply and fitting of CT / PT Junction box of size 400 W X 150 D X 300 H made out of 14 SWG (2mm) M.S. Sheet with 16 Nos. termination of stand type with two nuts and washers suitable for 4 Sqmm copper cable and 5 Nos. 1" gland wherever required as directed by the field engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements.

Labour charges for fabrication of bolt of required length out of 16 to 25 mm dia M.S. round / RTs rod including the cost of 2 Nos. M.S. Nuts as directed by field Engineer M.S round shall be supplied by department ( Eye Bolt )

Supply and provision of M5,M10,M12 & M16 (full thread ) G.I. Blt and Nuts of various length for erection of AB Switch and Insulators and any other purpose wherever necessary and as reuired and as directed by field Engineer

Supply and fixing of disconnected type terminal block suitable for C.T circuits in panel / box as required and as directed by field engineer

Supply and fixing of mounting channel suitable for CBIMS terminal block in Panel / Box as required and directed by the field Engineer.

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 15 mm

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 19 mm

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 25 mm

Labour for provision of cable end gland

Supply and termination of cable core ends including the cost of cable socket (lug) ferrules, Aluminium tag strops etc., as per drawing and as directed by the field engineer (No. of core ends in unit of 1000)

Supply and fixing of Godrej 6 lever navtol lock with triplecate keys for AB Switch and for any other purpose including the cost of ring and key token as directed by the field engineer

Supply and provision of 12 / 25 X 3 mm flexible braided copper for electrical connection including the cost of suitable copper lugs for criping of at both ends etc.as directed by field Engineer.

Lbour charges for writing details in finsihed surfaces boards including cost of enamul paint

Labour charges for earth falt paint (enamel paint)

Labour for erection of earthmat connection, earth electrode

Labour for fabrication of earh electrode with machinary and consumables

Labour for fabrication of earh spike with machinary and consumables

Providing 140/150mm dia bore to a depth of 9 mtrs for earth electrode and labour for fabrication and insertion and earth electrode in to the bore and filling with red soil, bertonite powder, coal powder & salt at the rations as tirected by field engineer and supply of identification board of size 300x150mm of 14swg and lettering and 12mm M.S. Rod to be fixed to the board.

Earth excavation HGS for Earth mat with refilling

Supply and erection of B-class GI pipe of Hendan/ down pipe for AB switch of 40mm

Dismantling of Jumper & dropper (LC work involved)

Dismantling of busbar of 50 mm (LC work involved)

Dismantling of 11 KV insulator of single pole stack (LC work involved)

Supply and fabrication of sand drum of size 580mm dia x420m height with conical cover made of tin sheet.

Labour charges for second thick coat of sub station structures & panels

Labour for loading, unloading of shifting of 33/22/11KV breaking without using board cone operation.

Labour for erection of yard light pole including laying of cable

Labour for erection of 72 Watts LED lamp fitting with fixture pipe

Manufacturing & supply of Yard light box of size 200WX200HX150D mm out of 18 SWG MS Sheet

Supply and fixing of Baklite HRC rewirable fuse carrier of 16 Amps

Supply and fixing of HRC fuse units without holder of reputed make of 10 Amps

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

MANICKAVASAGAM

C.PERIYASAMY

K DHINAKARAN