Composite tender for Construction of balance work of 60 Double Bedroom flats at Colvale

Amount

CIVIL

Clearing grass and removal of rubbish upto a distance of 50 M outside the periphery of the area.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. b) All types of Ordinary rock including all types of laterite rock, blasting prohibited

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. a) All kinds of soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in: b) All types of Ordinary rock including all types of laterite rock, blasting prohibited

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : (a) All kinds of soil

Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 mt. b. Hard soil

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40mm nominal size) excluding cost of centering, shuttering and finishing a) All works upto plinth level

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 river pebbles 40mm nominal size) excluding cost of centering, shuttering and finishing in: a) All works upto plinth level

Raking out joints in lime or cement mortar and reparing the surface for repainting or replastering including disposal of rubbish to the dumping ground within 50 mts. lead.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement: 4 coarse sand) in.: Foundation and basement.

Supplying and filling in plinth under floors, trenches including watering, ramming, consolidating and dressing complete. b) Moorum.

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement concrete by using 410kg of cement per cu.m. of concrete. All works upto floor V level. a) Foundation, footings, bases of columns etc. & mass concrete.

Centering and shuttering including, strutting, propping and removal of form for: i) Foundation, footings, bases for columns etc.

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement concrete by using 410kg of cement per cu.m. of concrete. Columns, pillars, posts, and struts up to floor five level

--------- do --------- up to floor six level

Centering & shuttering including Strutting, Propping & removal of forms for : columns, piers, Pillars, aburtments, Posts and struts ( square, rectangle, polygon in Plan) in all floors

Providing and laying in position machine batched concrete(BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement concrete by using 410kg of cement per cu.m. of concrete Lintels, beams, girders, bressumers & cantilevers upto floor five level.

--------- do ---------- upto floor six level.

Centering & shuttering including Strutting, Propping & removal of forms for : Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth in all floors.

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement concrete by using 410kg of cement per cu.m. of concrete. Suspended floors, roofs, landings shelves & their supports up to floor IV level.

--------- do ---------- up to floor five level.

---------- do ----------- up to floor six level.

Centering and shuttering including, strutting, propping etc, and removal of form for: suspended floors, roofs landings, shelves & their supports

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement concrete by using 410kg of cement per cu.m. of concrete. All works upto floor V level. : in sloping or battering surface (slabs, beams, louvers, etc.) i) Where inclination to the horizontal does not exceed 30 degree)

Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates. i) Where inclination to horizontal plane does not exceed 30 degree requiring shuttering only on the under side.

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement concrete by using 410kg of cement per cu.m. of concrete. l.Saircases (except spiral staircase) excluding landing upto floor five level

Centering and shuttering including, strutting, propping etc, and removal of form for: Staircases (except spiral staircase) excluding landing.

Providing and laying reinforced cement concrete work 1:2:4 (1 cement:2 coarse sand :4graded granitic or basaltic stone aggregate 20 mm. nominal size) in chajja not exceeding 15 cm. in thickness including finishing and plastering the exposed surfaces with cement mortar 1:3 (1 cement:3 fine sand) of thickness not exceeding 6mm. to give a smooth and even surface Throating & moulding, centering & shuttering complete but excluding cost of reinforcement up to floor five level

.--------- do -------- up to floor 6 level

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement concrete by using 410kg of cement per cu.m. of concrete. Walls (any thk) including pillasters, buttresses, plinth & string courses up to floor two level.

.-------- do -------- up to floor three level.

.-------- do -------- up to floor four level.

.------ do ------- up to floor 5 level.

.------ do ------- up to floor 6 level.

Centering & shuttering including Strutting, Propping & removal of forms for i) Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Providing TMT STEEL reinforcement bars of (SAIL, TATA, VIZAG GSW steel ltd.)(Confirming to IS 1786 of 1986 ) for RCC works (confirming to IS 1786 of 1986) including bending, binding and placing in position in all the floors along with the factory made precase concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member

Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in cm. 1 : 4 (1 cement : 4 coarse sand) in superstructure up to floor 2 level

.-------- do ------- in Floor 5 level

-------- do ------- in Floor 6 level

Half brick masonry in cement mortar 1:3 (1 cement: 3 coarse, sand) with bricks of class designation 40 kg/ sq. cm. a) Up to floor three level.

.-------- do ------- Up to floor four level.

.--------- do -------- Up to floor 5 level.

Brick work using common burnt building bricks in cement mortar 1:3 (1 cement : 3 coarse sand) with bricks of class designation 40 Kg/cm2(wire cut) bricks. In superstructure at floor VI level.

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed & fixed in position. b) Second class Indian Teak wood.

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed & fixed in position. d) Second class Matti wood.

6mm-cement plaster to ceiling 1:3 (1 cement: 3 fine sand).

12mm cement plaster 1:4 (1 cement : 4 fine sand)

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Extra for plastering exterior walls of height more than 10 metres from ground level for every additional height of 3 metres or part thereof

12mm-cement plaster 1:3 (1: cement : 3 fine sand).finished with floating coat of neat cement

Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.

Finishing fine with neeru over plaster.

Providing and laying vitrified floor tiles in different sizes of Johnsons, Somany, Kajaria ( thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS 15622 of approved make in colours and shades as specified laid on 20 mm thick. cement mortar 1:4 ( 1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigment etc. complete. b) 600 x 600 -- Light shades

Providing and Laying antiskid floor tiles 12x12 up to 16 x16 in of Johnsons, somany, Kajaria ( thickness to be specified by the manufacturer) of 1st quality confirming to IS 15622 of approved make in shades as specified laid on 20 mm thk. cement mortar 1:4 ( 1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete. a)Dark shades

Providing and fixing coloured ceramic tiles spartek or equivalent of 12 " x 12" (399x150 mm cut size) 6 mm thick in skirting and dados on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete.

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) a) 20 mm thick.

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. (b) 60 mm thick in Grey colour (M35 grade)

Providing and fixing m.s. grills of required pattern in wooden frames of windows etc. with M.S. flats or square or round bars with round headed bolts and nuts or by screws a) Plain grill

Providing and fixing 38mm thick paneled glazed or paneled and glazed shutters for doors, windows and clerestory windows including anodized aluminum butt hinges with necessary screws: Second class Indian teak wood.

Providing and fixing flush doors shutters commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering and vertical grains or cross bands and face veneers on the both other faces of shutters. c) 30 mm thick including anodized aluminium butt hinges with necessary screws:

Solid PVC door frame in prelaminated colour : Providing and fixing factory made polyvinyl chloride (PVC) Door Frame in Prelaminated colour of the size 50mm width, 47mm height with a wall thickness of 5mm(±0.25), made out of extruded 5mm(±0.25) thick PVC Sheet of Density 600 Kg /Cbm Manufactured by an ISO- 9000 certified Company , having pattam width of 50mm and thickness of 10mm providing weather seal Non-woven self adhesive gasket throughout the frame. All three frame lengths reinforced with 19mmx19mm M.S.square tube of 19 gauge. mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15mmx15mm M.S. square tube. The door frame shall be fixed to the wall using 8/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section. c) Figured glass

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows. c) Figured glass

Providing and making granitic kitchen platform counter with vertical pillars, shelves and top base of cuddapah. Top, side and borders of black granitic slabs with mouldings as required on edges with materials, labour etc. complete as directed and design given by the Engineer in charge

Providing & fixing stainless steel sink of size 20"x18"x8" for the kitchen platform of make Nirali or equivalent

Providing & fixing in position hand rails in staircase, landing and the like with 2" dia G.I. pipe (light class) resting on 25 mm (1") size M.S. square bars of clear height 90cms placed at 30 cm c/c including making necessary hold fast fixture (25 mm square bars 22 cm long) embeded in staircase concrete for resting the M.S. vertical square bars with holding etc. as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete (measurement will be made along the running length of hand rail).

Providing & fixing cement concrete bends

Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as Dulex/Asian paints/Sherwin Willians including applying one coat of cement primer and one coat of surface treatment etc. complete.

Varnishing (two or more coats) with copal varnish of approved brand and manufacture on new work including an under coat Bees waxing on wood work with local made wax polish in proportion of 2:1 5:1 0.5 (2 wax: 1.5 linseed oil: 1) b) With transparent wood filler.

Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for woodwork of approved brand & manufacture in all shade on new work to give an even shade.

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Providing and fixing chromium plated brass sliding door bolt with bolts, nuts and screws etc. complete. a) 300 x 16 mm

Providing and fixing anodised aluminium sliding door bolt anodised transparent or dyed required colour and shade with bolts, nuts and screws etc. complete: a) 300 x 16 mm

Providing and fixing bright finished brass door latch with necessary screws etc complete a) 300x 16 x 5 mm

Providing and fixing anodised aluminium flat latch b) 200 mm

Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete. c)150 x 10 mm

Providing and fixing aluminium tower bolt (barrel type) anodised or dyed to required colour or shade with screws etc. complete. d) 150 x 10 mm

Providing and fixing chromium plated brass handle with necessary screws etc. complete a) 125 mm

Providing and fixing aluminium handle anodised or dyed to required colour or shade with screws etc. complete. a) 125 mm

Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. b) 40 x 3 mm flat iron hold fast, 15 cm long

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead up to 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete (a) Sand

Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead. With cement mortar 1:4 (1 cement : 4 fine sand)

Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete.

Solid core PVC moulded door inprelaminated colour : Providing and fixing 35mm thick factory made Moulded door shutter - Wood free consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail . M. S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5mm(±0.25) thick moulded PVC sheet of Density 600 Kg/cbm manufactured by an ISO-9000 certified company . with 2, 4, 6 raised panel design in plain / prelam colours after routing the Moulded design on one side of the inside panel .5 mm(±0.25) plain / prelam PVC sheet to be pasted using solvent cement /cynoacrylate adhesive on other side of the Hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet baton (made by sticking 2Nos. foam PVC sheets of 5mm(±0.25) thickness using PVC solvent cement adhesive.Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam mouded PVC sheet of door .20 mm thick (5 mm x 4 nos.)thick PVC sheet to be given for lock provison at lock height . Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100mm*25mm*2mm and 50mm long steel screws drilled suitable to pass through both the walls of the M.S tube.other hardwares should be fixed with 25mm*8mm size steel screws etc, complete as per direction of Engineer-in-charge, manufacturer’s specification and drawing.

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow ection (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth up to 610mm) including all the accessories complete as per the directions of the Engineer in charge

SANITARY

Proving and fixing white vitreous china pedestal type (Eoropean type ) water closet with seat as lid, whth C.I. brass hinges and rubber fittings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3 enameled flush bad, 25 mm overflow pipe with specials and mosquito proof coupling of approved muncipal design complete, including cuting and making good the walls and floors where required. a) W.C. pan with white plastic seat and lid.

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. c) Flat back wash basin size 550 x 400mm with a pair of single 15 mm C.P. brass pillar taps.

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: a) 110 mm dia

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: b) For 75 mm dia pipe

Providing and fixing normal gauge ploythene pipes of approved quality complete with special flange compression type fitting of approved quality complete with special flange compression type fitting (of approved make including trenching and refilling etc. (external work), low density: a) 63 mm dia O.D.

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : a) 100 mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : b) 75 mm dia

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. a) 110 mm dia

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. b) 75 mm dia

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : a) 110 mm dia

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : b) 75 mm dia

Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes : a) 110 mm dia

Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes : b) 75 mm dia

Providing and fixing R.P.V.C. vent cowl: a) 110 mm dia

Providing and fixing R.P.V.C. vent cowl: b) 75 mm dia

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : a) 110 mm dia

Providing and fixing normal gauge ploythene pipes of 6 kg of approved quality complete with special flange compression type fitting of approved quality complete with special flange compression type fitting (of approved make including trenching and refilling etc. (external work), low density: 140 mm dia OD

Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design.

Providing and placing on terrace roof (6th floor roof) single piece moulded polythene water storage tank as per standard design 5000 lit. Capacity (make Sintex or equivalent).

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 110 mm dia

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 75 mm dia

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ; 4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ; 2 coarse sand ;4 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. Inside size 60 x 60 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ; 4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ; 2 coarse sand ;4 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. Inside size 90 x 80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg

WATER SUPPLY

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. : 15mm nominal outer dia pipes

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. : 20 mm nominal bore.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer. External work. 25 mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer. External work. 32 mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer. External work. 40 mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer. External work. 50 mm outer dia.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality:: 25 mm nominal bore.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality:: 32 mm nominal bore.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality:: 40 mm nominal bore.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality:: 50 mm nominal bore.

Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore.

Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore.

Providing and fixing NICKEL chrome plated copper alloy Fancy wall mixer with 3 IN 1 SYSTEM WITH 115MM long bend pipe for connection to over head shower Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 100mm diameter.

Providing and fixing PVC connection pipe with brass union 15mm nominal bore: 37.5 cm (15”) length.

Making chases upto 7.5x7.5 cm in walls including making good after housing G.I. pipe etc.

Supplying/installing/testing and commissioning 2 H.P. pump of with ISI mark of Kirloskar or equivalent make including 6 mt. green house pipe for section, gunmetal foot valve 50mm dia and including L & T starter with necessary clamps, colon MCB Ipn. Including 10”x12” teak wood board with one light point marking on the wall etc. complete and as per direction of Engineer-in-charge.

Providing and fixing water meter cover of size 60x40 cm including hold fast,locking arrangement for the box.

Providing and fixing NICKEL chrome plated copper alloy Fancy TELEPHONIC SHOWER 1.5M FLEXIBLE TUBE WITH SWINGING WALL HOOK Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing NICKEL chrome plated copper alloy Fancy sink mixer with U shape swinging casted spout Jaquar make or equivalent. Confirming to IS 8931;1993

Fixing water meter & stop cock in G.I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)

Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw

ELECTRICAL

Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC Conduit (medium) of appropriate size as required. (a) 2 x1.5 sq.mm +1 x1.5 sq.mm earthwire (20mm conduit).

Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC Conduit (medium) of appropriate size as required. (b) 2 x2.5 sq.mm+ 1 x2.5 sqmm earthwire (20mm Conduit)

Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC Conduit (medium) of appropriate size as required (c)2 x 4 sq.mm + 1 x4 sq.mm earthwire (20mm Conduit)

Supplying and fixing brass batten/angle holder including connections etc as required.

Supplying and fixing call bell/buzzer suitable for single phase 230V complete as required.Ding Dong Bell

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A Modular socket outlet and 5/6 A modular switch connection painting etc. as required.Cat A

Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. a)5/6 A Switch Cat A.

Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. d)3 pin 5/6 A socket outlet Cat A

Supplying and fixing suitable size modular GI Box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A Modular socket outlet and 15/16A Modular switch connection painting as required.Cat A

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit (medium) with 2 way modular switch, modular plates, suitable size modular GI box of specified category and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. as required.With Cat A Modular Accessories.

Wiring for light point/fan point/exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit (medium) with 2 way modular switch, modular plates, suitable size modular GI box of specified category and earthing the point with 1.5 sq.mm FRLS PVC insulated and copper conductor single core cable etc. as required.Group C-With Cat A Modular Accessories.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.Cat A

Wiring for group controlled light point/fan point/exhaust fan point/call bell,point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit (medium) and earthing the point with 1.5 sq.mmFR PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing of following size of PVC Conduit along with accessories in surface (medium)/recessed (heavy) including cutting the wall and making good the same in case of recessed conduit as required. (b)25mm

Supplying and drawing/fixing indoor type 0.5 Sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wall or in existing surface / recessed steel/PVC conduit having following pair(s), complete as required. (a)2 pair

Supplying and drawing of CO-axial TV cable of required grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC shealth in existing surface/recessed steel/PVC conduit of appropriate size including connection etc, complete as required. (b)RG-6.

Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. (f)Telephone socket outlet Cat A.

Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. (g)TV Antenna socket outlet Cat A.

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as require (a)SP, Cat A

Supplying and fixing following way TPN sheet steel, double door, Horizontal type, MCB distribution board 415V on surface/recess complete with tinned copper bushar neutral bushar earth bar dinnbar detachable gland plate interconnections phosphotised and powder painted including earthing etc as required (but without MCB/RCCB/Isolator) (a) 6 way (8+18), double door, Horizontal type Cat A,

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (d)TP, Cat A

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e)TPN, Cat A

Supply installation, testing and commissioning of electronic, type three phase energy meter (KWh), 4 wire ISI,marked, in polycarbonate or sgheet steel body (base mounting type) with counter display/LCD display, with ELT, in Class 1.0.50 Hz, 240V.ACduly tested by MRT along with test Certificates, complete as required of following capacity of make L& T only. (b) 10 to 40A

Supply of 4 core armoured PVC insulated PVC/XLPE seathed copper conductor cable of I.I KV grade with ISI mark conforming to IS;1554(PartI,157098(Part I)with latest amendments of following size. (5) 4 core 4 sq.mm

Laying of one number PVC insulated and PVC sheathed/ XLPE power cabel of 1.1 Kv grade of size not exceeding 35 sqmm on surface ,etc. complete as required.

Supplying and making cable end terminations with brass compression and copper lugs for following size of 4 Core PVC insulated PVC seathed/XPLE aluminum conductor cable of 1.1 KV grade, complete as required. (4)4x10 Sq.mm

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/cable as required

Supply of 31/2 core armoured PVC/XLPE insulated, PVC seathed aluminum conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I) IS:7098 (Part-I) with latest amendments of following size. (9) 31/2 Core 240 sq.mm

Laying of one number PVC insulated and PVC seathed/XPLE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge , sand cushioning with screened sand bed of 20mm thick, protective covering with bricks placed breadth-wise on top of cable all over the run (the brick protection shall cover the cable and protect atleast 5 cm over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.In rocky strata

Laying of one number PVC Insulated and PVC seathed /XLPE power of 1.1 KV grade of Size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface, etc complete as required

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc complete as required.

Supplying and making cable and terminations with brass compression gland and copper lugs for following size of 31/2 Core PVC insulated PVC seathed/XPLE aluminium conductor cable of 1.1KV grade, complete as required. (10) 31/2 x240 Sq.mm

Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth upto 90cms below road/ ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Supplying and laying 25mn x5mn copper strip in 40 mm dia GI pipe from earth electrode as required

Supplying and laying 8 SWG copper wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required.

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately). b) in rocky strata.

Extra for using salt and charcoal for GI or copper plate earth electrode as required. (96 kg of charcoal and 5 kg of salt

Design-supply installation, testing and commissioning of IP54Main L:T Panel indoor type, Fully Compartmentalized Floor Mounted with M.S Angle frame 75x40x5 mm of channel duly painted, fabricated of 14swg CRCA Sheets completely derusted chemically treated, phosphetised, enameled and powder coated with shade suggested by client and basically having the following items Incomer:- with 4P250 A MCCB 35KA with thermal Release for O/L, S/C, Extended rotary handle,…. 1 No. in a seleable compartment with indication lights, 6A SP MCBs spreader Terminals 4P, Digital load manager (VIFPE). Aluminum Bus bar Chamber 250 A4P AL250A Incomer & common Bus

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit (medium) of approved size as required. (J) 4 X 6 sq.mm + 2 x 6 sq.mm earthwire(32mm conduit)

Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Department.

ROADS & PATHWAYS

Construction of embankment with approved material obtained from borrowpits with all lifts and leads transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300-2 as per MORTH specification 305

Supplying and stacking laterite stones of size 150-200 mm (contractor's stone) for soling at site.

Laying stone soling including packing with smaller stones and consolidation with road roller including spreading, watering and consolidating of binding material murrum or earth etc. (payment to be made for quantity of only soling stone used excluding binding material)

Supplying and stacking of (Contractor's material) murrum at site, having P.I. Value not more than 6

Providing and laying 50 mm consolidated thickness) full grout using granitic or basaltic stone of specified grading at 6.00 cu. m.per 100 sq.m. grouting with hot bitumen straight run bitumen (or with such bituminous material of grade and type as specified by the Engineer In Charge ) at 5.0 kg. per sq.m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m. including providing and laying seal coat sealing the voids in a bituminous surface laid with F.E. loader with 1 cu.m. bucket capacity to the specified levels, grade and cross fall using type A seal coat with 0.98 kg/sq.m. of bitumen of grade as per MORTH specifications clause 513.

Raising side shoulders with hard murrum including spreading watering and consolidation murrum from borrow pit.

Clearing jungle including uprooting of rank vegetation grass bush wood trees and sapling of girth upto 30 cm. measured at a height of 1 m. above ground level & removal of rubbish upto a distance of 50 m. outside the periphery of the area cleared (If however only grass is met with the area will be measured and paid for under item 4001)

Earthwork in excavation by mechanical means ( hydraulic excavator) /manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.mt. on plan ) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead of 50m. All types of soil

Providing and laying cement concrete 1:3:6 ( 1 Cement :3 Coarse sand :6 graded granitic or basaltic stone aggregate 40 mm nominal size) excluding cost of centering, shuttering and finishing in All works upto plinth level.

Providing and laying cement concrete 1:3:6 (1 Cement :3 Coarse sand :6 graded granitic or basaltic stone aggregate 40 mm nominal size) excluding cost of centering, shuttering and finishing in: In retaining walls,return walls, (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks,anchor blocks, plain window sills, fillets etc. upto floor five level.

12 mm cement plaster 1:4 (1 cement :4 fine sand)

Providing at store or site of work including railwazfreight,carting loading and unloading etc. for non-pressure R.C.C. pipes with collar joint of NP 2 pipe etc 400 mm dia pipe

Laying and fixing with collars light duty non pressure NP2 class R.C.C. pipes with cement mortar in proportion 1:2 (1 cement :2 fine sand ) in joints including cost of joining material etc. complete 400 mm dia pipe

Supplying and filling in plinth under floors trenches including watering ramming consolidating, dressing complete. Sand.

Refilling the pipeline/foundation trenches plinth sides,foundations etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Supplying and fixing of precast RCC slabs (factory made, the factory should be ISO certified and registered under the Directorate of Industries,Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10 mm bars and PVC cups including cost of reinforcement, certificate from manufacture shall be produced indicating grade of concrete and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge

Size 900 X 400 X150 mm with steel reinforcement not less than 7.0 kgs per unit - 30 T capacity

Centering and shuttering including struttings, propping etc. and removal of formwork for: b) Vertical surfaces such as retaining walls,return walls(any thickness) including attached pilasters,buttresses,plinth and string courses,fillets etc.

Rubble packing with hard laterite stones under floors including watering ramming and consolidating etc in pipline trenches and other foundations complete.

Steel work welded(SAIL,TATA,VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) in buildup sections trusses & framed work including cutting, hoisting,fixing in position and applying priming coat of red lead paints(in tees,angles flats and channels)

Painting 2 or more coats (excluding priming coat) with ordinary ready mixed paint of approved brand & manufacture in all shades except white or green on new work to give an even shade.

35 KLD STP

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.

All types of Ordinary rock including all types of laterite rock, blasting prohibited

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.Extra for additional depth of 1.5 m or part thereof in :

All types of laterite rocks and hard rocks

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level

Centering & shuttering including Strutting, Propping & removal of forms for :Foundations, Footings, Bases for columns

Centering & shuttering including Strutting, Propping & removal of forms for : Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)

Centering & shuttering including Strutting, Propping & removal of forms for : Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, bressumers and Lintels plinth beams not exceeding 1m in depth

Centering & shuttering including Strutting, Propping & removal of forms for :Suspended floors, roofs landings, shelves & their supports

Centering & shuttering including Strutting, Propping & removal of forms for :Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Providing and laying in position ready mixed concrete (RMC) with usage of ordinary portland cement manufactured in fully automatic batching plant and transported to site if work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended proportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level M-25grade of concrete

Providing High yield strength steel reinforcement bar (HYSD)/TMT steel reinforcement bar from secondary producers (Confirming to IS 1786 of 1986) for RCC work including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Laterite masonry in neatly dressed stones for 20 cms thick masonry walls in cm. 1 : 4 (1 cement : 4 coarse sand) in all sizes in superstructure from floor I level upto floor V level.

6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)

12mm cement plaster 1:4 (1 cement : 4 coarse sand)

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 (1 cement: 3 fine sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.

Providing and fixing anodized alluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol. I & II including all taxes, transportation, scaffolding and handing etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18mm series shutters section.Extra for powder coating with pure polyster powder of shade of required colour on the aluminium section. b)figured glass

Providing FRP door shutters 35mm thick with frame size in clear opening of 0.75x2.10m hinges and screws complete.

Providing and fixing MS sliding door bolt bright finished or and black enamelled with nuts and screwsb etc.complete 300 x 16 mm

Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Neat Cement punning

Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by screws b) Ornamental grill

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade including applying one coat of cement primer of approv0ed brand and manufacture on wall surface.

Painting three or more coats with acrylic exterior paint of approved brand and manufacture (such as Dulex/Asian paints/Sherwin willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2 coarse sand ;3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cement ;1 1/2 coarse sand :3 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).

Supplying and fixing C.I. cover without frame for manholes: 445x610 mm rectangular C.I. cover (light duty) weight of cover to be not less than 23 kg.

WATER SUPPLY

Supplying at store or site of work including loading, unloading and stacking at site PVC (RING FIT) pipes with elastomeric sealing ring (one per pipe) and with rubber ring socket, conforming to to IS:4985-2000,and bearing ISI mark Class 6kg/sq.cm 110 mm OD

Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for P.V.C / H.D.P.E complete in all respects as per the direction of the engineer incharge 110 mm OD

Jointing of RING FIT PVC pipes by cleaning the pipes and hydraulic testing of joints etc. complete,as directed by the engineer incharge 110 mm OD

Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete NP2 Class 200 mm dia.

Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. 250 mm ND

ELECTRICAL

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit(medium) of appropriate size as required

2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit)

Supplying and fixing brass batten/ angle holder including connections etc as required.

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required

(a) 5/6 A switch Cat A

(d) 3 pin 5/6 A socket outlet Cat A

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as reqd.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit (medium)with 2 way modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as reqd.

with Cat A Modular accessories

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit(medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc as reqd.

(c) Group C -- with Cat A Modular Accessories

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator).

c) 6 way (8+18), double door, Horizontal type Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.

e) TPN, Cat A (32A)

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

4) 4 Core 6 sq.mm

GSR/Elect/2015/11005/3 Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

(3) 31/2 Core 50 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.

(3) 4 x 6 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.

3) 3 1/2 x 50 Sq. mm

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge. The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately). '

In rocky strata

Extra for using salt and charcoal for GI or copper plate earth electrode as required

Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Deaprtment.

BAR SCREEN MSEP:- Supplying, installing, testing and commissioning of bar screen so as to remove the large sized particle present in the sewage water associated with set of guide angles in MS flat of 6.0 mm thick and 25mm wide kept inclined at 45 degree to the horizontal at 10mm c/c with one no. hand rack in MS bars shall be provided to cover the width of the screen chamber with a racking arm for manual operation

RAW SEWAGE PUMPS:- Supplying, installing, testing and commissioning of 2 Nos.(One working + one standby) submersible type raw sewage pumps to pump sewage from equalization sump to aeration tank at 2.0 cu.m / hr flow rate. The pump shall be installed with requisite NRV, valves, manifolds and return water line to the equalization tank to adjust flow. The pump shall be suitable for the following requirements: a) Flow rate -2 cu.m/hr b) Head - 3 -7 mtr.

AIR BLOWER :- Supplying, installing, testing and commissioning of 2 Nos.(One working + one standby) Twin Lobe design type air blower compete with motors, pulleys, one piece rigid CI casing and side plates , silencer, base plate, Anti-friction bearings, Rotary oil sealing’s having horizontal configuration.

The blower shall be suitable for the following :

Flow rate of each blower- 50 cu.m/hr

Flow pressure-0.40 kg/sq.m

Earthing for motors to be provided

The rate quoted shall be inclusive of:

1 no. pressure gauge 4” dial with isolation valve tee and fittings.

Everest / Alpha make Twin Lobe roots type Air blower of 50 cum/hr. at 0.40 kg/sq. cm capacity comprising of common base frame, suction filter, suction silencer, non return V belt, guard, drive and driven pulleys, pressure gauge, inter connection piping, discharge silencer, anti vibration pads including motor of make Crompton/Siemens

Motor for air blower to be provided

2 nos. of Wafer type Non return valve / slim seal flap type check valve with CI body and cast steel disc tested to PN - 10 kg / sq.cm pressure including a set of GI Flange as per BS-10 table 1 including bolts, nuts, GI washers and neoprene rubber gaskets complete etc.

GI manifold of suitable dia. on delivery side finished neatly with hot dip galvanizing to 100 microns with flanged end on either sides and collar provision for connectivity of above mentioned valves.

COARSE BUBBLE DIFFUSERS:- Supplying, installing, testing and commissioning of coarse bubble diffuser Disc Type

FINE PORE DIFFUSERS :- Supplying, installing, testing and commissioning of fine bubble diffusers 2000mm MOC, EPDM of make, Raubioflex/ OTT/ESI/SSI

MBBR MEDIA:- Supplying, installing, testing and commissioning of MBBR Media consisting of the following:- a) Type: Cylindrical type b)Surface area : 400 M2/M3 c) MOC : PP d) Make:-Marvellous

TUBE SETTLER MEDIA:- Supply of PVC Square shape tube media with angle of inclination 60 degree. a)Type: – Square b)MOC : PVC c) ) Make :-Marvellous

SLUDGE PUMPS:- Supplying, installing, testing and commissioning of 2 Nos.(One working + one standby) submersible type raw sewage pumps to pump sewage from equalization sump to aeration tank at 2.0 cu.m / hr flow rate. The pump shall be installed with requisite NRV, valves, manifolds and return water line to the equalization tank to adjust flow. a) Flow rate -3 cu.m/hr b) Head – 3M -7 mtr

CHLORINE DOSER:- Supplying, installing, testing and commissioning of dosing unit with automatically operated dosing pump. The unit shall comprise of the following:-

One no. single moulded LLDPE cylindrical type chemical solution tank of 100 litres capacity having detachable lids with moulded inserts for mounting of pumps and stirrer.

One no. Electronic diaphragm type positive displacement pump of E Dose make, for chemical dosing with plastic head. The electronic pump shall be operated on 220V single phase supply and shall be mounted directly on the tank top.

Complete set of pipes, valves and fittings ,foot valve magnetic float switch to trip the dosing pump at low level of chemical in the tank.

The free chlorine content in the filtered water shall not exceed 0.5 PPM.

Dosing system to work in tandem with filtration system for on/off operation i.e. should only work when filtration through PSF &ACC is on.

The pump shall be suitable for the following requirements:-

Min actuating pressure – 2 kg/ sq. cm

Max. Working pressure - 6kg/ sq. cm

Max. Temperature – 50 degree Centigrade

Dosing flow range – 6lph

FILTER FEED PUMP:- Supplying, installing, testing and commissioning of 2 Nos. submersible open well pumps (1W+15) for pumping clarified water through filtration system. The pump shall be suitable for the following requirements:- a)Flow rate – 3cu.m/hr b)Head – 28 mtr. The pumps operation should be controlled through float switch in the intermediate tank With necessary valves, NRV & pressure gauge etc.

SAND PRESSURE FILTER:- Supplying, installing, testing and commissioning of sand pressure filter for filtration of suspended impurities in clarified water. The filter shall be suitable for 3 Cu.m / hr flow rate and designed to remove suspended particles / impurity in treated sewage water.

The SPF shall be designed for a specific velocity of 15 m3 / hr/sq.m area

The sand pressure filter unit shall comply with the following technical requirements:-

Flow rate – 3cu.m/hr

MOC of Filter – FRP 1665 Make ACPL/Pentair

Back wash duration – 15 minutes

Valves:- Multiport valve top mounted 40nb

Filtering Media – Pebbles / Sand

Pressure gauge shall be provided at inlet and out let of sand Pressure filter.

Initial charge of underbed and multigrade filtering media as required.

Complete set of valves, pressure gauge and piping at inlet, outlet backwash and drain out point etc. with schedule 40 white pipes (make :-Finolex/ Astral

ACTIVATED CARBON FILTER:- Supplying, installing, testing and commissioning of sand pressure filter for filtration of suspended impurities in clarified water. The filter shall be suitable for 3 Cu.m / hr flow rate and designed to remove suspended particles / impurity in treated sewage water.

The SPF shall be designed for a specific velocity of 15 m3 / hr/sq.m area

The sand pressure filter unit shall comply with the following technical requirements:-

Flow rate – 3cu.m/hr

MOC of Filter – FRP

Back wash duration – 15 minutes

Valves:- Multiport valve top mounted 40nb

Filtering Media – Activated Carbon With supporting media

Pressure gauge shall be provided at inlet and out let of sand Pressure filter.

Initial charge of underbed and activated carbon media as required.

Complete set of valves, pressure gauge and piping at inlet, outlet backwash and drain out point etc. with schedule 40 white pipes (make :-Finolex/ Astral)

Make –Faraday/Ozone Engineer

ELECTRO MAGNETIC FLOW METER:- Supplying, installing, testing and commissioning of 1 No. Make –Aster/Microset

MCC PANEL:- Supply, fabrication, erection and commissioning of combined/ common motor control centre panel (MCCP).The panel shall be of “noncompartmentalised” type.The MCC shall be sheet steel fabricated, finished with powder coating of approved colour, wall mounted with incoming MCB, Individual MCB for each blower/pump, starter relays , over load, with time delay sequence for air blowers and single phase preventer. The panel shall have Voltmeter, Ammeter and indicating lamps on the incoming side only indicating lamps for the pumps on outgoing side to indicate the operation mode. The panel shall be complete in all respect and prior to the supply, fabrication drawing shall be submitted for consultants approval, the cost should include necessary cabling between all pumps and panel.

SLUDGE DEWATERING SYSTEM:- Supplying, installing, testing and commissioning of Basket type Centrifuge feed pump of 3m3/hr @ 10M Head to feed slurry with standard base frame of MOC CI- one No. with necessary Earthing& accessories required in complete to make the system functional. a)Quantity – 1 no. b) Make – BA engg/Equiv. c)Model – as per Manufacturer d)Type – Manual Hydraulic closing e)MOC – SS 304 f)Size – 8”

The quoted rates shall include plant and piping works for the STP consists of interconnecting piping,fittings,valves within the battery limit of the sewage Treatment Plant MOC of the piping shall be UPVC,Air line will be MS'B" class

Operation of STP for a period of 5 years

Maintenance of STP for a period of 5 years ( with 1st year free)

Supplying, installing, testing and commissioning of Composting system for processing kitchen waste for 2 BHK 60 Nos.System should contain combination of Shredder with drum composting Tumbler. Fully automatic having no coil heater assembly accepted by the environment clearance board. 75 KG Capacity.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. : 15mm nominal outer dia pipes

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. : 20 mm nominal bore.

BLDG GSR / 2019 / 15768b / 214 Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer. External work. 25 mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer. External work. 32 mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer. External work. 40 mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer. External work. 50 mm outer dia.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality::25 mm nominal bore.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality::32 mm nominal bore.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality::40 mm nominal bore.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality::50 mm nominal bore.

Making chases upto 7.5x7.5 cm in walls including making good after housing G.I. pipe etc.

Supplying/installing/testing and commissioning 2 H.P. pump of with ISI mark of Kirloskar or equivalent make including 6 mt. green house pipe for section, gunmetal foot valve 50mm dia and including L & T starter with necessary clamps, colon MCB Ipn. Including 10”x12” teak wood board with one light point marking on the wall etc. complete and as per direction of Engineer-in-charge.

Providing and fixing water meter cover of size 60x40 cm including hold fast,locking arrangement for the box.

Fixing water meter & stop cock in G.I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)

Providing and fixing normal gauge ploythene pipes of approved quality complete with special flange compression type fitting of approved quality complete with special flange compression type fitting (of approved make including trenching and refilling etc. (external work), low density: a) 63 mm dia O.D.

COMPOUND WALL

Clearing jungle including uprooting of rank vegetation grass bush wood trees and sapling of girth upto 30 cm. measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 mt. outside the periphery of the area cleared. (if however, only grass is met with the area will be measured and paid for under item 4001).

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. a) All kinds of soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. b)All types of Ordinary rock including all types of laterite rock, blasting prohibited

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 river pebbles 40mm nominal size) excluding cost of centering, shuttering and finishing in: a All works upto plinth level

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 5 (1 cement : 5 coarse sand) in foundation and basement.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 5 (1 cement : 5 coarse sand) in foundation and basement. Extra for labour in well lining cornices coping, etc

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 5 (1 cement : 5 coarse sand) in foundation and basement. Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level

Centering and shuttering including struttings, propping etc. and removal of formwork for : a)Foundations, footings, bases for columns and mass concrete.

Centering and shuttering including struttings, propping etc. and removal of formwork for : c)Columns, Pillars ,piers ,abutments, posts and strut, square, rectangular, polygon in plan. etc.

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement concrete by using 410kg of cement per cu.m. of concrete. All works upto floor V level. a) Foundation, footings, bases of columns etc. & mass concrete.

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement concrete by using 410kg of cement per cu.m. of concrete. Columns, pillars, posts, and struts up to floor five level

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete

Providing Pre-cast cement concrete jali 1:2:4 (1 cement: 2 coarse sand: 4 stone aggreate 6mm nominal size) reinforced with 1.6mm dia mild steel wire including centering and shuttering, roughening, cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine snad) all complete excluding plastering of the jambs, sills and soffits i) 50mm thick

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Applying one coat of cement primer of approved brand and manufacture on wall surface.

Finishing wall with waterproofing cement paint of approved brand and manufacture and of required shade on new work (three or more coats) to give an even shade.

Supplying and fixing of precast RCC slabs (factory made, the factory should be ISO certified and registered under the Directorate of Industries,Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10 mm bars and PVC cups including cost of reinforcement, certificate from manufacture shall be produced indicating grade of concrete and minimum content of steel in theproduct along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge

Size 900 X 400 X150 mm with steel reinforcement not less than 7.0 kgs per unit - 30 T capacity

Refilling the pipeline/foundation trenches plinth sides,foundations etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

LETTERING/NUMBERING

Lettering with black Japan paint of approved brand and manufacture

EXTERNAL PIPELINE

Earthwork in excavation by mechanical means (hydraulic excavator) in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. B) All types of Ordinary rock including all types of laterite rock, blasting prohibited

Supplying at store or site of work Rigid PVC (SEL FIT) pipes for public water supply including Railway freight, carting, loading and unloading, stacking, transit insurance etc. complete, Confirming to IS: 4985-2000, and bearing ISI mark, Class 10 kg/cm2. Outer Dia 110mm.

Supply of rigid PVC fittings conforming to IS: 7834-1975 designed for precision and accuracy so as to join PVC pipes and other specials including railway freight, carting, loading and unloading and stacking etc. complete.

Elbow Outer dia 110mm

End Cap (Plain) dia 110 mm

Tee 110mm outer dia

Female Threaded Adaptor outer dia 50mm

Male Threaded Adaptor outer dia 50mm

Service saddle 63x20mm dia

Cutting the bituminous road for laying the pipeline in trenches for awidth of 0.6 m including labour, tools etc. and disposing the excavated excess material from the trench to a distance of 1000 meters, including making level the trench surface by utilising the serviciable material to the level of the top surface of road, by compacting, watering ramming with rolling with road roller after completion of laying of pipe and refilling the trenches etc. complete as per the direction of engineer incharge. By manual means. Rural roads

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. galvanized mild steel continuous weld tubes conforming to IS:1239 (part I) 1975, with latest amendments, screwed at both the ends as per IS: 554-pipe threads, one end fitted with socket other end with plastic protection ring at random length 4-7 metres. Nominal Diameter 50 mm. Class C

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality: 50 mm nominal bore.

Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for P.V.C/ H.D.P.E complete in all respects as per the direction of the engineer incharge 110mm outer dia.

Conveying carefully from stack at sites 250m from both the sides rolling and lowering into trenches, laying, jointing G.I. Pipes with G.I. Fittings of sizes given below true to line and level including fixing sockets, elbows tees bends, gland packing and other fittings with cutting and threading as required including hydraulic testing. etc complete. 50 mm Nominal dia.

Jointing of rigid/ SEL FIT PVC pipes by cleaning the pipe with solvent cement including cost of solvent cement and hydraulic testing of joints etc. complete as per IS:7634-1975 Part 3, including hydralic testing of joints as directed by the engineer incharge. Outer diameter 110 mm.

Supplying at store or at site of work cast iron specials for mechanical and push on flexible joints as per IS:13382-1992 including Sealing rubber gaskets (NR), CI compression glands and coated MS Nuts bolts.

All Sockets TEE Nominal dia in mm 100x100x100

Double Socket Branch Flange Tee Nominal dia 100x100x100 mm

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. IVC/KIRLOSKER/FOURESS/AVK/SIGMAFLOW/AVISHKAR brand Cast iron double flanged manually operated Sluice Valve generally conforming to IS: 14846-2000 having body, door, dome, gland in graded cast iron to IS:210 Gr. FG 200, four faces and spindle nut of leaded tin bronze to IS: 318 Gr. LTB 2, inside screw of non-rising stainless steel AISI 410, spindle, Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350 mm and above will be fitted with BTB and spur gear box. and back seat bush.) TYPE P.N. 1.0 (Class A)100 mm nominal dia.

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C.I. single large orifice air valve similar to Glen field fig H4 or similar with steel ferrule at inlet screwed suitable to working pressure of 10kg/sq.cm. (Class B) 25 dia in mm.

Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I 125 mm nominal dia.

Fixing C.I. Single large orifice air valve of similar make with bronze ferrule at inlet screwed suitable to working pressure of 15kg/sq. cm for 12 mm to 20 mm and 10kg/sq. cm for 25 mm to 50mm, complete, as directed by the engineer incharge, of following sizes. 25 mm nominal dia.

Construction of masonry chamber 60x60x75 cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar 1:4(1 cement : 4 coarse sand) for sluice valves 50 to 80 mm with necessary excavation, foundation concrete 1:5:10 (1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing. (rate is inclusive of rate earthwork excavation, cost of surface cover and all other materials and labour as per details below) with C.I. Surface box 100 mm top dia 160 mm bottom dia and 160 mm deep of wt 15kg inside with chain lid in 120 mm thick RCC slab cover in cement concrete 1:2:4 (1 cement: 2 coarse sand :4 graded stone ballast 20 mm nominal size).

Construction of masonry chamber 90x90x100 cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar 1:4(1 cement : 4 coarse sand) for sluice valve of sizes 100 mm, 120 mm 150 mm and 200 mm dia with necessary excavation, foundation concrete 1:5:10 (1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing. (rate is inclusive of rate earthwork excavation, cost of surface cover and all other materials and labour as per details below) with C.I. Surface box 100 mm top dia 160 mm bottom dia and 160 mm deep of wt 15kg inside with chain lid in 120 mm thick RCC slab cover in cement concrete 1:2:4 (1 cement: 2 coarse sand :4 graded stone ballast 20 mm nominal size).

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All works upto plinth level.

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Making connection to individual 15 mm/20mm/25mm GI/ OD Blue PVC pipeline with existing distribution line of any diameter with saddle piece/ and necessary pipe and specials required suitable to the distribution line with road cutting trenching refilling the same including the cost of labour and accessories etc. complete. as per the direction of engineer-in-charge.

Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing etc complete. a) sand

Supply of malleable G.I fittings conforming to IS:1879-1987 with amendments no.1 to 7 galvanized with 610 gm/m2 as per IS:4759-1996 with latest amendments

Reducing socket 65X50 mm Nominal diameter

Supply of malleable G.I fittings conforming to IS:1879-1987 with amendments no.1 to 7 galvanized with 610 gm/m2 as per IS:4759-1996 with latest amendments

Elbow 50 mm Nominal diameter

Supply of malleable G.I fittings conforming to IS:1879-1987 with amendments no.1 to 7 galvanized with 610 gm/m2 as per IS:4759-1996 with latest amendments

Socket 50 mm Nominal diameter

Supply of malleable G.I fittings conforming to IS:1879-1987 with amendments no.1 to 7 galvanized with 610 1987 with amendments no.1 to 7 galvanized with 610 gm/m2 as per IS:4759-1996 with latest amendments

Union 50 mm Nominal diameter

Supply of malleable G.I fittings conforming to IS:1879- 1987 with amendments no.1 to 7 galvanized with 610 gm/m2 as per IS:4759-1996 with latest amendments

Hexagonal Nipples 50 mm Nominal diameter

Providing and fixing non-return valve of approved quality :

50 mm Nominal bore

Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work).

50 mm Nominal bore

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :

50 mm Nominal bore

ELECTRICAL WORKS

Supply & Erection of 11 Mts long RCC pole

Supply & Erection of 11KV GOAB switch 200 A, 3 Pole DP GOAB Switch

Supply & Erection of 11KV 200 A H.G Fuse unit

Supply & Erection of 9kv, 5KA lightening Arrestor pole mounted.

Supply & Erection of HDGI Struture material for DP

Supply & Erection of 200KVA 11KV/0.4KV Distribution transformer level II losses,Aluminum winding with metallic terminal connectors ,Energy efficency level II as per IS:1180(Part-I):2014

Supply & Erection of LT/11KV Stay set complete 11Mts long RCC pole

Supply & Erection of 11 KV Cut point channel 1.3 Mts long with clamps & nut bolt for 11 mtr RCC pole

Supply & Erection of V-Shape X arm with clamps & nut bolt for 11mtr RCC pole

Supply & Erection of guard X arm with clamps & nut bolt for 11mtr RCC pole

Supply & Erection of 11 KV disc Insuators 70KN

Supply & Erection of Metal Parts for 11KV disc insulator 70KN 3 bolted type

Supply & Erection of Top fitting X arm Channel with clamps & nut bolt for 11mtr RCC pole

Supply & Erection of 11KV Pin insulator with GI pin

Supply & Erection of ACSR Weasel for , DP earthing and line stringing for guarding

Supply, providing of earthing with HDG pipe type earthing pipe 6ft x 40 mm B class including charcoal, salt, etc.

Supply & Providing of XPLE insulated single core unarmoured cable 50 mm2 for DP earthing.

Suppply & Erection of MS distribution box with ICTPN 400 amps, bus bar made out of aluminium strips 40x10mm, other accessories, 3 ph. Energy meter, suitable CTs of 400/5 amps & Kit Kat fuses 200 A each for 4 feeder arrangement for 100 KVA distribution T/C

Supply & Providing PVC 1.1KV Armored single core unarmoured cable 185 mm²

Supply & Providing XLPE armoured 31/2 Cx120 Sq.mm PVC 1.1 KV grade

Supply & Erection of 11 KV enamelled danger board 250mm*200mm

Supply & Erection of Al. Crimping lugs 185 sq.mm

Supply & Erection of Al. Crimping lugs 120 sq.mm

Supply & Erection of Al. Crimping lugs 95 sq.mm

Al. Crimping lugs 50 sq.mm

Supply & Erection of HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 11 mts long RCC pole

Supply & Erection of HDG L.T.2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for11mts long RCC pole

Supply & Erection of HDG L.T. Shackle insulator with metal parts

Supply & Erection of HDG L.T. Pin insulator with GI pin

Supply & Stringing of ANT Conductor

Supply & Stringing of GNAT Conductor

Supply & Stringing of Weasel Conductor

Removing of HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 7.5 mts long RCC pole

Removing of HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 7.5 mts long RCC pole

Removing of LT Shackle insulator with metal parts

Remvoing & Re-stringing of ANT Conductor

Remvoing & Re-stringing of GNAT Conductor

Remvoing & Re-stringing of RACCON Conductor

Removing of 7.5 Mtr RCC pole

Excavation of trench of size 0.3 x 0.9 x mtr mts in any type odf soil including of opening of road etc for laying of cable of size 3 ½ core120 Sqmm

Filling of available excavated earth (excluding rock/stones) in trench, plinth, sides, foundations etc. in layer not exceeding 0.2mts. Depth consolidating each deposited layer by ramming and watering lead up to 95mts. (0.7x0.3xmtr)

Sand for cushioning of the cables in the trench.

Supply and laying of RCC protective cover of size 600 mm long X 250 mm width and 50 mm thick capable of bearing load of 135kg and covered with earth/sand upto depth of 1.5 mts .Confirming IS 1256.1967 at non-road crossing .

H Candolkar And Sons