Providing 2 Nos of Passenger Lift to the Construction of Multipurpose Evacuation Center at Kodiyakadu Village of Vedaranyam Taluk in Nagapattinam District

Design, Engineering, supply, fabrication, erection, testing, commissioning and handing over of 20 persons Passenger lift with Machine Room ,Speed : 1.5 m/sec with Stainless Steel Panels , Disable Friendly , Microprocessor Based Controller, VVVF Drive ,Fire Rated Doors and ARD with the following Technical Specifications 1. Location : Multi Purpose Evacuation Centre. Kodiyakadu 2. No of Lift : 1 No 3. Type of lift : Passenger Lift 4. Capacity of lift : 20 persons capacity passenger lift (1360 Kg) 5. Speed : 1 .50Metre / Sec 6. Type of Drive:microprocessor based controller, VVVF drive, Fire rated doors and ARD. 7. No. of Floors : ( G + 2 Floors (3 stops) 8. Total Travel: 7 metres Approx 9. Levelling Accuracy: High level accuracy with smooth and jerk free stopping. 10. Construction of Car: 18 SWG High quality stainless steel car and hand rail , PVC flooring, Perspex False ceiling Neat hair line finish and mirror finish in rear panel. 11. Position of machine: Directly above the lift well. ( Gearless) 12. No. of landing entrance: 3 Nos 13. No. of car entrance: 3 14. Car entrance door: Power operated V3F drive Centre opening sliding stainless steel scratch proof door with hair line finish.

30. Scaffolding: Included in the scope 31. Sill angles and facia plates: included in the scope. 32. Steel for lift machinery: Included in the scope. 33. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year. 34. Automatic Rescue device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories. 35. Provision of intercom with phone: To be provided by lift contractor with one handset in the lift car and another handset in the lift machine room. 36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 37. Floor position: Included with LED display and announciator with music 38. Special features: a. Infra-red door sensor with full height screen

b. Stainless Steel signal fixtures. c. Vandal proof S.S. Button with S.S. cover d. SS door frames for landing doors. e. V3F door operator. f. Call Register signal g. Stainless steel facia plate for car operating panel and landing fixtures. h. On-Off switch for fan and light. i.Over load warning indicator with audio announcement 39. Other standard features: Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, single reduction worm gear, electro magnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joint joist for mounting the machineries. 40. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period of not less than one year. 41. Site testing in accordance with IS 14665 should be carried out at the time of handing over. 42. Supply of operation and maintenance manual with necessary tools for operation. 43.Disabled friendly features as per Differently Abled act 44. 2 hours fire rated doors

Supply and clarnping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps)

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete(SD-224)

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 32A 4P MCB as incoming and 12 Nos 6A to 32A SP MCB as outgoing in flush with wall with Earth connection only. Higher End

Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm copper wire and making good of the concealed portion with suitable colour

Add GST

Please Enable Macros to View BoQ information