SPECIAL REPAIRS TO COMPOUND WALL AT REAR SIDE OF BUILDING NO 789 790 AND SERVANT QUARTERS BUILDING NO 28H AFGH AT MOUNT ROAD AND CERTAIN OTHER SANCTIONED WORKS UNDER GE CHENNAI

Amount

BOQ UPLOADED ON 18 AUG 2022

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in hard/ dense soil all as specified and directed.

Excavation in trenches in hard/ dense soil not exceeding 1.5m in wide and not exceeding 1.5m in depth and getting out complete all as specified and directed.

Excavation over area in hard/ dense soil n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc. and getting out complete all as specified and directed.

All as per item No. 4.00 above but depth exceeding 1.50m and n. exc. 3.00m.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing excavated material/ soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Removing excavated material/ soil to a distance exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Removing excavated material/ soil to a distance exceeding 5km but not exceeding 15km complete all as specified and directed.

M&L for broken stone or boulders hard core of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Cleaning of septic tank and sumps of any depth by bailing out fluid including removing of sediments, sludge etc. using honey sucker machine complete all as specified and directed.

Supply only liquid water proofing compound (PIDI PROOF) all as specified and directed.

Supply only integral water proofing compound conforming to IS 2645 - 2003 all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

M&L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Extra for forming fair finishing to drain or channels 30cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc., complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping and benching including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

M&L for providing RCC M-30 (design Mix) using graded stone aggregate as in roof beams, cantilevers, bressummers, lintels complete all as specified and directed.

M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like all as specified and directed.

M&L for providing RCC M-30 (design Mix) using graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for precast RCC (1:1½:3) type A-1 using 20mm graded aggregate as in manhole covers, landings, chullah hoods, chajjas with plain faces set in cement mortar (1:6) complete all as specified and directed.

M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in walls, retaining walls and the like of any thickness complete all as specified and directed.

M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like complete all as specified and directed.

M&L for providing RCC M-30 (design Mix) using graded stone aggregate as in columns, pillars, piers, posts and struts etc., complete all as specified and as directed.

M&L for brick work straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4) using old size fly ash bricks complete all as specified and as directed.

M&L for brick work straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) using old size fly ash bricks complete all as specified and as directed.

M&L for broken glass coping on top of walls in cement mortar (1:3), 25mm thick with a rounded or weathered finish and before the mortar has set, glass (of bottle or thick glass) broken to approximately 63mm gauge, shall be firmly embedded at the rate of 10 Kg/ sqm of rendered surface, jogged edges of the glass being left projecting complete all as specified and directed.

M&L cutting holes in brick/ stone walls built in cement mortar or cement lime mortar for inserting hold fats and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate for the required depth of embedded portion of holdfasts or lugs measured from the face of jamb into the wall n. exc. half brick including making good complete all as specified and directed.

M&L 20mm thick Granite tiles (of any type) work (table rubbed and polished) as in cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including cutting & polishing laid over and including 15mm thick screed in cement mortar (1:6) including making hole for gas pipe and dismantling the old stone complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick of for rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to challah hoods, chajjas, troughs and similar works for rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc. 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but not exc. 20cm wide flat rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to face of walls, retaining walls, abutments, parapets and similar works with fair finished surfaces of concrete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete square, rectangular or polygonal complete all as specified and as directed.

Use and waste of formwork to foundations, footings, bases of columns, rafts & raft beams, sides & soffits of foundation & plinth beams and similar works; vertical or batter for rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to sides and soffits of beams, sides of bands laid flat for rough finished surfaces of concrete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but n. exc. 4.0 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the drilling 100mm long MS screws using PVC fastener complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm thick plain colour colour PVC sheet on back face fixed to frame at site complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton door shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitred beads for securing glass etc.; size of members as specified in SSR Pt 1 section 8 clause 8.24(a) supplied and fitted to chowkats with plain, chamfered or rounded mitred and rebated sash bars any numbers, complete all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size ISI marked all as specified and directed.

S&F stainless steel butt hinges, medium weight cold rolled 75mm size ISI marked all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 125mm long all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long all as specified and directed.

S&F aluminium handles, cast type anodised 100mm size all as specified and directed.

S&F aluminium handles, cast type anodised 150mm size all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repairs towel rail 600mm long between flanges, brass chromium plated fixed with brass screws as per Cat No. BA-40 of Prayag or equivalent from other specified makes complete all as specified and directed.

S&F floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repairs aluminium powder coated designer curtain rods (drapery rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws complete all as specified and directed.

S&F aluminium powder coated designer brackets for curtain rod suitable for aluminium powder coated designer curtain rod all as specified and directed.

S&F figured glass 3.0mm thick, pinhead type and glazing with oil putty in square n. exc. 0.5 sqm in each pane complete all as specified and as directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M&L for 10mm dia and over mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for 8mm dia mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

S&F anodized powder coated aluminium (minimum thickness of powder coating 50 micron) frames for doors, windows and ventilator with one or more rebates including joining cleats for fixing complete all as specified and directed.

S&F in repairs powder coated aluminium sliding window having thickness of powder coating not less than 50 micron and colour as approved by GE, using aluminium sections (three tracks) weighing not less than 0.495 Kg/RM for frame and 0.48kg/ RM (Interlock) for shutters fixed with sash bars, aluminium anodised snap beads, screws including three sliding shutters, two fully glazed shutters with 5.0mm thick tinted glass fixed with glazing clips and rubber packing and one wire mesh shutter with aluminium alloy wire mesh, fixed screws, roller, interlocking handles etc. complete all as specified and directed.

S&F in repairs powder coated aluminium ventilators using aluminium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodized snap beads, screws and fixed alongwith with 5mm thick frosted/ pin headed glass fixed with glazing clips and one for wire mesh shutter fixed on frame etc. including provision of builders hard ware such as wire mesh, stainless steel hinges, aluminium handles, locking arrangements etc. complete all as specified and directed

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M&L for mild steel round bars as in rungs complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc. as directed (each line wire to be measured) complete all as specified and as directed.

M&L for MS framed brackets of angles or tees with web and flanges cut to shape drilled and counter sunk for screw including bending and welding angles as necessary in fencing confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for steel tubular trusses including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 including one shop coat of zinc chromate primer paint (including preparation of surfaces) at contractor's workshop before fabrication complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

S&F anodised aluminium snap grid size of grid 605mm X 605mm framework for false ceiling including GI suspenders/ hangers fixed to roof slabs by means of ceiling cleats etc. complete all as specified and directed.

M&L providing 12mm thick gypsum board as in false ceiling fixed with screws as per manufacturer's instruction complete all as specified and directed.

M&L 10mm thick rendering in cement mortar (1:3) mixed with water proofing compound PIDI PROOF LW @ 200ml per bag of cement and finishing the surface even & smooth without extra cement complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid for separately.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm stone graded aggregate as in sub base of floors complete all as specified and directed.

M&L 75mm thick PCC (1:4:8) type D-2 using 40mm stone graded aggregate as in sub base of floors complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 thick using 12.5mm graded stone aggregate as in sub floor finished fair and even complete all as specified and directed.

S&F coloured glazed ceramic tiles as in vertical surfaces of size 300mm x 200mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm stone graded aggregate as in plinth protection finished even and smooth complete all as specified and directed.

M&L for Non-skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for joint free non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigments laid as per manufacturer's instructions laid over and including 50mm thick sand cushioning complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in base for chequered cement concrete tiles finished fair and even complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with integral water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: Supply only of integral water proofing compound shall be measured and paid for separately under appropriate item of this BOQ.

M&L for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:6) on other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar (1:3) as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying three coats of white wash on ceilings including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preparation of new surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new wooden or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new or previously untreated steel & iron surfaces of any description not otherwise described over 10cm width or girth including preparation of surface complete all as specified and directed.

M&L for preparing surfaces of steel and iron works new or old treating small articles such as hold fast etc. with tar or coal tar black paint area tarred n. exc. 0.1 Sqm each complete all as specified and as directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc., including taking up or down the existing GI tubing complete all as specified and directed.

S&F galvanised steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc., including taking up or down the existing GI tubing complete all as specified and directed.

S&F galvanised steel water tubing 25mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc., including taking up or down the existing GI tubing complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc., complete all as specified and directed.

S&F galvanised steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc., complete all as specified and directed.

S&F galvanised steel water tubing 25mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc., complete all as specified and directed.

S&F 500 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 1000 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20mm bore ball brass valve, high pressure with polyethylene high density float and fly nut complete, screwed for iron pipe fixed in repair complete all as specified and directed.

S&F 20mm dia ball brass valve, high pressure with polyethylene high density float and fly nut complete, screwed for iron pipe complete all as specified and directed.

S&F 15mm bore stop valve (concealed type), CP fancy type with long shunk and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F stop valve, cast copper alloy, chromium plated, fancy type with long shank & cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for union complete all as specified and directed.

S&F 20mm bore gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 20mm bore gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and as directed.

S&F 25mm bore gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and as directed.

S&F Vitreous china wash down water closet squatting pan, Orissa pattern of size 580x440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern etc., complete fixed in repairs complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern of size 580mm x 440mm white with integral foot rests, 10 litre PVC valveless symphonic action type low level flushing cistern white with inlet, ball valve, float and handle fixed on suitable brackets including flush pipe with and including chinaware ‘P’ trap and flush pipe jointed to rim of pan with and including rubber cone joint and setting the pan in lime concrete minimum 150mm thick alround complete all as specified and directed.

S&F PVC valveless, syphonic action type, low level flushing cistern, 10 litre capacity, white, with complete accessories like inlet, ball valve, float and handle including brackets, PVC flush pipe, over flow pipe etc., complete and fixed in repairs including taking down the exiting one complete all as specified and directed.

S&F PVC valveless, syphonic action type, low level flushing cistern, 10 litre capacity, white, with complete accessories like inlet, ball valve, float and handle including brackets, PVC flush pipe, over flow pipe etc., complete complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm including cutting for and pinning in the ends of bracket or erecting stand but excluding tap, waste chain, plug and porcelain stopper but including brackets and 32mm dia PVC waste coupling with waste pipe complete all as specified and directed.

S&F vitreous china white bowl urinal flat back of size 465mm x 355mm x 265mm (min.) with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed.

S&F in repairs PVC connection 15mm size of length 450mm with PTMT nuts of superior quality as specified and as directed.

S&F in repairs 15mm dia bib tap brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule as per Cat No. 8306 of Prayag or equivalent from other specified makes complete all as specified and directed.

S&F 15mm dia bib tap brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule as per Cat No. 8306 of Prayag or equivalent from other specified makes complete all as specified and directed.

S&F in repairs 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes as per Cat No. 8304 of Prayag or equivalent from other specified makes complete all as specified and directed.

S&F 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes as per Cat No. 8304 of Prayag or equivalent from other specified makes complete all as specified and directed.

S&F 15mm dia brass stop valve/ angle valve chromium plated fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

S&F in repairs chromium plated ABS overhead shower of size 88mm with 225mm SS arm & flange as per cat No. BS-68 of Prayag or equivalent from other specified makes complete all as specified and directed.

S&F 150mm dia cast iron socketed pipes in any length with or without ears jointed with cement joint laid in trenches complete all as specified and directed.

S&F 150mm dia cast iron bend all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches including taking down old pipes with all fittings complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/ floors etc. as in rain water pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches with all fittings complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches including taking down old pipes with all fittings complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches with all fittings complete all as specified and directed.

S&F 110mm dia PVC (SWR) bend any radius with access door all as specified and directed.

S&F 75mm dia PVC (SWR) bend any radius with access door all as specified and directed.

S&F PVC (SWR) junction single (single 'T') equal or unequal 110mm dia with access door complete all as specified and directed.

S&F PVC (SWR) junction single (single 'T') equal or unequal 75mm dia with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including joining with solvent cement 75mm dia of outlet complete all as specified and directed.

S&F in repair stainless steel plate rack of size 24" x 30" x 10" with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of good quality all as specified and as directed. Make: Prayag Cat No. P-330 or equivalent from other makes specified in Particular Specifications.

S&F stainless steel 1mm thick sink kitchen or laboratory overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm with plugs, washers, waste coupling, waste pipe etc. including bedding in cement mortar on dwarf wall or on cantilever brackets and connecting union to pipe complete all as specified and directed.

M&L reinforced concrete pipe 150mm dia class NP2 laid in trenches and jointed complete with collars all as specified and directed

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 150mm bore RCC NP2 pipe including packing under and haunching against the pipe after they are laid and tested complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stone work including removal of rubbish outside MD land complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise described including separating, scraping and cleaning of reinforcement and removal of rubbish outside MD land complete all as specified and as directed.

Demolition of cement concrete of any description and in any situation not otherwise specifically provided for including removal of rubbish outside MD land complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise specified.

Dismantling plain or corrugated steel sheeting any gauge and thickness including Nainital or similar pattern roof covering all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, kitchen shelfs etc. (laid, bedded and pointed in any mortar) including removal of rubbish outside MD land complete all as specified and as directed.

Dismantling wall/ ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets; any thickness, including cover fillets/ snap grid etc. complete all as specified and directed.

Taking down old unserviceable/ damaged point wiring carefully of any size and description on teak wood batten/ through pipe (light, fan, socket etc.) including removal of battens, pipes/ conduits, sockets, switches, shades, ceiling fittings, bulk head fittings ceiling rose etc. complete and making good disturbed portion of wall to match with the existing surface all as specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light point controlled by one switch.

One Fan/ Exhaust fan point controlled by one switch.

One 3 pin 5 amps socket outlet on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch.

Bell/ buzzer point controlled by one bell push.

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100 V grade conforming to IS -694 drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc. including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provision of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board complete all as specified and directed.

M&L for point wiring complete with 4.0sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100 V grade conforming to IS -694 drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc. including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provision of 4.0sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly for AC/ geyser controlled by one switch 15 Amps on independent board complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amps, 230 volts all as specified and directed.

S&F switch piano, flush type, single pole, one way, 15 Amps, 230 volts complete all as specified and directed.

S&F socket outlet 3 pin, 15 Amp, flush type, 230 volts all as specified and directed.

S&F ceiling rose PVC/ polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

Supply and fix call bell/ buzzer multi tune, 230 volts AC all as specified and directed.

Supply and fix bell bush, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

S&F electronic ceiling fan regulator, flush type, 300 watts all as specified and directed.

S&F high speed BEE 5 star rated standard plain ceiling fan of 1200mm sweep (colour as approved by GE) 230V, 50HZ single phase fixed with suitable clamp and down rod (GI Pipe) including taking down existing ceiling fan and depositing the same in storeyard of AGE E/M complete all as specified and directed.

S&F turbo force 4 blade (300mm sweep) exhaust fans AC single phase 230/ 240 volts, heavy duty corrosion resistant body rigid frame with rubber mountings for minimal noise operation & maintenance free design with pressure die cast aluminium rotor mounted on two ball bearings with maximum air with minimum power consumption conforming to IS: 2312-1967 including taking down existing exhaust fan and depositing the same in storeyard of AGE E/M complete all as specified and directed.

S&F basic all-purpose surface and wall mounted LED batten 20 watt light fitting with aluminium housing and integrated electronic driver including 20 watt LED tube fixed on wall or ceiling including taking down the old fitting complete all as specified and directed. Make: CG Cat Part No. LDL-20-CDL or equivalent of other makes specified in particular specifications.

S&F basic all-purpose surface and wall mounted LED batten 10 watt light fitting with aluminium housing and integrated electronic driver including 10 watt LED tube fixed on wall or ceiling including taking down the old fitting complete all as specified and directed. Make: CG Cat Part No. LDL-10-CDL or equivalent of other makes specified in particular specifications.

S&F fix environmental friendly, ultra-modern, energy saving, surface mounted 10 Watts LED decorative oval bulkhead edge-lit LED luminaire comprising of high brightness including taking down the old fitting complete all as specified and directed. Make: C&S Cat No. SIRIUS/10W or equivalent of other makes specified in particular specifications.

Supply and fix 18 watts round edgepro slim-fit low profile downlights engineered to deliver superior light output and uniformity and fixed to ceiling including taking down old fittings complete all as specified and as directed. Make: Havells cat No. EDGEPRORDDLR18WLED840S or equivalent from other makes specified in Particular Specifications.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 12 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing isolator MCB SPN, 63 Amps, 240 volts including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32 Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 32 Amps, 230 Volts including taking down old one complete all as specified and directed.

Taking down carefully storage type water heater (Geyser) of any type and any make upto 50 Litre capacity after disconnecting all electric connection; de-scaling the inner container, changing heating element, nuts, bolts, bushes etc. including spray painting after filling cavities, keeping in safe custody and refixing after the special repairs to building are complete including making water connections and testing on completion complete all as specified and directed.

Taking down existing energy meter for carrying out repairs to building, keeping in safe custody and refixing in the same location/ quarter after completion of repairs complete all as specified and as directed.

M&L for submain wiring complete with two runs of 4.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit medium grade ISI marked 25mm external dia fixed on wall/ floor/ ceiling along with conduit fittings and accessories, fixed on ceiling with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring with conduit any type complete all as specified. Note: Two runs of 4.0sqmm multistranded cable and one run of 4.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

M&L for submain wiring complete with two runs of 6.0 Sqmm single core, multi-stranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non-metallic PVC conduit medium grade ISI marked 25mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 6.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified. Note: Two runs of 6.0sqmm multi-stranded cable and one run of 6.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

M&L for submain wiring complete with two runs of 10.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit medium grade ISI marked 25mm external dia fixed on wall/ floor/ ceiling along with conduit fittings and accessories, fixed on ceiling with one run of 10.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring with conduit any type complete all as specified. Note: Two runs of 10.0sqmm multistranded cable and one run of 10.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

M/s.Sai Agency

Sri Aruna Associates

SHRI BALAJI CONSTRUCTIONS

G.L.THIRUMALAI NAIDU AND COMPANY

DJ Group