SPECIAL REPAIR TO ROAD AT AMU AT INF SCHOOL UNDER GE MIS INF SCHOOL MHOW

Amount

Scrifying or picking up gravelled,macadam or bituminous macadam surface in area not exc 400 Sqm and depth exc 50 mm and not exc 100 mm deep and removing to a distance not exc 50m and all materials thrown from site etc complete all as specified and directed

M&L for preparing the black top surfaces of roads by brushing with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clear the surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with paving bituminous primer VG- 30 at the rate of 5 kg per 10 sqm and M&L for applying premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber complete all as specified and directed. Note: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

M&L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

Material and labour for marking lines, dashes, arrows, letter etc 15 CM wide on bituminous surface with retro reflective thermoplastic road marking paint with reflector sing glass beads@ 250 gms per sqm area conferming to MOST & BIS specification ,of thickness 2.5 to 3.0 mm thick of white/golden/yellow as approved colour/shade and applied with machine as per manufactures instruction including preparation of surface ie cleaning of surface by removing all dust , dirt, oil grease etc complete all as specified and directed

S&F in repairs CAT Eyes as (Road Stud) 120mm x 90 mm size made of poly carbonate moulded body with electro nically welded prismatic retro range on both sides of maximum retro reflection in wet and dry condition to be fixed with bituminous adhesive BT-69 including removal of existing cat eyes of any description complete all as specified and directed. Make - 3M/Sun Eyes/Dark Eye as approved by GE.

S&F in repairs super delux quality solar stud of Aluminium body including solar- powered by monocrystal solar panel. One high capacity Ni-Cd rechargable battery Approximate 1000 mtrs LEDs- 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours back up- 12 hours of comtinous lightening at night complete all as specified & directed. Make - SUNEYES/ Dark Eye / 3M as approved by GE.

S&F in repairs road delineator made of 50 mm round MS pipe 80 to 100 cm high above ground level with reflective bends of 3M Hi intensity micro prismatic grade retrorefective sheeting 5 cm red 2 Nos and 10 cm yellow 1 No in center with metal jalli for protection, painte black all as specified and directed. Note :- 1. Rate for excavation, removal of surplus soil and size of PCC pit is 200mm x 200mm x 200mm filled with PCC 1:2:4, type B-1 is included in the quoted rate complete all as specified & directed. Make - SUNEYES/Dark Eye/ 3M as approved by GE.

Narayandas Phoolchand Mishra Infrastructures Pvt. Ltd.

M/S Pawan Babulal