Providing, Fitting, Testing and Commission of Submersible Pumping Units Along with Allied Accessories for 125 mm dia Tube Well N.H.O of Abdul Razaq at Baddalaw Naginder Pampore.

Amount

Providing, Fitting and Commissioning of single phase submersible type pumping unit along with allied jobs. The complete details of the job are as under:` Providing, fitting and testing of single phase pumping equipment with following specifications: Discharge = 1000 GPH Head = 80-130 m Speed = 2900 rpm Material of the impeller= Stainless Steel Motor Rating = Suitable for above ratings Make = Reputed make(ISI MARK) The pump motor should be suitable for operation on voltage and frequency confirming to IS: 585-1962 read with upto date amendments and motor starter suitable for motor rating (DOL starter)(DOL)confirming to IS/IEC 60947-4-1 Codes. The pumping motor unit should be coupled together with steel coupling. The job also includes lowering of pumping unit in the well then proper testing and commissioning of pumping unit on full load at site and providing of Characteristic Curve of pumping equipment is compulsory.

Providing, fitting and lowering of 32 mm Dia GI Column pipes (B Class) of reputed make (ISI mark) confirming to relevant IS Codes. Each Pipe is to be properly threaded at both the ends and the length of each pipe should not exceed 3 Meters (10 feet). The job includes providing and fitting of GI Sockets for jointing purpose of the pipes. All the tools & tackles including Chain pulley block, Tripod stand, carriage, skilled welder/Labours, helper, allied items required for the execution of the complete job are to be arranged by the firm. (The quantity of column pipes shall depend on the drilling depth and DWL of the well)

Providing and fitting of 5 KVA single phase automatic voltage stabilizer (Dry type)e & 3P-15A top (2 each), Also included in the job is P/F 9W LED lamps (04 No.).

Providing and Fitting of multi-stranded copper cable, PVC insulated, internal intermediate sheathed of 06 mm Sq. 3 core Submersible cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) – 1964 of reputed make(ISI marked) for submersible pumping equipment & for inter connections of electrical gadgets. (Quantity of the cable depends upon the position of submersible motor installed below ground level.)

Providing and Fitting of 5mm steel wire rope for holding/anchoring of pumping unit.

Providing and fitting of 63 Amp DP switch with 3pin top. The job includes providing and fixing of 3ft × 3ft bakelite sheet of wall with necessary arrangements

P/F of 40mm dia MS holding clamps fabricated out of 10mm thick MS plate with nuts and bolts. The job also includes p/f of Well Cap Cover suitable for 125mm dia MS Casing with proper slots for cable and pipe with nuts and bolts as per site requirement

P/F of 40mm dia MS holding clamps fabricated out of 10mm thick MS plate with nuts and bolts. The job also includes p/f of Well Cap Cover suitable for 125mm dia MS Casing with proper slots for cable and pipe with nuts and bolts as per site requirement

Earth work in excavation by manual means over areas exceeding 30cm in depth, 1.5mtr in width as well as 10 sqm on plan including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be leveled and neatly dressed.

Providing and laying of stone soling hand packed in horizontal including carriage upto 06 Kms

Providing and laying of PCC of 7.5 mix as mud mat including all carriage upto site of work.

Ahangar Industries