Design, Development and upgradation of existing water supply system along with other civil works With One Year O andM for Panagarg Zone II and WTP for 5.32 MGD Capacity Panagarh Industrial Park Water Supply Scheme under DWSD, P.H.E. Dte

Supply, delivery & storage at the site of Full Bore Electromagnetic Flowmeter Protection: IP68 (Minimum inbuilt 20-meter cable, factory potted), Full bore type Electro Magnetic Flow Meter with Smart Transmitter (Volume Flow rate output: MODBUS Output with LCD 4-line backlit Display and configuration through Bluetooth, Calibration lab as per ISO 17025, Accuracy:0.5% , +/- 2mm/sec, Inbuilt Measuring, Reference, grounding & Empty Pipe Detection Electrode with Polyurethane/Hard Rubber Liner, Supply: 24V DC or 230VAC. Process Connection: CS/SS Flange PN10. Welding standard as per ISO3834-2 (Make: Schinder/ ABB / Siemens/ Reputed/ E & H)

Magnetic Flow Meter DN - 150

Magnetic Flow Meter DN - 100

Protection Panel for Flow Transmitter: Supply, delivery & storage at the site of weatherproof Protection panel consisting of Fully wire protection panel with 24 V DC, SMPS, Surge protection, over voltage protection, MCB all complete as per direction of EIC

Supply, delivery & storage at the site of Butterfly Valve: • The products conform to IEC-15714-2 Technical conditions for basic type valve electric actuators • Power supply: 220V AC/240V AC/110V AC/24V DC • Outdoor protection grade: IP 67 as per IS / IEC 60529 • Temperature: -30°C -70°C, • short time work: 10 min (rated), • No strong vibration, • Motor: Single phase valve special motor • Reduction Unit: it is composed of two pairs of worm and worm gear. • Travel Control Unit: from the output shaft to lead out the cam shaft to make 90° rotations and the limit cam can also make 90° rotations to control the travel. The position indicating plate I co-axial with the cam shaft to make 90° rotations and indicate the valve position. And, can provide potentiometer for remote electric signal output PHED Approved make

Remote Terminal Unit (RTU) With Communication Gateway: • Power Mechanism- Battery backup based (DC UPS) DIN rail mount with minimum 1 hrs backup. • RTU Controller internal flash memory: minimum 512 MB • I/O Module- DI/DO & AI – 1 set. • Communication Protocol – Secured transmission of telemetry via Sparkplugb MQTT standards. • Data Transmission interval- 15 min data transmission • Panel Body Type- IP 65 • Configurations – Support remote configuration of data transmission frequency. • RS-485 port for communication. • External MODEM/ gateway with quad band GSM/ GPRS (4G/LTE/5G) (850/900/1800/1900 MHz) with VPN facility. • Data Backup: storing data for a minimum of 7 days of in case loss of connectivity. • Ambient temperature (operation)- 0 °C to 60 °C

Installation Accessories for Flow meter: Supply and Installation at site of MS flanged Dismantling joint (PN 1.0 rating)-2 nos., MS fabricated companion flanges (FF, IS: 6392 Tab 11) drilling to match as per IS 1538 table 4 & 6, DN 150 Slip on flange-2 nos., short piece with one end flange & one end socketed-2 nos., reducer/enlarger of appropriate size, Gaskets as required as per direction of EIC

Installation Accessories for Valve: Supply and Installation at site of MS flanged Dismantling joint (PN 1.0 rating)-2 nos., MS fabricated companion flanges (FF, IS: 6392 Tab 11) drilling to match as per IS 1538 table 4 & 6, DN 150 Slip on flange-2 nos., short piece with one end flange & one end socketed-2 nos., reducer/enlarger of appropriate size, Gaskets as required as per direction of EIC

Installation of Flow Meter

Installation of Valve

Installation of RTU

Installation of Protection Panel

One Year Subscription charges for Development of Web Architecture based dashboard (Web Based SCADA) per location including SIM charge:Performance: Latency, data processing speed, all servers located in data centres in India for minimal network latency.Usability: Solution shall provide users with a highly efficient and aesthetically pleasing interface Security: Data encryption in transit and at rest, access control, Secure Development Life Cycle Maintainability: Infrastructure shall be provided as a service and therefore generate no operational maintenance requirements Availability: 99% uptime guarantee, short maintenance windows with prior information Reliability: Disaster recovery capability, redundancy of systems, data backup ,Compatibility: API, data format, integration with existing systems (edge, plc, etc.) modern browser support ,Portability: Solution is accessible from any location with an active internet connection, no vendor locks in for used components in the cloud, every component can be replaced in reasonable time Certification: ISO 9001, ISO27001, ISO 27017 compliant, Support: Technical support available office time, response time < 24h, support channels (mail, ticket, etc.) Scalability: Infrastructure as code, no downtime for increased usage. Template for multiple plants, Hardware: Connectivity of sensor data to the cloud compliance / data localization: data stored in India Interoperability: Data exchange standard, cross-platform support, Open API to access all data programmatically, industry standard interface (Sparkplug B) for field data ingestion Monitoring: 24/7 monitoring and reaction, alerting mechanism Data Management: Data storage capacity, data analytics Flexibility: Customizable options, adaptability to changing requirementsEnergy Efficiency: Low energy consumption edge hardware Responsive Design suitable for Desktop and Mobile users (phones & tablets), Support Indian localization settings including date / time format, IST time zone Support the ability to easily share content with other users via context specific URL parameters Users can share specific filtered views (dashboards, charts) with others without losing the context Event Log supports Asset Health (NE107), Process Health (threshold limits), Communication, Maintenance and Asset Action Events Event Log can be filtered by current day, last 24hrs, Last 7 days or a custom period Event Log can be filtered by Asset type (Flow, Level, Pressure, Temperature, Analysis, Pump, Valve Event log can be filtered by Application types (Abstraction, Distribution) Event Log can be zoomed into a single location or can be zoomed out cover the full solution scope Event log shows Event type, date/time, Event Title, Source object, Location, Source Object Name, Event ID, Acknowledgment Status, Comment Status. Individual Events can be acknowledged or commented by any user (visible to all other users) Events can be manually created by any user (visible to all other users) Up to 4 simultaneous qualitative datasets generated by any connected asset can be visualized in a chart.

Events can be visualized alongside the respective qualitative data for any asset in a chart. Qualitative chart datasets can be exported in an excel compatible format According to notification configurations relevant notifications shall be sent via email or SMS. Notifications shall be user configurable for asset health, process health, communication and maintenance event categories both globally and for specific tags

Construction of R.C.C Kiosk Room [(2.40m x 1.75 m x 3.0m (ht)] (As per Drawing.)

Supply , Installation & laying of Electric cable, Sub - meter, Stabiliser & necessary work for provding power connection of 24V DC or 230VAC. Power connection from WBSEDCL of Panagarh Industrial Park (Submit the Power connection original WBSEDCL bill for clam of necessary payment)

Supply and delivery of CIDF sluice valve (Special type) PW- 1.00 of different dia make with CI double flanged non rusting spindle sluice valves conforming to IS 14846 -2000 with latest emended having body dome/bonnet and cover of C.I.Gr-F.G 210mtr. spindle of IS-6603 G.R12/Gr-13 non magnetic, nuts seat rings are of Gun one tal as per IS:318LTB-2 flanges and drilled to IS:1538 Part IV & V Ivalves are suitable for max. working pressure of 10kg/cm2 (seattest) and body tested to 15kg/cm2. N.B:The aboveitem should be procured from the reputed manufactures as per deptt. approved vender list

200 mm dia

150 mm dia

100 mm dia

Labour for fitting and fixing G.I. pipes for under ground work including cost of jointing materials, cutting pipes,making threads etc. complete in all respect including cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting to G.I. pipes and specials with bituminous paint. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting to be paid seperately.)

150 mm dia.

100 mm dia.

Supply of G. I. pipes of TATA make including necessary sockets

150 mm dia. Medium quality

100 mm dia. Medium quality

Sypply of E.R.W.M.S.(Electrical Resistant Welded M.S.) black pipe of TATA make (heavy quality) as per standard specification, 5 mm thick.

150 mm dia. (internal)

100 mm dia. (internal)

Making Flanged joints to flanged CI/GI Pipes and specials of the following nominal dia with rubber insertion,bolts and nuts of approved quality and as per direction of the EIC.(including cost of Rubber insertion,bolots & nuts).

a) 100mm.dia.

b) 150mm.dia.

Supply and delivery of M.S. Flange drilled as per IS specification a) 100 mm ( 10 mm thick)

a) 150 mm ( 10 mm thick)

manufracture supply and delivery of CI mechanical joints double socket bends of different dia as per below ( IS: 13382/2004) complete set with sealing gasket of SBR quality as per IS 16: 5382( type 2 C ) / 1985 described in IS : 12820/ 2004 cast Iron follower Gland and Mild steel Nut bolts only Galvnized and suatable for jointing with CI / DI pipes including cost of materials packing, forwarding loading transportation , unloading and stacking at departmental store . third party inspection charges and all other charges & taxes complete as per direction of EIC ( Rates are inclusive of all type of taxes , charges etc.a) 150 mm dia Coller Ref: Central Circle Schedule

Welding in M.S. structural work with gas or electric. a) Continuous weld. (As per PWD schedule-2017 page- 111,sl no: 2)

Cutting to requisite length or shape departmental R.S. joists, channels, angles, tees, plates etc. ( Payment to be made on area of cut surface) ( Ref: PWD Schedule -2017 page no : 101,sl no: 3)

manufracture supply and delivery of CI mechanical joints double socket bends of different dia as per below ( IS: 13382/2004) complete set with sealing gasket of SBR quality as per IS 16: 5382( type 2 C ) / 1985 described in IS : 12820/ 2004 cast Iron follower Gland and Mild steel Nut bolts only Galvnized and suatable for jointing with CI / DI pipes including cost of materials packing, forwarding loading transportation , unloading and stacking at departmental store . third party inspection charges and all other charges & taxes complete as per direction of EIC ( Rates are inclusive of all type of taxes , charges etc. a)150 mm dia collar (SE Central Circle-2017)

Cost of pipe line crossing ( up to 600 mm dia) by adopting trench less technologies ( e.g. Jack Pushing method etc.) for railway,National Highway or any other important road of heavy vehicular trafffic of minimum 7.5 m carriageway where no other mode of crossing is possible , including the cost of outer most 600 mm dia Hume pipe ( NP3/NP4) as casing pipe ,all labours,materials ,tools and tackles ,cleaning of site etc. complete in all respect but excluding the cost of pipe carrying water.(PHE SOR 2015)

250 mm dia

For supplying & delivery of RCC Spun Pipe as per IS : 458/2003 NP-3 ( Pushing 600 mm dia RCC Hume Pipe ,Payment will be made on actual length of pushing Hume pipe at site) a)300 mm dia. (40 mm th.) NP-3 [Ref SE RCFA W/S Circle P-24, Item -18 ]

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. (a) upto 150 mm. thick. (c) Extra rate for each addl floor over the rate of ground floor. (Ref: PWD Schedule page no: 10 sl no: 2)

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water and ramming complete including the cost of supply of sand. ( payment to be made on measurement of finished quantity) By. Find Sand (Ref: PWD Schedule page no: 2 sl no: 4)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety (Ref: PWD Schedule page no: 26 sl no: 10)

Single brick flat soling of picked Jhama bricks including ramming and dressing but to proper level and filling soils with local sand. Ref of rate – PWD Bld. Schedule, Page – 14, item 1

Brick work with first class bricks in cement mortar (6:1) a) in foundation.

Plaster (to wall, floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougehning of concrete surface including throating, nosing and drip course where necessary (ground floor) i) With 1:6 cement mortar A)15 mm th. plaster Ref of rate – PWD Bld. schedule ,Page-189, item 1 i )

80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge. [Note: Subgrade CBR shouldnot be less than 5] Colour Decorative Ref : – PWD Bld. schedule Page – 286 item 8 & 3rd corrigenda

Supply,fitting& Fixing of 250mm X 150mm MJ double socket reducer

Supply,fitting& Fixing of 250mm X 100mm double flanged Reducer

Construction of different dia Sluice valve /Air valve /Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt.approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in founda tion including earth work in excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified.

a) 150mm.dia./ 100 mm dia

Providing in Alignment and laying in trenches Valve (PN-1.0) of the following nominal dia.including cutting trenches upto the depth so as to maintain-1(one)mtr.earth cushion from the top of the pipe upto G.L. in any kind of soil,carriage of pipes from local store within the scheme area/Head works site store to pin point site and back carriage of excess materials to head works site store,refilling the trenches including dewaering trenches etc.all complete as per direction of E.I.C(Earth work in excavation,refilling the trenches as per specification and jointing of valve to be measured and paid for seperately).

a) 150mm.dia.

a) 100mm.dia.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For Exposed Work PVC Pipes. A) 25 MM DIA

Construction of RCC street stand post (700mm height) of RCC (1:1.5:3) footing over 75mm thick 4:2:1 P.C.C over a single B/F soling with 1% reinforcement, connected with saddle piece & 15mm dia brass ferrule with supplying fitting, fixing 15mm dia G.I.nipple, G.I.socket, G.I. 200mm x 150mm reducing elbow and 20mm dia GI(m) TATA pipe of (avg.) 2.6mtr. long and one 15mmdia alloy Iron with brass spindle bib cock with socket and 20mm G.I. elbow 2nos. with 15mm GI(m) TATA pipe of 0.225mtr. for connection of stand post to distribution line as per deptt. design and drawing as per direction of EIC along with Construction of platform of size CC platform (1:2:4) over a single B/F soling below G.L over 150mm. thick sand filling, neat cement finish over platform and inner side of band and 15mm thick cement plaster (4:1) on top of platform band and outside upto G.L. as per deptt. drawing and as per direction of EIC

Making interconection with existing water mains including tapping driling fitted all complete.

3 Month Trial Run & Preparation & submission of Monthly Meter Reading, of Taking Reading, of Every Connection,benificiaryand Office with necessary arrengement

Electricity Charge (Bill) by proudece original Bill & Payment voucher

HANNAN BUILDERS PRIVATE LIMITED (BID ID -6476070)

M S GOUTAM ROY (BID ID -6489640)

HANNAN BUILDERS PRIVATE LIMITED

M S GOUTAM ROY