DAY TO DAY AND WELCOME MAINT TO OFFICERS JCO ORS AND CIVILIAN MD ACCN AT DIAT DU GIRINAGAR PUNE 25

Amount

Cleaning and removing all leaves, plants, mud etc from roof tops/side walls at any height and including applying root killer chemical as per manufacturer’s instructions and making good disturbed portion with PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate)in CM 1:3 and finishing the surface to match with existing surfaces and removing the rubbish to a distance not exceeding 500m complete all as specified and directed.

S&F 25mm dia powder coated aluminium draping rods corrugated of approved quality complete all as specified and directed.

S&F powder coated aluminium decorative end brackets suitable for 25mm dia pipes complete all as specified and directed.

Removal of trees/plants complete incl roots any dia, any masonary at any height. including applying root killer chemical as per manufacturer’s instructions and making good disturbed portion with PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate)in CM 1:3 and finishing the surface to match with existing surface complete all as specified and directed.

De-watering from the existing service water tanks of capacity exc 250 ltrs and n.exc 500 ltrs kept over roof slab/staging of any height and cleaning internal surfaces of tanks to remove the deposited scales, dirt, mud and other foreign materials, rubbing with water using coir/jute brushes and washing the surfaces with fresh water, cleaning the inner surfaces with mixture of bleaching powder and water and finally washing with fresh water including taking down existing float valve and re-fixing the same in position after cleaning including writing TANK CLEANED ON (date) on the outer surface of tank complete all as specified and directed.

All as per item no 5.00 above but exceeding 500 ltr and not exceeding 1000 ltr in capacity complete all as specified and directed.

Taking down 15mm bore steel water tubing and connections complete all as specified and directed.

S&F 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down 20mm bore steel water tubing and connections complete all as specified and directed.

S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs 75 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S& F in repairs 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 200 mm long aluminium, anodised or matt finished barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete all as specified and directed.

S&F floor door stopper in repairs 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs 60 cm long SS tubular towel rail 20-mm dia complete all as specified and directed.

Hacking out old unserviceable glass / broken glass panes of any description, from old wooden or metal frames, or stone, concrete or brick surrounds any thickness or size complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs low density polyethylene(LDPE) pipes for working pressure rating 6 Kgf / Sqcm with polyethylene thread union and check nuts for waste pipe of WHB, 750 mm long, 32 mm dia complete all as specified and directed.

S&F in repairs 40 mm dia, 75 cm long PVC low density waste pipe for stainless steel sink of working pressure rating @ 4 Kg / Sqcm with polyethylene union and check nuts complete all as specified and directed.

S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed.

S&F in repairs 100mm dia CP grating for nahani traps with or without hole for waste pipe complete all as specified and directed.

S&F in repairs 15 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs 20 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

S&F fillets for securing wiremesh to steel frame/window and similar work conforming to Fe-290 complete all as specified and directed.

S&F in repairs 15 mm bore, 45 cm long PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and directed.

S&F in repairs 15 mm bore, 60 cm long PTMT connecting pipe fitted with unions to connect iron pipe to PVC pipe on both ends complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, chromium plated, with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with fancy type chromium plated for iron pipe or for unions angle cock complete all as specified and directed.

S&F in repairs 15 mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms/20mm-112gms) complete all as specified and directed.

S&F in repairs plastic water closet seat, white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs for pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, cast copper alloy chromium plated long body fancy type with capstan head, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, fancy type cast copper ally chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms) complete all as specified and directed.

S&F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified and directed.

S&F in repairs 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore Brass CP spindle with cap for mixer tap complete all as specified and directed..

Taking down steel door/window shutter of any size and welded direction and refixing with provn of projection type hinges nos each welded each shuttes leaf and including making functional for easy opening and closing complete all as specified and directed.

Taking down shutters of any description any size all as specified and directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified and directed.

S&F stainless steel butt hinges, of size 100 mm complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L machine cut Granite slab 18 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2:3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd complete all as specified and directed.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one set of fly proof shutter and two set of glazed shutter with frames of size 92.00mm x31.75mm x 1.50mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement all as specified and directed. Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint and including taking down existing windows (Make of Aluminium Sections powder coated : Jindal or equivalent of INDAL.

S&F 12mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work all as specified and directed by Engr-in-Charge.

S&F in repair 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work all as specified and directed by Engr-in-Charge.

S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round complete all as specified and directed.

S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodized of size 125 mm complete all as specified and directed.

Dismantling floor or wall tiling incl cement mortar bedding complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F, glazed ceramic tiles coloured 350 x 250mm/450 x 250mm 8 to 10 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 15 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0( wing 12.5 mm graded stone aggre) as in sub base of floor complete all as specified and directed.

S&F in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish complete all as specified and directed.

S&F in repairs, vitreous China wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete complete all as specified and directed.

S&F in repairs sink made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified and directed.

S&F in repair for vitreous China wash basin, white, flat back, size 580x450mm including necessary brackets, CP couplings, pvc waste pipes etc. complete all as specified and directed.

Demolition and beaking up drain AC/PVC pipes set in cement mortar 100 mm and below complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors bore of the pipe 110 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors bore of the pipe 75 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, bore of the pipe 110 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, bore of the pipe 75 mm complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) junction single,(Single T) equal or unequal with oval access door bore of pipe 110 mm) complete all as specified and directed.

All as per item No 75.00 above but double complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S & F PVC (SWR) vent cowl 75mm Bore complete all as specified and directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks three layer confirming to relevant IS (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete and including taking down existing tank all as specified and directed.

S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks three layer confirming to relevant IS (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete and including taking down existing tank all as specified and directed.

Rectifying the defects in plumbing and sanitari fittings such as water taps, stop valves, pillar tap, waste coupling/pipes, valve, flush tank,WC seat cover, showers, PVC connection etc by removing loose fittings and fixture and rectifying defeats and refixing the same complete all as specified and directed. NOTE: i) The unit rate quoted shall be demed to be included the elements of labour only for rectifying and making the fittings and fixture functional. If replacment of part/items is required to make the fitting functional,the cost for labour and material for the same will be easured and paid for as S&F in repairs under relevent items of this schedule here in after and in such cases this item will not be measured and paid for. ii) The contractor will deploy minimum one plumber and one helper from 0900 Hrs to 1700 Hrs iii) Plumber and helper shall be employed all working days incl sundays and holidays they will report to JE(Civil) concern at 0900 Hrs at AGE B/R Office. iv) The unit rate quoted by the contractor shall be inclusive of working & attending the complaints as diected by JE(Civil) or Engr in Charge. v) The plumber who is on duty must be provided with common mobile cell to faciliate and render good services to the users vi) Complaints slip to be collected daily from complaints cell/AGE B/R Girinagar vii) Contractor shall provided all tools/Ladder etc required for attending complaints with proper tool bag viii) If individual remains absent on site,contractor shall make an alternative arrangment if contractor fails to make such arrangment recovery shall be made at Rs 1000 for plumber and for Rs750 for helper per day. (5 complaints = 01 Job)

Taking down door/ window/ventilator/shutter/cub board and casing and refixing the same in same opening, refixing of hardwork items such as aldrop bolt, tower bolt, handles, Hasp & staple ,butt hinges, spring fingers, hydrolic door closer, piano, hinges etc by removing broken screws,nail etc and providing new screw/nails,repairs to kitchen shelves, partition, curtain rods, pelmet boxes, steel windows handle slag by screwing/nailing etc tighting of loose members of Aluminium door, windows/ventilator including tighting rubber beeding etc. tightening of ceiling member & sheets, loosing/Tightning sheets window, ventilator, etc, complete all as specified and directed. NOTE: i) The unit rate quoted shall be demed to be included the elements of labour only for rectifying and making the fittings and fixture functional. If replacment of part/itmes is required to make the fitting functional,the cost for labour and material for the same will be easured and paid for as S&F in repairs under releventitems of this schedule here in after and in such cases this item will not be measured and paid for. ii) The contractor will deploy minium one Carpenter and one helper from 0900 Hrs to 1700 Hrs iii) Carpenter and helper shall be employed all working days incl sundays and holidays they will report to JE(Civil) concern at 0900 Hrs at AGE B/R Office. iv) The unit rate quoted by the contractor shall be inclusive of working & attending the complaints as diected by JE(civil) or Engr in Charge. v) The Carpenter who is on duty must be provided with common mobile cell to faciliate and render good services to the users. vi) Complaints slip to be collected daily from complaints cell/AGE B/R Girinagar. vii)Contractor shall provided all tools/Ladder etc required for attending complaints with proper tool bag. viii)If individual remains absent on site,contractor shall make an alternative arrangment if contractor fails to make such arrangment recovery shall be made at Rs 1000 for carpanter and for Rs750 for helper per day. (5 complaints = 01 Job)

S & F in repairs PTMT hand shower ( Health faucet) with 8 mm dia 01 m long flexible tube and wall hook make-prayag

S & F in repairs chromium plated faucet health (hand jet) 15mm bore with fittings, and including two way bib tap complete all as specified and directed.

S& F in repairs toilet paper holder of brass chromium plated, complete all as specified and directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws, complete all as specified.

S & F in repairs for door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed.

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified.

S & F in repairs soap dish chromium plated of size 100 x 100 mm any type, chromium plated brass screws complete all as specified and directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws, fixed as in repair complete all as specified and directed.

S & F in repairs kitchen sink waste couplings size required at site etc. complete all as specified and directed by Engr-in -charge.

S & F in repairs hand wash basion waste couplings size required at site etc. complete all as specified and directed by Engr-in -charge.

S & F in repairs PVC bath cabinet, size 450 x 600mm, comprising of looking glass, space for bath soaps, shampoo, tooth brush and paste, handle towel rail, complete all as specified and directed.

S & F in repairs stainless steel plate rack, made out of 1.00mm thick sheet of size 75 cm x 75 cm complete all as specified and directed.

Pratap enterprises (BID ID -3102581)

J.G.Goel (BID ID -3113720)