Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹64.8 LAccepted-AOC D 151 SHYAM PARK EXTENSION SAHIBABAD GHAZIABAD | GHAZIABAD | GHAZIABAD | UTTAR PRADESH | ₹64.8 L | L1 | Accepted-AOC Being L-1 Bidder |
| 2 | L2₹65.8 L+₹99,250 (1.53%)Rejected-Finance PLOT NO 150 GALI NO I VANDANA ENCLAVE KHORA GHAZIABAD UTTAR PRADESH 201309 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201309 | ₹65.8 L+₹99,250 (1.53%) | L2 | Rejected-Finance Not being L1 Bidder |
| 3 | L3₹67.0 L+₹2.2 L (3.44%)Rejected-Finance | ₹67.0 L+₹2.2 L (3.44%) | L3 | Rejected-Finance Not being L1 Bidder |
| 4 | L4₹69.2 L+₹4.3 L (6.71%)Rejected-Finance | ₹69.2 L+₹4.3 L (6.71%) | L4 | Rejected-Finance Not being L1 Bidder |
| 5 | L5₹70.0 L+₹5.2 L (7.95%)Rejected-Finance | ₹70.0 L+₹5.2 L (7.95%) | L5 | Rejected-Finance Not being L1 Bidder |
| Sl No | Description | Qty | Unit | M/S SHARMA ENTERPRISES L1 | SSA TECHNO CONSTRUCTION PVT LTD L6 | VALKA CARE AND SERVICES PRIVATE LIMITED L7 | PRAYAG BUILDTECH L5 | Pratibha Enterprises L3 | delcon engineering L4 | A B S Build Care L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 1,000 | sqm | 100 ₹1,00,000 | 98 ₹98,000 | 200 ₹2,00,000 | 95 ₹95,000 | 55 ₹55,000 Lowest | 65 ₹65,000 | 70 ₹70,000 |
| 2.00 | Disposal of moorumlbuilding rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.
Note • item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. | 100 | cum | 350 ₹35,000 Lowest | 1,049 ₹1,04,900 | 1,600 ₹1,60,000 | 2,275 ₹2,27,500 | 395 ₹39,500 | 620 ₹62,000 | 500 ₹50,000 |
| 3.00 | Surface preparation including grinding of existing horizontal / vertical surface using grinding machine / water pressure washer to thoroughly clean brick tile surface, removal of all dirt, chalking, debris, organic growth, algae, mold etc. Cleaning the surface using tar brush / blower / nylon scrub, chemical solution (as per requirement) and drying of surface as per direction and satisfaction of Engineer-in-charge. | 8,000 | sqm | 80 ₹6,40,000 | 70 ₹5,60,000 | 100 ₹8,00,000 | 75 ₹6,00,000 | 31 ₹2,48,000 Lowest | 50 ₹4,00,000 | 68 ₹5,44,000 |
| 4.00 | Repairing / Pointing of joints of brick tiles using polymer modified mortar with Fosroc (Renderoc HS Xtra) / Dr. Fixit (Pidicrete URP) / Penetron (Bondcrete) or equivalent as per the manufacture's specification all complete as per direction and satisfaction of Engineer-in-charge. (The agency must ensure that all the joints are completely filled and no gaps are left. The surface shall be smooth and excess material shall be removed.) | 6,000 | sqm | 80 ₹4,80,000 | 147 ₹8,82,000 | 825 ₹49,50,000 | 70 ₹4,20,000 Lowest | 105 ₹6,30,000 | 150 ₹9,00,000 | 150 ₹9,00,000 |
| 5.00 | Repairing of plaster in parapet walls & pedastals using polymer modified mortar of cement plaster 1:4 (1 cement: 4 fine sand) mixed with Fosroc (Nitobond SBR) / Dr. Fixit (Pidicrete URP) / Penetron (Bondcrete) or equivalent as per the manufacture's specification all complete as per direction and satisfaction of Engineer-in-charge. (The agency must ensure that the finished surface shall be smooth and without any gaps) | 1,000 | sqm | 350 ₹3,50,000 | 571 ₹5,71,000 | 550 ₹5,50,000 | 440 ₹4,40,000 | 295 ₹2,95,000 | 320 ₹3,20,000 | 280 ₹2,80,000 Lowest |
| 6.00 | Providing and applying Polymer modified mortar with high strength non shrink grout Fosroc (Conbextra GP2) / Dr. Fixit (Pidigrout 10M) / Penetron (NFNS Grout) or equivalent including bonding agenct for the gap around Spout pipes as per direction and satisfaction of Engineer-in-charge. (The area around the spout pipes must be cleaned and dried before application of mortar). | 50 | each | 700 ₹35,000 | 582 ₹29,100 | 300 ₹15,000 | 500 ₹25,000 | 450 ₹22,500 | 1,000 ₹50,000 | 250 ₹12,500 Lowest |
| 7.00 | Providing & laying of Polymer mofidifed mortar of cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) mixed with using Fosroc (Nitobond SBR Latex)/ Dr. Fixit (Pidicrete URP) / Penetron (Bondcrete) or equivalent at localised portions in required thickness to maintain the required slope of the terrace and to avoid any water stagnation as per direction and satisfaction of Engineer-in-charge. (The base shall be applied with the necessary bonding agent for the polymer modified mortar for adhesion. The item includes the cost for applying the bonding agent on the surface) | 30 | cum | 9,000 ₹2,70,000 | 17,140 ₹5,14,200 | 9,500 ₹2,85,000 | 9,000 ₹2,70,000 | 8,646 ₹2,59,380 | 7,100 ₹2,13,000 | 5,400 ₹1,62,000 Lowest |
| 8.00 | Providing & laying coving in concave shape of cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) mixed with integral waterproofing compound Fosroc (Nitobond SBR Latex)/ Dr. Fixit (Pidicrete URP) / Penetron (Bondcrete) or equivalent of size 75mm x 75mm at the junction of vertical wall and horizontal surface along te length of the wall. | 1,000 | metre | 500 ₹5,00,000 | 187 ₹1,87,000 | 350 ₹3,50,000 | 105 ₹1,05,000 Lowest | 221 ₹2,21,000 | 260 ₹2,60,000 | 160 ₹1,60,000 |
| 9.00 | Providing and carry out expansion joint treatment after proper surface preparation to remove loose mortars, dust, foreign particles from joints, fixing of tightly packed closed cell polyethylene based back up rod or filler board to ensure no gaps or voids exists, mask face edge of the joint using masking tape for neat finish, mixing of Two part Epoxy Adhesive using slow speed drill till get homogeneous mix, apply it to prepared joint 1-2mm thick with notched trowel or putty blade, tooled to a smooth finish and finally fixing of Dr. Fixit Seal Tape / Fosroc (Expoband) – Flexible expansion joint membrane available in 1 mm thickness. | 25 | metre | 2,000 ₹50,000 | 2,314 ₹57,850 | 2,600 ₹65,000 | 1,600 ₹40,000 | 1,710 ₹42,750 | 2,300 ₹57,500 | 1,250 ₹31,250 Lowest |
| 10.00 | Providing and fixing aluminium plate 3 mm thick over the expansion joint fixed on one end in required size as per direction and satisfaction of Engineer-in-charge. | 10 | sqm | 4,500 ₹45,000 | 5,722 ₹57,220 | 2,000 ₹20,000 | 1,000 ₹10,000 | 710 ₹7,100 Lowest | 3,500 ₹35,000 | 1,200 ₹12,000 |
Tender Value
₹83.5 L
EMD Value
₹2.5 L
Closing Date
7 Jan 2026, 6:00 pmClosed
AGM (E-C)
IMU, Airports Authority of India, Rajiv Gandhi Bhawan, Safdarjung Airport, New Delhi-110003
Waterproofing of Terraces of Rajiv Gandhi Bhawan and other associated buildings at Rajiv Gandhi Bhawan, New Delhi.
2025_AAI_259384_1
AAI/RGB/IMU/E-C/Water Proofing/2025-26
Open Tender
Civil Works
Item Rate
120 days
Rajiv Gandhi Bhawan
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,180
₹2.5 L
16 Jul 2026
17 Dec 2025
9 Jan 2026
18 Dec 2025
7 Jan 2026
18 Dec 2025
18 Dec 2025 - 24 Dec 2025
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Disposal of moorumlbuilding rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note • item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.
Surface preparation including grinding of existing horizontal / vertical surface using grinding machine / water pressure washer to thoroughly clean brick tile surface, removal of all dirt, chalking, debris, organic growth, algae, mold etc. Cleaning the surface using tar brush / blower / nylon scrub, chemical solution (as per requirement) and drying of surface as per direction and satisfaction of Engineer-in-charge.
Repairing / Pointing of joints of brick tiles using polymer modified mortar with Fosroc (Renderoc HS Xtra) / Dr. Fixit (Pidicrete URP) / Penetron (Bondcrete) or equivalent as per the manufacture's specification all complete as per direction and satisfaction of Engineer-in-charge. (The agency must ensure that all the joints are completely filled and no gaps are left. The surface shall be smooth and excess material shall be removed.)
Repairing of plaster in parapet walls & pedastals using polymer modified mortar of cement plaster 1:4 (1 cement: 4 fine sand) mixed with Fosroc (Nitobond SBR) / Dr. Fixit (Pidicrete URP) / Penetron (Bondcrete) or equivalent as per the manufacture's specification all complete as per direction and satisfaction of Engineer-in-charge. (The agency must ensure that the finished surface shall be smooth and without any gaps)
Providing and applying Polymer modified mortar with high strength non shrink grout Fosroc (Conbextra GP2) / Dr. Fixit (Pidigrout 10M) / Penetron (NFNS Grout) or equivalent including bonding agenct for the gap around Spout pipes as per direction and satisfaction of Engineer-in-charge. (The area around the spout pipes must be cleaned and dried before application of mortar).
Providing & laying of Polymer mofidifed mortar of cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) mixed with using Fosroc (Nitobond SBR Latex)/ Dr. Fixit (Pidicrete URP) / Penetron (Bondcrete) or equivalent at localised portions in required thickness to maintain the required slope of the terrace and to avoid any water stagnation as per direction and satisfaction of Engineer-in-charge. (The base shall be applied with the necessary bonding agent for the polymer modified mortar for adhesion. The item includes the cost for applying the bonding agent on the surface)
Providing & laying coving in concave shape of cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) mixed with integral waterproofing compound Fosroc (Nitobond SBR Latex)/ Dr. Fixit (Pidicrete URP) / Penetron (Bondcrete) or equivalent of size 75mm x 75mm at the junction of vertical wall and horizontal surface along te length of the wall.
Providing and carry out expansion joint treatment after proper surface preparation to remove loose mortars, dust, foreign particles from joints, fixing of tightly packed closed cell polyethylene based back up rod or filler board to ensure no gaps or voids exists, mask face edge of the joint using masking tape for neat finish, mixing of Two part Epoxy Adhesive using slow speed drill till get homogeneous mix, apply it to prepared joint 1-2mm thick with notched trowel or putty blade, tooled to a smooth finish and finally fixing of Dr. Fixit Seal Tape / Fosroc (Expoband) – Flexible expansion joint membrane available in 1 mm thickness.
Providing and fixing aluminium plate 3 mm thick over the expansion joint fixed on one end in required size as per direction and satisfaction of Engineer-in-charge.
stage.html
html • 0.07 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
TDWP.pdf
Tender Documents • 18.50 MB
BOQ_299753.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .