SPECIAL REPAIR TO ROOF TREATMENT, TILING, JOINERY, PLASTER, FLOORING AND OTHER CONNECTED ITEMS AT BLOCK NO. P-53 AND P-55 AT ADRDE AGRA UNDER GE I RND DELHI

Amount

Taking down cement plaster onbrick/ stone walls etc any description incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on any faces of brick work in CM1:6, finished even and fair complete all as specified and directed.

M & L rendering 15 mm thick on fair faces of brick/concrete surfaces as in cement mortar (1:4) mixed with WPC finished surface even and fair complete all as specified and directed. NOTE : WPC shall be measured and paid separately as supply only

M&L for rendering 10mm thick on concrete surfaces of ceiling in CM 1:4 and finished the surface fair & even complete all as specified and directed.

M&L for 3 coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for 3 coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.

M&L for complete removal of existing treatment on wall surface and applying two coats of white wash on old plaster surfaces of walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior emulsion paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of Exterior emulsion paint complete all as specified and directed.

M&L Complete removal of existing treatment of wall including cornices etc and making good of filling holes and applying two coat of oil bound distemper over a coat of primer all as specified and directed.

M&L for applying two coats (1mm thick each coat) wall care putty on walls/ ceilings to obtain a smooth surface including making good any undulations on new/old surfaces complete all as directed.

M&L for preparation of old painted wood and wood based surface of any description not otherwise discribed over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for two coats of synthetic enemel paint on old painted steel surface of any description over 10cm width or girth including preparation of surfaces all as specified and directed.

Taking down old loose concrete surface from wall, ceiling, column, beam, slab etc and applying a coat of epoxy resin on concrete surfaces @ 0.30 kg/Sqm including preparation of surfaces as per manufacture's instructions with welded wire mesh lathing of metal stubbing joint etc in ceilings, chajjas, beams & columns etc including all laps, cutting & waste applying 25mm thick (average thickness) of cement and sand (fine grit) in ratio 1:4 mixed with chloride free spray concrete plasticizer as per manufacture's instructions with guniting machine of pressure capacity not less than 5 Kg/Sqcm on concrete surface (excluding parapets in patches) area n.exc 5sqm in each patch at different site locations and surface finished fair and even to match existing tint finally applying 10mm thick plastering in CM 1:4 on fair faces of brick works or concrete surfaces & finished the surfaces fair and even complete all as specified and as directed. Note: Welded wire mess shall be measured and paid separately.

Supply only welded wire mesh of weighing not less than 2.5 Kg per Sqm

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description,over 10cm in width or girth, including preparation of surfaces all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description,over 10cm in width or girth, including preparation of surfaces all as specified and directed.

Supply only water proofing compound.

S&F in repair mild steel work as in framed brakets of angles or tees with web and flanges out to shape, drilled and countersunk forscrew, including bending and welding angles as necessary gusset plates, riveting etc n.exc. 10 Kg each bracket conferming to Fe-410 or FE-310-0 complete all as specified and directed.

M&L for 50 mm thick sand stone slabs in shades, Chajjas, shelves etc. Punched dressed on face and along exposed edges self faced on other side and set & pointed in cement mortar 1:4 etc including taking down/dismantling old unserviceable complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth (Brick walls) complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

All as per ser item No. 23.00 above but 20mm dia.

All as per ser item No. 23.00 above but 25mm dia.

S&F on walls/ceiling or laying in floors, 16mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings complete all as specified and directed.

S&F on walls/ceiling or laying in floors, 20mm CPVC dia CPVC pipes SDR 11& plain CPVC SDR 11 fittings complete all as specified and directed.

S&F on walls,/ceiling or laying in floors, 25mm dia CPVC pipes SDR 11& plain CPVC SDR 11 fittings complete all as specified and directed.

S&F 20mm ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm Stop valves cast copper alloy Chromium plated fancy type long shank concealed type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs Vitreous china squatting pan, Orissa pattern , size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including 110mm PVC (SWR) WC connector with lip ring and PVC (SWR) P/S trap 110mm complete all as specified and directed.

S&F in repairs low level flushing cistern of capacity 10 litre ISI marked complete with inlet ball valve, and handle including bracket complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks tripple layers 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all specified in SSR Part I complete all as specified and directed.

S&F in repair pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot and cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed.

S&F in repairs soap dish, vitreous China white, approximate size 160x 160x90 mm complete all as specified and directed.

S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gm) complete all as specified and directed.

Taking down steel windows and ventilators with frame (without taking off shutters) complete area not exc 1.5 sqm and removing from site of work complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips providing and fixing new ones.

S&F 3mm thick Sheet glass ordinary quality and glazing with oil putty in square n exe 0.5 sq m in each pane complete all as specified and directed.

S&F 4mm thick figured glass, pin headed type and glazing with oil putty in square not exceeding 0.5 Sqm each pane complete all as specified and directed.

S&F factory made steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete as specified and directed.

S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F in repair framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Grade E-165 complete all as specified and directed.

S&F grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 32mm waste fittings, brass, chromium plated for glazed ware sinks , basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement complete all as specified and directed.

S&F 32mm bore low density polyethylene pipes for wash hand basin etc complete all as specified and directed.

S&F in repairs PVC 75mm (SWR) floor trap, plane with grating including jointing with solvant cement complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

All as per ser item No. 56.00 above but 75mm bore.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm dia PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S&F 75mm dia PVC (SWR) vent cowl complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) in ground floors andy pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 100mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) including necessary form work as path, passages, etc, surface finished even & fair & Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified & directed.

M&L for 50mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection with expansion joints 30x10 mm filled with mixture of hot bitumen and sand (bays n.exc 1.50M) complete all as specified and directed.

Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in floor etc complete all as specified and directed.

M&L for Ist quality Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm over 15mm thick screed bed in cement mortar 1:4 laying in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for Ist quality glazed ceramic coloured tiles of size 300x200x6mm thick over 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for Ist quality Non Skid ceramic coloured tiles 7mm to 8mm thick, area of each tile exc 0.18 Sqm but n. exc 0.38 Sqm over 15mm thick screed bed in cement mortar 1:4 laying in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L Coloured Chequered cement concrete tiles 200mm x 200mm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 15mm thick scread bed in CM 1:6 complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like over and including 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar etc laid over and including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut cudappa stone slab 20-25mm thick black over 15mm thick screed bed in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F 150mm long Extruded brass handles, fabricated type polished fixed complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any descriptions exc 1 Sqm and n.exc 2 sqm each complete all as specified and directed.

Refixing shutter in same opening exc 1 Sqm & n exc 2 sqm each complete all as specified and directed.

S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

All as per ser item No. 78.00 above but size 125x60mm

M&L for 35mm thick 2nd class hard wood factory made plain framed panelled shutter (any number of panels), with lock rail and panel of 12mm thick BWP veneered particle board with commercial veneering on both faces. The sizes of rails and stiles as per IS:1003 (Part -I) Kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made glazed and skeletan shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers provided with stiles and rails compete all as specified and directed.

M&L for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shutter complete all as specified and directed.

M&L in repair for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shutter compete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised. width of flaps (when open) in 30mm complete all as specified and directed.

S&F MS 300 oridinary rat tail rod pattern spring incl roller and roller plate complete all as specified and directed.

S&F factory made PVC door frames of size 50mmx47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition compete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in SSR.

S&F 100mm stainless steel butt hinges, medium weight, cold rolled stainless steel, and fixed complete all as specified and directed.

S&F 300 mm long Aluminum alloy, anodised sliding door bolts, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

All as per ser item No 91.00 above but 100 mm size.

S&F 150mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed.

All as per item No 93.00 above but 100mm size.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc complete all as specified and directed.

M&L for Brick work with sub class 'B' Old size bricks straight or corved on plan exc 6 m mean radius built in CM (1:4) complete all as specified and directed.

M&L for cutting holes into or through brick walls built in cement mortar and walls of cement concrete and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 as required (superficial area n.exc 150 Sqcm) complete all as specified and directed.

S&F in repairs stainless steel plate rack for utensils of size 600 x 600 x 250 mm of approved pattern and design all as directed.

S&F in repair stainless steel 20 mm dia rails, and fixing decorative brackets etc.

S&F in repair premium quality of PVC hand rail for staircase of any size complete all as specified and directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aporans etc complete all as specified and directed.

M&L 40mm thick brick tiles laid over 15mm thick screed bed in CM 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed.

M&L for screed bed 10mm thick in CM 1:4 Mixed with water profing compound @ 3% by weight of cement or as per manufacturer's instruction complete all as specified and directed.

M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforcement with following as given here under over the prepared roof surface by applying a coat of cold bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface and a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm and applying further treatment as under:- (i) M&L for a layer of APP based polymeric membrane minimum weighing not less than 3kg/sqm and minium 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms) and on primed surface by forced application complete all as specified. (ii) M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces. Note:- Ponding test with filling of water for continuous 48 hours all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in padding bed plates or mass complete all as specified and directed.

Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.

M&L for point wiring for one light/fan point controlled by one switch complete with FRLS, PVC insulated unsheathed cable, 1100 volts grade confirming to IS-694, ISI marked, 1.5 Sq mm (nominal area) single core with copper conductor, multistranded drawn through and including non metalic rigid PVC conduit 19mm dia and conduit accessories concealed in walls, floors, roofs etc, complete including provision of FRLS, PVC insulated un-sheathed 1100 volts grade, ISI Marked, 1.5 sq mm multistranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed.

All as per ser item No. 107.00 above one 3 pin 5 Amps socket out let on independent board.

All as per ser item No. 107.00 above One 3 pin 5 Amps socket outlet on same board with other switches.

All as per ser item No. 107.00 above but with cables 2.5 Sq mm for point wiring and 2.5 Sq mm for earth continuity conductor all as specified and as directed for 15 A, 3 Pin socket outlet.

S&F Modular flush terminal boxes suitable for 1-2 module modular complete all as specified and directed.

S&F Modular flush terminal boxes suitable for 3 module complete all as specified and directed.

S&F Modular flush terminal boxes suitable for 6 module complete all as specified and directed.

S&F Modular white cover plate with frame suitable for 2 module complete all as specified and directed.

S&F Modular white cover plate with frame suitable for 3 module complete all as specified and directed.

S&F Modular white cover plate with frame suitable for 6 module complete all as specified and directed.

S&F Switch modular type single pole one module, 6 Amps complete all as specified directed

S&F Switch modular bell push 6A, 1 Module complete all as specified directed

S&F Switch modular type single pole one module, 16 Amps complete all as specified directed

S&F Socket outlet modular type, multipurpose, 2/3 pin single pole two module, 6 Amps complete all as specified and as directed.

S&F Socket outlet modular type, multipurpose, 2/3 pin single pole two module, 6 /16 Amps complete all as specified and as directed.

S&F Modular blank plate one module

M&L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

M&L ceiling rose, 3 terminal, PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in repair Sub-main wiring with PVC insulated unsheathed cable, 1100 volts, grade multistranded fire retardant low smoke copper conductors, two runs of single core 2.5 sqmm conforming to IS-694, drawn through and including 25mm dia steel / metal conduit, conduit fittings and conduit accessories alongwith one run 2.5 sqmm PVC insulated single core multistranded fire retardant low smoke and low halogen (FRLSH) copper conductor cable as earth continuity conductor run along the pipe concealed on stone / brick wall and connecting to common earth dolly complete all as specified and as directed. Notes:- (a) Two runs of 2.5 sqmm cable and one run of 2.5 sqmm cable and one run of 25 mm conduit will be measured as one unit length. (b) Cutting chases, making good and finishing to match surrounding surface is deemed to be included in the unit rates quoted for sub-main wiring.

S&F in repair Sub-main wiring with PVC insulated unsheathed cable, 1100 volts, grade multistranded fire retardant low smoke copper conductors, two runs of single core 6 sqmm conforming to IS-694, drawn through and including 25mm dia steel / metal conduit, conduit fittings and conduit accessories alongwith one run 6.0 sqmm PVC insulated single core multistranded fire retardant low smoke and low halogen (FRLSH) copper conductor cable as earth continuity conductor run along the pipe concealed on stone / brick wall and connecting to common earth dolly complete all as specified and as directed. Notes:- (a) Two runs of 6 sqmm cable and one run of 6.0 sqmm cable and one run of 25 mm conduit will be measured as one unit length. (b) Cutting chases, making good and finishing to match surrounding surface is deemed to be included in the unit rates quoted for sub-main wiring.

M&L for Sheet metal enclosures for MCB DB Triple pole and neutral, double door, 4 way, 415 volts, vertical type, powder coated with IP 43 protection, including provision and housing MCCB 63/100 Amps, 16 kA, 4 pole and fixed flush on wall and grouting complete all as specified and as directed. Notes:- (a) The cost of fixing the DB flush to brick / stone wall surface, including cutting holes / chases, packing around the DB with PCC 1:2:4, type B1 using 20mm graded stone aggregate, making good and finishing to match surrounding surfaces shall be deemed to be included in the quoted rates. (b) MCBs shall be measured and paid separately.

Supply and fix in repair MCB DB, SPN 8 way 240 Volt, double door, all as specified and directed.

Material & labour in repair MCCB, four pole, 415 volts, 63 Amps, 10 kA all as specified and directed.

Supply and fix in repair MCCB, four pole, 415 volts, 100 Amps, 25 kA all as specified and directed.

Supply and fix in repair MCB SPN, 40 Amp, 10 ka, 240 volts, all as specified and directed.

Supply and fix MCB SP, 6-32 Amp, 10 ka 240 volts, all as specified and directed.

S&F in repair 20W LED tube with single side connection 6500K complete all as specified and directed.

S&F Batten for 20W LED tube with single side connection 6500K complete all as specified and directed.

S&F LED bulb 7W

Taking down and re-fixing ceiling fan and connecting up including providing of cable from ceiling rose or connector to fan complete all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with GI wire 4.00mm by means of nuts, bolts and washers. GI Wire laid in 15mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) as shown in electrical plat No. 03 of SSR Part-I with following:- (a) GI wire 4.00mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick re-inforced with 8mm dia bars 75mm centre to centre both ways with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

Supply and fix Door Bell, AC, 230V, single pole complete all as specified and directed.

Supply and fix Modular fan regulator step type 120W, 2 Module complete all as specified and directed.

M/s Salim Mohomad

PD GUPTA AND COMPANY