Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST QUOTED | |
| 2 | L2₹40.7 L+₹2.2 L (5.64%)Rejected-AOC 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L2 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 3 | L3₹41.4 L+₹2.9 L (7.40%)Rejected-AOC PLOT NO 127 3 A RATNASAGAR FLATS SECTOR 19 GANDHINAGAR 382019 | GANDHINAGAR | GANDHINAGAR | GUJARAT | 382019 | L3 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 4 | L4₹41.7 L+₹3.2 L (8.19%)Rejected-AOC | L4 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
Tender Value
Refer Docs
EMD Value
₹79,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GANDHINAGAR
GE GANDHINAGAR PO BSF CAMPUS GANDHINAGAR 382045
WELCOME MAINT AND REPAIR TO B/R WORKS AND REPAIR/REPLACEMENT AND MAINT TO RISING/SUPPLY MAIN DOZING PLANT, SUBMERSIBLE PUMP, UG SUMPS ETC. AT MIL STATION DHRANGADHRA
2023_MES_600464_1
GE(A)/GNR/TOKEN/18 of 2023-24
Open Tender
Civil Works
Item Rate
270 days
MIL STN DHRANGADHRA
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE ARMY GANDHINAGAR
₹79,000
31 Aug 2023
2 Jun 2023
28 Jun 2023
2 Jun 2023
26 Jun 2023
13 Jun 2023
2 Jun 2023 - 9 Jun 2023
Amount
S&F 35 mm thick, 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S&F, factory made, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5sq.m but not exc. 4sq.m each complete all as specified and directed.
Taking down steel window/ventilator including grills of any description, n. exc 1.5 Sqm each complete all as specified and directed
S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.
S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.
S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed
S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed
S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.
S&F, mortice lock of mild steel, vertical type of size 75mm with duplicate key for door complete all as specified and directed.
S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.
S&F, 125 mm size, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F, in repairs, brass chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange complete all as specified and directed.
S&F, in repairs, 20mm dia,stainless steel, fancy type, tubular curtain rod fix on decorative brackets with decorative globe at both ends complete all as specified and directed.
S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for rolled mild steel angle iron work as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars in gates etc and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed
Dismantling of asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and directed.
S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F mild steel rolled section Fe-410-W(Gde E-250), quality 'A' as in post, main and cross beams, rafters, purlins connected to common rafters fixed with angle iron clips or other connecting plates complete all as specified and directed.
S&F, factory made steel windows with side hung shutter including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including applying one shop coat of red oxide primer complete all as specified and directed.
S&F factory made steel ventilators with top hung shutter including hinges, steel peg stay, glazing bars including applying one shop coat of red oxide primer all as specified and directed
S&F, in repairs, false ceiling at any height, 600x600mm grid with Armstrong 'Prelude XL 32' grid system and 16mm thick mineral fibre acoustic tile 'RH-99 classic lite' with suspension system complete all as specified as per manufacturer's instruction. Make : Armstrong or equivalent as approved by GE.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) completed as specified and directed.
M&L for coloured glazed ceramic tiles of size350x250x7mm/450 x 350 x 7mm thick on vertical surface such as skirting/dado, set and jointed in net cement slurry and pointed in colour cement to match ver 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
M&L for coloured glazed ceramic tiles of size 450 x 350 x 7mm thick High lighter tiles on vertical surface such as skirting/dado, set and jointed in net cement slurry and pointed in colour cement to match over 10 mm thick backing coat in CM 1;4 complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in sub base and finished the surface rough to receive tile complete all as specified and directed.
M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.
M&L, Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed
M&L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete as specified and directed.
M&L for vitrified ceramic tiles light shade 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but including 600 x 600mm size in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6complete all as specified and directed.
M&L for vitrified ceramic tiles light shade 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but including 600 x 600mm size as in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
M&L for heavy duty, exterior grade ceramic tiles (Durastone of Somany/Endura of Johnson or equivalent as approved by GE) of size 300 x300x 10mm thick, set, jointed and pointed in neat cement slurry in trades/risers, landing with white cement and pigment over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.
M&L for chequered cement concrete tiles 30cmx30cmx25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified.
Dismantling stone slab and tiles of any description or thickness in floors,aprons etc.
M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.
M&L for rounding to edges of stone slabs two edge full round,such as in steps,cooking platform and other similar situation complete all as specified and directed.
M&L for 25mm thick cement concrete type B1, 1:2:4 (20mm graded stone aggregate) to receive floor finishes complete all as specified and directed.
M&L for 50mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in cement mortar 1:4 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering cement plaster 15mm thick in cement mortar (1:4) on brick work or concrete surfaces using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, finished even and smooth without using extra cement complete all as specified and directed. Note:- Supply only water proofing compound shall be measured and paid separately.
Supply only, integral water proofing compound.
Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for preparing new plastered or un-plastered walls surfaces and applying three coats white wash complete all as specified and directed.
M&L for preparation of new plastered or un-plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed.
M&L for preparing old plastered or un-plastered walls surfaces and applying one coats of white wash on walls complete all as specified and directed.
M&L for preparing of old plastered or un-plastered wall surfaces and applying one coat of oil bound distemper complete all as specified and directed.
M&L for preparing new plastered or un-plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.
M&L for preparing old plastered or un-plastered surfaces and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for complete removal of existing treatment with Mechanical Scrubber on old plastered or un-plastered surfaces of walls and applying two coats of oil bond distemper over two coats Birla/JK white putty on walls complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall including brooming dowon or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of exterior paint over one coat of primer. Make : Apex of Asian Paints or equivalent.
M&L for complete removal of existing treatment with Mechanical Scrubber on old plastered or un-plastered surfaces of walls and applying two coats of exterior paint over one coat of primer. Make : Apex of Asian Paints or equivalent.
M&L for preparing of new plastered or un-plastered wall surfaces and applying two coats of oil bound distemper over and including chalk whiting on plastered surfaces, preparatory to distempering complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) n.exc. 0.5 sq.m from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.
M&L for 3mm thick figured glass, pin headed type and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.
S&F 4mm thick Sheet glass, ordinary quality with and including neoprene beadings in square nexc 0.5 sq.m in each pane complete all as specified and directed.
S&F, in repair, glass shelf, 600mm long complete all as specified and directed. Make-Jaquar Cat No ACN-1171N or equivalent as approved by GE.
M&L for preparation of old wooden surface of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over existing shop coat of primer complete all as specified and directed.
S&F, in repairs, 15mm brass chromium plated fancy type bib cock with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F, in repairs, 15mm stop valves, fancy type brass chromium plated for iron pipe or for unions and fixed to 15mm bore pipe, complete all as specified and directed.
S&F, in repairs, stop valves angular, chromium plated for iron pipe or for unions and fixed to 15mm bore pipe, complete all as specified and directed as per Cat No MQT-513A of Essco or equivalent make approved by GE.
S&F in repairs rotational moulded polyethylene water storage tanks of capacity 500 Litres (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-I including disconnecting and removal of old U/S PVC tank complete all as specified and directed.
S&F in repairs rotational moulded polyethylene water storage tanks of capacity 1000 Litres (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-I including disconnecting and removal of old U/S PVC tank complete all as specified and directed.
S&F, in repair, pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.
S&F in repair wall mixer with hot and cold fancy type all as per approved sample Make Jaquar or equivalent as approved by GE.
S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. Make-Jaquar (Cat No - ACN -1153N) or equivalent as approved by GE.
S&F, in repair, 8mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook complete all as specified and directed. Make : Jaquar Cat No - ALD-573 or equivalent as approved by GE, complete all as specified and directed.
S&F, in repair, brass, chromium plated, soap dish complete all as specified and directed. Make - Jaquar or equivalent as approved by GE
S&F, in repair, PTMT, Grating, 150mm size(minimum wt 100gms) with hole for waste pipe fixed with cement mortar complete all as specified and directed.
S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)
S&F, in repair kitchen sink with drainage board made of stainless steel 1mm thick including supply and fix 32mm CP waste coupling, plug, washer, 32 mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x4mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.
S & F in repairs white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC flexible pipe, 600mm size for 15 mm bore pipe with brass nut and washers etc complete.
Supply only 15mm pillar taps, brass chromium plated fancy type with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe or for union and fixed to 15mm bore pipe, complete all as specified and directed.
S&F in repairs 32mm waste fittings brass chromi-um plated for glazed ware basin etc with long screwed shanks and fly nuts flange end complete ISI marked complete all as specified and directed.
Supply only PVC waste pipe 32mm bore of size 900mm to 1200mm long complete all as specified and directed.
S&F,in repairs, chromium plated over head shower 100mm dia round shape single flow with arm (ABS Body chrome plated with Gray face plate) with rubit cleaning system complete all as specified and directed as per Cat No EOS-542N of Essco or equivalent make approved by GE.
S&F, in repair, plastic water closet seat white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.
S&F in repairs, 0.63mm thick, stainless steel plate rack of size 120cm x 90cm x 18cm complete all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.
S&F in repairs 25mm bore dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
S&F, in repairs, 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work in cup boards, rebated or flat edged complete all as specified and directed.
M&L for 6mm thick external teak wood lipping fixed to18/19mm thick block or Veneered particle boards with nails complete all as specified and directed.
S&F continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.
S&F hasp & staples 125mm in size, safety type alu. anodised fixed with screws complete all as specified and directed..
Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed..
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed..
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, such as manholes cover etc complete all as specified and directed.
M&L for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs(for manholes etc) with plain fair faces, including chamfers, weathering, throating etc and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed..
S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, inclding cranking, bendiing spirally for hooping for columns, hooking ends and biinding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
M&L for cement concrete 1:2:4 Type B1 using 20mm graded stone aggregate as in fins, facia, chajja, parapet, louvers, railing complete to match with existing all as specified and directed.
Dismantling of cast iron , SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortar and taking out of trenches if required.
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/ walls
S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls
S&F PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and directed.
S&F PVC (SWR) bends of any radius with oval and access door of 110mm dia complete all as specified and directed.
S&F PVC (SWR) branch piece single (single ‘Y’) equal or unequal suitable for 75mm bore pipe complete all as specified and directed..
S&F PVC (SWR) branch piece single (single ‘Y’) equal or unequal suitable for 110mm bore pipe complete all as specified and directed..
S&F PVC (SWR) branch piece single (double ‘Y’) equal or unequal suitable for 110mm bore pipe.
S&F PVC (SWR) vent cowl of 75mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.
S&F PVC (SWR) Floor/ Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed..
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete fixed all as specified.
Taking down old unserviceable 80mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.
Taking down old unserviceable 100mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.
Taking down old unserviceable 150mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.
Taking down old unserviceable 200mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.
Taking out old un-serviceable GI pipes 100 mm laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified & directed,
Taking out old un-serviceable GI pipes 80 mm laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified & directed,
Taking out old un-serviceable GI pipes 50 mm laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified & directed,
Taking out old un-serviceable GI pipes 40 mm laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified & directed,
S&F, in replacement of cast iron sluice valve 150 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .
S&F in replacement of, cast iron sluice valve 100 mm dia with flanged ends class PN-1 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .
S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 20mm bore of pipe complete all as specified and directed..
S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 25mm bore of pipe complete all as specified and directed..
S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 40mm bore of pipe complete all as specified and directed..
S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 50mm bore of pipe complete all as specified and directed..
S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 80mm bore of pipe.
S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 100mm bore of pipe complete all as specified and directed..
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for foundation, etc in hard/dense soil and getting out complete all as specified and directed..
Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation all as specified and directed.
Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed..
S&F in replacement of 150mm bore, cast iron, reflux valve (non return valve) with flanged ended with rubber gasket and nut bolts complete all as specified and directed.
S&F in replacement of 100mm bore, cast iron, reflux valve (non return valve) with flanged ended with rubber gasket and nut bolts complete all as specified and directed.
M&L and testing for 80mm bore cast iron pipes with spigot and socket ends, centrifugally cast, class LA, in any length laid in trenches complete all as specified and directed.
M&L and testing for 100mm bore cast iron pipes with spigot and socket ends, centrifugally cast, class LA, in any length laid in trenches complete all as specified and directed.
M&L and testing for 150mm bore cast iron pipes with spigot and socket ends, centrifugally cast, class LA, in any length laid in trenches complete all as specified and directed.
M&L and testing for 200mm bore cast iron pipes with spigot and socket ends, centrifugally cast, class LA, in any length laid in trenches complete all as specified and directed.
Supply and fixing CI Detachable Joint compleate nut bolts with superior quality Rubber ring set for 200 mm CI Pipe/DI Pipe complete all as specified & directed.
Supply and fixing CI Detachable Joint compleate nut bolts with superior quality Rubber ring set for 150 mm CI Pipe/DI Pipe complete all as specified & directed.
Supply and fixing CI Detachable Joint compleate nut bolts with superior quality Rubber ring set for 100 mm CI Pipe/DI Pipe complete all as specified & directed.
Supply of calcium based, calcium hypo cloride,white to off white free flowing granular chlorination chemical having 65%-70% chlorine content, (calcium based granular disinfectant for water treatment drinking water ) complete all as specified and directed Make:- SREE RAYALASEEMA/ Declibac technologies Pvt. Ltd. or equivalent as approved by GE.
Repairs / rewinding of centrifugal motor of cap 3 HP 3Phase, 415 Volt, by removing burnt winding and rewinding with super enamelled copper winding wire with same as existing turn & gauge to achieve desired including replacement of bearings complete and couple with the existing pump and testing complete as per directed by Engr-in-charge.
M&L for Terminal plate cover made of CI terminal plate for 60/120 HP centrifugal motor ,best quality including dismantling/taking out of unserviceable terminal plate of any make and type complete all as specified and directed
Attended the complaint of Star delta starter any type /make capacity 60 HP including replacement of U/S parts sch as over load relay/contracter/single phase preventer and wiring as required to made the starter serviceable condition (Note : Spare parts shall be measured and paid separatly )
Replacement of Sparekit unit for ML-4 contactor 66-110 Amps complete fixed in repairs all as specified and directed.
Replacement of Over load relay for ML-4 contactor of relay range 66-110 Amps complete fixed in repairs all as specified and directed.
Replacement of Timer switch unit star- delta starter 60 HP complete all as specified & directed.
M&L for Electronic motor protection relay to protect the motor against over load phase loss, phase unbalance, phase reversal and stalling in single compact unit with field sutaible time and current rating, suitable for 20 to 60 HP motors complete all as specified & directed.
DOL starter suitable for 3 HP to 7.5 HP electric motor, 3 phase, 415 volts, 50 c/s including dismantling/taking out of unserviceable starter of any make and type complete all as specified and directed
S&F in replacement of CI fittings for flanged pipes, bends, tapers, Tee pieces (Single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged complete all as specified and directed.
Cleaning of Semi UG sumps by scraping the inner walls of sumps & cleaning with wire brush , taking out all dirt , scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection including writing on UG Sump on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge or the capacities:-
a) 100000 Glns
b) 300000 Glns
Cleaning of Over head reservoirs of capacity 40,000 gallon 18 Mtr staging by scraping the inner walls of OHR & cleaning with wire brush, taking out all dirt, scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection and including writing on tank on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge for the capacities:-
S&F in replacement of column pipe made out of GI heavy grade size 100mm bore of 3 Mtr length each, in single piece, having MS flanges welded to both ends and including rubber gasket 5mm thick with bolt nut/washers of appropirate size/length complete all as specified and directed.
S&F in replacement of column pipe made out of GI heavy grade size 80mm bore of 3 Mtr length each, in single piece, having MS flanges welded to both ends and including rubber gasket 5mm thick with bolt nut/washers of appropirate size/length complete all as specified and directed.
M&L for Lifting of UNSV submersible pump and motor (20 HP to 45 HP) complete set along with column pipe, safety rope and cable Approx 100 mtr depth with the help of employing chain pulley block and other T&P items all as specified and directed by Engr-in-Charge.
M&L for Lowering of submersible pump and motor (20 HP to 45 HP capacity) into 100 mtr deep bore well after connecting the cable and water proof cable joint and replacing of rubber gasket, nut and bolts and washers and fixing of protection clamp all as directed by Engr-in-Charge
M&L for disconecting the submersible electric motor of 45HP from pump set, cutting and taking out the existing burnt out winding wire and re-winding motor with 'F' class PVC insulated copper winding wire of appropriate existing gauge and weight, application of insulating material, varnishing the complete and sealing the motor with water proofing compound and sealing cap including comissioning and testing complete all as specified and directed. Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.
(i) M&L, in repair/replacement of motor shaft sleeve made out of stainless steel of existing size and length complete all as specified & directed.
(ii) S&F in repair/replacement of thrust bearing of appropriate dia and size.
(iii) S&F in repair/replacement of coupling cage including bolt and nuts.
De-assembling the pump set of 45HP, Multistage (7-8) and replacing the following warn out parts by new parts & re-assembling the pump commissioning and testing complete all as specified and directed .Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.
(i) M&L in repair/replacement of intel ring
(ii) M&L in repair/replacement of Stainless Steel impeller
(iii) M&L in repair/replacement of pump shaft made out of stainless steel of existing size and length
(vi) S&F in repair/replacement of coupling with rubber bushes, slot key, bolt and nuts.
(v) M&L in repair/replacement of pump sleeves SS
M&L for dismantling the submersible electric motor of 20HP from pump set, cutting and taking out the existing burnt out winding wire and re-winding motor with 'E' class PVC insulated copper winding wire of appropriate gauge, superior quality, application of insulating material, varnishing the complete and sealing the motor with water proofing compound and sealing cap including commissioning and testing all as specified and directed..Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.
(i) M&Lin repair/replacement of motor shaft sleeve made out of stainless steel of existing size and length.
(ii) S&Fin repair/replacement of thrust bearing of appropriate dia and size.
(iii) S&Fin repair/replacement of coupling cage including bolt and nuts.
De-assembling the pump set of 20HP, Multistage (7-8) and replacing the following warn out parts by new parts & re-assembling the pump commissioning and testing complete all as specified and directed.. Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.
(i) M&Lin repair/replacement of intel ring
(ii) M&Lin repair/replacement of Stainless Steel impeller
(iii) M&Lin repair/replacement of pump shaft made out of stainless steel of existing size and length
(vi) S&F, in repair, coupling with rubber bushes, slot key, bolt and nuts.
(v) M&Lin repair/replacement of pump sleeves SS
S&F in replacement of PVC insulated and PVC sheathed, Heavy duty, submersible flat cable of copper conductor, multi stranded, 3 core of size 25 Sqmm, 1100 volts grade. Make-Fnolex/Plaza/Havells.or equivalent
Disconnecting the existing Unserviceable MCCB, taking out from the panel board and replace by S&F new MCCB 3 pole, 250 Amps, 35/36 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, thermal & adjustable magnetic setting, fixed in existing panel and connecting with existing cable, including nuts bolts and washer etc complete all as specified and directed. Make : STANDRAD / HAVELLS / ABB or equivalent
Disconnecting the existing Unserviceable MCCB, taking out from the panel board and replace by S&F new MCCB 3 pole, 200 Amps, 35/36 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, thermal & adjustable magnetic setting, fixed in existing panel and connecting with existing cable, including nuts bolts and washer etc complete all as specified and directed. Make : STANDRAD / HAVELLS / ABB or equivalent
Disconnecting the existing Unserviceable MCCB, taking out from the panel board and replace by S&F new MCCB 3 pole, 160 Amps, 35/36 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, thermal & adjustable magnetic setting, fixed in existing panel and connecting with existing cable, including nuts bolts and washer etc complete all as specified and directed. Make : STANDRAD / HAVELLS / ABB or equivalent
S&F in replacement of on load change over switch open execution type, front handle operated, 4 pole, 415 volts, 50 Hz, AC supply of 400 Amps complete all as specified and as directed. Make :STANDRAD / HAVELLS / C&S or equivalent
Dismantling of existing unserviceable motor of capacity 120 HP monoblock from foundation split opening in to the parts at works shop and repair the motor by rewinding of motor with copper winding wire of existing same gauge/size and weight supper enamelled winding wire by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots assembling complete motor oiling and greasing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.
Replacement of bearing Suitable for 120 HP centrifugal Motor
Dismantling of existing unserviceable pump of capacity 120 HP monoblock from foundation split opening in to the parts at works shop and repair the pump and greasing.gland packing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.
Replacement of bearing suitable for 120 HP Centrifugal pump sets complete all as specified and as directed.
Replacement of Brass impeller suitable for 120HP pump sets complete all as specified and as directed.
Replacement of bushes suitable for of 120 HP pump sets complete all as specified and as directed.
Supply and replacement of suitable Rubber couppling of 120 HP pump sets complete all as specified and as directed.
Dismantling of existing unserviceable motor of capacity 60 HP monoblock from foundation split opening in to the parts at works shop and repair the motor by rewinding of motor with copper winding wire of existing same gauge/size and weight supper enamelled winding wire by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots assembling complete motor oiling and greasing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.
Replacement of bearing suitable for 60 HP centrifugal Motor complete all as specified and as directed.
Replacement of SS shaft Suitable for 60 HP centrifugal Motor complete all as specified and as directed.
Dismantling of existing unserviceable pump of capacity 60 HP monoblock from foundation split opening in to the parts at works shop and repair the pump and greasing.gland packing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.
Replacement of bearing suitable for 60 HP centrifugal pump sets
Replacement of Brass impeller suitable for 60 HP centrifugal pump sets
Replacement of Suitable bushes of 60 HP pump sets
Supply and replacement of Rubber coupling 60 HP pump sets
Supply and replacement of SS couppling 60 HP pump sets
Dismantling of existing unserviceable motor of capacity 5/7.5 HP monoblock from foundation split opening in to the parts at works shop and repair the motor by rewinding of motor with copper winding wire of existing same gauge/size and weight supper enamelled winding wire by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots assembling, bearings, bushing,shaft repairing complete motor oiling and greasing and painting by synthetic enameled paints one coat after cleaning and preparing surface for painting and testing complete at site on full load all as directed by Engr-in-charge Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.
Rewinding of decrine dozing motor repair/ rewinding exisiting 1/2/.5 Hp motors. super enamelled copper wire of existing gauge including disconnection of motor and reassembling after rewinding including varnishing, paper insulation and replacement of defective parts re- installing, testing & commissioning complete all as specified and directed by Engr-in charge
M&L for Rotor assembly with bearing brackets and tolerance rings suitable for Decreen dosing pump
M&L for Single head feed rate control with shaft complete all as specified and as directed.
M&L for Injection check valve suitable for dosing pump fixed in repair all as specified
M&L for Duckwill suitable for dosing pump fixed in repair all as specified
M&L for Non return valve suitable for Decrin dosing pump complete all as specified and as directed.
M&L for Housing-UC for decrine dosing pump complete all as specified and as directed.
M&L for Pulser with pot Meter,Led&Vari for decrine dosing pump complete all as specified and as directed.
M&L for Solenoid Assembly-UC for decrine dosing pump complete all as specified and as directed.
M&L for Speed Knob for decrine dosing pump complete all as specified and as directed.
M&L for Head for decrine dosing pump complete all as specified and as directed.
M&L for Diaphragm- UC for decrine dosing pump complete all as specified and as directed.
S&F in replacement of foot valve of size 150 mm incl necessary rubber, gasket, bolts, nuts and washer complete all as directed by Engr-in-charge.
S&F in replacement of foot valve of size 100 mm incl necessary rubber, gasket, bolts, nuts and washer complete all as directed by Engr-in-charge.
M & L for preparation of old painted iron rolling setters/panels by synthetic enamel (ordenary tin) paint over finished surfaces including repair oiling & greasing of setters for smooth functioning.
M&L for cleaning of supply and distibution line surrounding area by surface excavation upto 10 cm depth incl removing shrubs,grass,miniplants and other unwanted materials and levelling complete in soft/loose soil all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for foundation of poles etc complete all as specified and as directed.
M&L for PCC 1:2:4 type C-2 using 20 mm graded stone aggregate for coping of poles etc complete all as specified and as directed.
M&L in replacement of old un serviceable Stainlesssteel spindle with gun metal gutka suitable for 150mm sluice valve of any make all as specified and directed:-
M&L in replacement of old un serviceable Stainlesssteel spindle with gun metal gutka suitable for 100mm sluice valve of any make all as specified and directed:-
M&L for Contact set comprising of 03 Nos moving contacts & 06 Nos. fixed contacts suitable for Oil mimersed star- delta starter 60 HP to 120 HP fixed in repair complete all as specified and directed.
Attending CI/DI pipe 80 mm to 200 mm dia pipe line break downs in Joint Leakage pipe broken ,flange leakage including necessary arrangement Lead joint,gascuts ,nuts and bolts , excavation and returning filling all as specified and directed:- Note: fittings and pipes measured for separatly in respective schedule
Supply only PPM test kit for water testing complete all as specified and as directed.
Supply and fixing First AID Box Including all items for installation complete all as specified and as directed.
Supply "O" Todoline solution for water testing purpose in 500 ml bottle make Nice/Glaxo or existing make complete all as specified and as directed..
ALBA AC AND REF SERVICES
divyarsh entrprise
Bhumi Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .