PROVISION OF STORE ROOM FOR GENERAL STORAGE PURPOSE ON 03 ACRES CG LAND AT CGAE BHUBANESWAR

Amount

STORE ROOM Surface excavation n.exe 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth, for foundation etc., or for shafts, wells, cesspits, manholes, pier holes, etc., n.exc 10 Sq.m on plan and getting out in hard / dense soil complete all as specified and directed.

M & L Cement concrete, type D 2, 1:4:8 ( 40 mm graded stone aggregate) in foundations, filling and mass concrete all as specified and directed.

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in floors, foundations complete all as specified and directed.

Removing excavated material (soils) exc 250 m but not exc 500 m and depositing where directed complete all as specified and directed.

M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B0 with using liquid WPC at the rate of 200ml per bag (50 kg) of cement and using necessary formwork complete all as specified and directed. (Note- Integral water proofing compound shall be measured and paid saperatly)

M&L for providing, Reinforced cement concrete (Nominal Mix) for Chajjas Type B1 1:2:4 (20 mm graded stone aggregate) complete all as specified and directed.

M&L for providing, Reinforced cement concrete (Nominal Mix) for RCC bend, Beams, cantilevers,bressummers, lintels over 1.5 m span and other similar work Type B1 1:2:4 (20 mm graded stone aggregate) complete all as specified and directed.

M&L for providing, Reinforced cement concrete (Nominal Mix) for roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20 mm graded stone aggregate) complete all as specified and directed.

M&L for providing, Reinforced cement concrete (Nominal Mix) for Columns, pillars, piers, posts and struts Type B1 1:2:4 (20 mm graded stone aggregate) complete all as specified and directed.

M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M & L Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item no 15 above but 6 mm to 8 mm dia bar

All as per item no 15 above but 5 mm dia and over upto incl 10mm dia in stirrups.

M& L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for Providing precast cement concrete type B1 1:2:4(20 mm graded aggregate) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham?fers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to match complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

M & L rendering 10mm thick on fair faces of brick or concrete wall surfaces in cement mortar 1:6 finished surfaces fair and even complete all as specified and directed.

M & L rendering 5mm thick on concrete ceiling surfaces in cement mortar 1:3 finished surfaces fair and even complete all as specified and directed.

M&L Hardcore of gauge n exc 63 mm of brocken stone or boulders deposited. Spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick plain cement concrete type D2 (1:4:8) 40mm graded stone aggregate floor sub base complete all as specified and directed.

M&L for 40 mm thick plain cement concrete type B1 (1:2:4) 20mm graded stone aggregate floor finishess with using extra cement complete all as specified and directed.

M & L for Screed bed or bedding layer of cement mortar in 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cememnt slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for machine cut kota stone slab 20-25 mm thick as in riser of steps, skirting, dado and pillar over & including 10mm cement mortar backing in cm (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Supply only 5.0mm thick sheet glass, odinary quality in square exc 0.5m in each pane complete all as specified and directed.

Supply only 5.0mm thick sheet glass, odinary quality in square n exc 0.5m in each pane complete all as specified and directed.

Extra over sheet glass, ordinary quality,if sheet glass is ground or obscured orfrosted, on one side complete all as specified and directed.

S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two No. 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling and providing 100mm long MS screws with PVC fasteners complete all as specified and directed.

S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2020 print) complete all as specified and directed.

S & F for 125 mm size Butt hinges extruded brass with mild steel hinge pin bright polish and fixed type B-11 complete all as specified and directed.

S & F for 300 mm long (Length of bolt) brass sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S&F for extruded brass handles, fabricated type, anodized 125 mm size complete all as specified and directed.

S & F for 125 mm long (Length of bolt) brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolt complete all as specified and directed.

S&F of roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, tubular channel or flat sections) including distance pieces, cleats etc.complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F of plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment ( confirming to Fe-410-W(Gde-E-250) quality-A) complete all as specified and directed.

S&F mild steel bolts of dia exe 12 mm n.exe 20 mm purpose made.with hexagonal or square head one end and screwed the other, or screwed both ends;each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm longRemoving excavated material (soils) exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point. complete all as specified and directed.

S&f pre-painted galvalume aluminiun zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C-2(using 40 mm graded stone aggregated), as in plinth protection complete all as specified and directed.

Supply only water proofing compound (liquid),ISI marked complete all as specified & directed.

M&L three coats of white wash to newly plastered surface of ceiling incl preparation of surfaces complete all as specified and directed.

M&L for preparing surfaces plastered or unplastered and apply three coats of white wash for internal preparing new surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint. complete all as specified and directed.

M&L preparation of plastered surface of wall and applying two coat of oil emulsion distemper over a coat of alkalic resistant priming paint complete all as specified and directed.

Material & Labour for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide paint of steel new surface complete all as specified and directed

M&L for two coats of synthetic enamel paint over one coat of red oxide surfaces of any description, n.exc 10cm in width or girth of new steel surfaces complete all as specified and directed.

M&L coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. premium quality, Gr-1 set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layers in cement mortar (1:4) complete all as specified and directed.

M&L colour glazed ceramic coloured tiles 300mmx200mmx7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc to match with and including 10 mm thick screed bed or bedding layers in cement mortar (1:3) complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern),white (excluding flushing cistern and pipe) complete all as specified and directed.

S&F PVC valveless, syphonic action type low level flushing cistern, white, 10 ltrs capacity, including all fittings and flush pipe, PVC connection pipe, inlet ball valve, float and handle including brackets complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc with CP waste coupling of 32mm bore, PVC waste pipe of 32 mm dia cast iron bracket & 15 mm bore PVC connector pipe of 450mm long complete all as specified and directed. (Note : Waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets & PVC connector pipe etc shall be deemed to be included in the quoted rate)

S&F chromium plated Bib taps 15mm bore cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F stop valves 15 mm bore cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.

S & F of health faucet with wall 8mm dia,1.2 mtr long flexible tube & wall hook for EWC including hinges with complite fitting, complete all as specified and directed. Make :Parryware (E8372A1) or eqivalent as approved.

S&F soap dish,vitreous china white ,approximate size 160x160x90 mm fixed with CP screw complete all as specified and directed.

S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F 15mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.

M&L 100mm dia outlet of Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed

S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed

S&F 110mm bore PVC (SWR) junction single Tee equal or unequal complete all as specified and directed

S & F 500 litres capacity rotational moulded polyethylene water storage tanks with lids (multi layer minimum 3 layered) (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20 mm bore medium grade, galvanised iron with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F 15 mm bore medium grade galvanised iron with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring pipe where making good to facing required and pointing in cement mortar 1:3 etc. in Brick wand and concrete. Walls & cutting not exceeding 10 cm girth complete all as specified and directed.

S&F 15 mm bore gun metal ,globe or gate valve,with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Cutting 150mm dia pipe into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

S&F 110mm bore PVC(SWR) vent cowl complete all as specified and directed.

M&L rendering 10mm thick cement mortar 1:4 on concrete surfaces as in roof treatment using WPC @3% by weight even & smooth without using extra cement complete all as specified and directed. (NOTE: WPC measured and paid separetly)

S&F PVC connection pipe 15mm size & 450mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.

M&L powdered coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

M&L powered coated anodised aluminium sliding window and ventilator shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. for fixing glass panes in frames & including fixing of glass pane complete all as specified and directed. (Note : (i) Glass Pane shall be measured & paid separately as supply only. (ii) Minimum thickness of powder coating 50 micron.)

Supply only 5.5 thick sheet glass, odinary quality in square n exc 0.5m in each pane complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed

S&F aluminium handle 150 mm long extruded section complete all as specified and directed.

S&F aluminium barrel tower bolt, 150 mm long, extruded section complete all as specified and directed.

S&F cold rolled mild steel butt hinges 100 mm long, medium weight complete all as specified and directed.

S&F 18 to 20 mm thick granite slab, machine cut, laid over screed bed, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including cutting and polishing types with and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Providing & Fixing false ceiling at all height with GRG(Glass Fiber Reinforced Gypsum) false ceiling tiles of size 575x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (Part 4 )- 1970 and light reflection of 85% (minimum) to be laid in true horizontal level suspended on their interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main -T runners of size 15x32mm of lenght 3000mm, cross-T of size 15x 32 mm of lenght 1200mm and secondary intermediate cross-T of size 15x 32mm of lenght 600mm to form grid module of size 600x 600 mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm)i.e. 50 mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm lenght and L-shape level adjuster of size 85x 25x2mm. Galvanized iron perimeter wall angle of size 24x 24x 0.40mm of lenght 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. with semi perfotrated 12 mm thick mirco tegular edged GRC false ceiling tiles complete all as specified and directed.

SEWAGE DISPOSAL PCC 1:4:8 type D2 type (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

Concrete bed to drain pipes of size 150 mm bore packingunder and haunching against the sides of pipes after theyare laid and fitted in cement concrete, Type C2, 1:3:6,using 40mm graded stone aggregate complete all as specified and directed.

Brick work with Fly ash Modular bricks straight or curvedin plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

PCC 1:2:4, Type B–0, using 12.5 mm graded stone aggregate as in coping including use and waste of formwork and finishing the exposed faces of concrete evenand smooth without using extra cement complete all as specified and directed.

PCC 1:2:4 type B2 (using 40mm graded stone aggregateas in surface channels/benching and drains complete all as specified and directed.

Rendering 15 mm thick in CM 1:4 on fair faces of brick/concrete wall surfaces of any description using WPC and finishing surfaces even and smooth without using extra cement complete all as specified and directed. (Note: WPC shall be measured and paid separately under respective items in this schedule)

Supply only integral water proofing compound [ISI marked] of approved make.

Precast Cement Concrete 1:2:4, Type B–1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc],chullah hoods, Chajjas, water troughs, mangers, Shelvesand similar articles with plain faces including formwork,set in cement mortar 1:4 complete all as specified and directed.

Reinforcement using High Strength Corrosion ResistantDeformed TMT Bars of Grade Fe–500D of 5mm dia andover up to 10mm dia, required in stirrups, spacers &binders, cut to length, bent to shape required, bindingwith & including mild steel wire (annealed) not less than0.9mm dia or securing with clips quality complete all as specified and directed.

Reinforced concrete pipes, class NP2, 150 mm dia laid in trenches and jointed complete with collars complete all as specified and directed.

150mm dia Salt-glazed stoneware drain pipes, class A, laid in trenches and jointed complete all as specified and directed.

INTERNAL ELECTRIFICATION Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and directed.

(a) One light point & Fan point controlled by one way switch.

(b) One 3 pin socket outlet, 5/6 amps, on independent board.

All as per item No 103 (a) here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed.

Supply and fix ceiling rose, surface bakelite,65 x 50mm, three terminals all as specified and directed.

S&F Modular White Cover Plate with Frame, 2 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 3 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 4 Module complete all as specified and as directed.

S&F Modular Metal Flush Box 2 module complete all as specified and as directed.

S&F Modular Metal Flush Box 3 module complete all as specified and as directed.

S&F Modular Metal Flush Box 4 module complete all as specified and as directed.

Supply & fix LED tube light 20 W Fitting Smart Bright extruded aluminium batten available in 4 ft run length with Lumen efficacy 125 lm/watt and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. Make Crompton No. CCS-100-2--65-HL2-DP-NWH (4 ft) Eqv Crompton/ Havells/ pHILIPS

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing of Square Recessed mounted LED of full lit luminaire with glare free uniform illumination of capacity 24/36 watt (2ftx2ft) PDC white finish aluminium housing with high translucent frosted plastic diffuser with efficacy of 100lm/w complete all as specified and as directed.( Make/Model No:-LCTLRNE-24-FO-CDL(POLARIS NIO-I) of Crompton or equivalent of Philips & Wipro.

S&F MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified.(Make : L&T/Legrend/Havells

Supply and fix MCB single pole and neutral, 240 volts, 32 to 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed. (Make : L&T/Legrend/Havells

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series all as specified and directed. Make :(Make : L&T/Legrend/Havells

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

Supply and fixing of GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata)

Supply and fix heavy duty exhaust fan of 300 MM sweep,Turbo Force SP (Heavy duty ) single phase 230/240 Volts,, AC supply, 1400 RPM complete and making holes with louvered shutters including mounting frame and connecting the fan to celing rose including provision of three core flexible copper conductor cable of size 1.5 Sqmm copper including to inside out surface & white wash etc with not less than 0.5m long to connection complete all as specified and directed. Make-Havells/Usha/Khaitan/Orient

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Complete all as specified and directed Make: Havells/ Usha/Crompton/orient

Supply and fixing wall mounted fans Sweep (mm) : 400 Air delivery : 5700 M3/Hr RPM : 200 Oscillation & speed control by pull cord mechanism , Specially designed motor gives high air thrust @ 2000 RPM complete accessories Complete all as specified and directed Make: Havells/ Usha/Crompton/ orient

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 2.5 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 2.5 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Supply & fixing Building security light fitting,new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 10 watt.including provn of necessary connection complete.(Make/ Model:- Crompton(ASTRA NEO), Cat No . LSTS-25-CDL-M or equivalent make of Phillips/Havells/ Bajaj/Wipro)

EXTERNAL ELECTRIFICATION Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and as directed.

S&L well burnt sub class ‘B’ bricks (using old size brick) laid in trenches above sand cushioning for cable protection complete.

Removal of excavated soil to a distance not exceeding 50 Mtr depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2.0 core complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

M & L for cutting the existing concrete/bituminious road surface width n.exe 30 cm and making good the surface with 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate finished even and fair complete over 100mm thick PCC 1:4:8 type D2 using 40mm stone sggregate over consolidated/rammed earth surface all as specified and directed

M&L GI pipe light grade with all fitting laid in trenches and under road/floor/culverts along with pole etc 50mm bore. Make : Tata/Jindal/Surya

M/s Bapujee Builders and Traders

HARAGOURI SUPPLIERS

NARESH KUMAR BEHERA

M/s- U. TECH SERVICE