Loading
Loading…
Loading…
Tender Value
₹27.2 L
EMD Value
₹54,000
Closing Date
26 Aug 2026, 3:00 pm2d left
Director
IWAI, Pandu Port Complex, Pandu, Guwahati-12
Dry-Dock repair of MV JFR Jacob at NW-2 for the year 2026- 27
2026_IWAI_921709_1
IWAI/GHY/MV JFR Jacob/4(169)/2025-26
Open Tender
Marine Works
Works
60 days
NW-2
As per tender document
2 documents required · 2 mandatory
₹5,900
IWAI FUND PLAN
₹54,000
11 Aug 2026
11 Aug 2026
27 Aug 2026
12 Aug 2026
26 Aug 2026
12 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Blocking and unblocking including mooring charges for inspection then repair of vessel. Blocking to be done in sufficient height for underwater inspection, scrapping, chipping, wire brushing, cleaning, repairing and painting etc. Unblocking in suitable site as required as per direction of EIC/Surveyor. | 1 | Comp. Job | - | - |
| 2 | Ultrasonic thickness gauging to be done of hull/bottom shell, deck plate & LWL ship side plate, etc. for checking of thickness and test report to be submitted. The same will done through IRS approved TM firm as required as per direction of EIC/Surveyor. | 600 | Spot | - | - |
| 3 | Cropping & renewal of damaged/wasted under water, deck plate, air vents, brackets, angles, stiffeners, railings, side fender, railing's chain, railing's flatbar and inside tanks plating etc as required after ultrasonic testing & its report as required as per direction of IWT Surveyor/ EIC.
(i) Class certificates to be submitted in original for all materials used for repair. Alternately, check testing of the material to the attending IRS surveyor's satisfaction to be done)
(ii) IRS approved welding procedures, welders and consumables shall used in repair.
(iii) IRS approved firm shall done non destructive test of the repair(UT/RT), as required as per recommendation/ direction of EIC/Surveyor. | 1,500 | Kg | - | - |
| 4 | Under water hull plate & side plate to be scraped & chipped & wire brushed from keel to LWL to remove fouling and paints and made suitable for inspection / painting. Painting of hull plate & side plate to be done by 3 coats (1 coat primer & 2 coat paint) from keel to water level as required as per direction of IWT Surveyor/ EIC. | 500 | Sqr. Mtr. | - | - |
| 5 | Chipping, wire brushing and cleaning inside of all tanks, voids and space with all interior item like angle & frame etc. to be done with one coat of primer followed by two coats of existing color anti- corrosive marine, as required as per direction of EIC /Surveyor | 250 | Sqr. Mtr. | - | - |
| 6Checking of Cathodic Protection Anodes as per arrangement and replaced the damaged anode as required as per direction of EIC/ surveyor. | |||||
| 6.01 | Labour Charges | 1 | Comp. Job | - | - |
| 6.02 | Cost of spares/material (Actual +10%) | - | - | - | - |
| 7Sea chests, mud boxes and strainers to be opened, cleaned and boxed back after renewal of gasket and SS nut bolt etc as required as per direction of EIC/Surveyor. | |||||
| 7.01 | Labour Charges | 1 | Comp. Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
BOQ_968587.xls
BOQ • 0.24 MB
Tenderdoc_JFR_Jacob.pdf
Tender Documents • 1.57 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].