SPECIAL REPAIR TO OT OF BLDG NO P1 AT MH DANAPUR IN AGE BRII UNDER GE DANAPUR CANTT

Amount

Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any mortar and removing rubbish off permises all as specifed and directed

M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.

M & L for 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.

M&L for 10mm thick light shade vitrified ceramic tiles double charged in floors n. exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles complete all as specified & directed.

M&L for 10mm thick Dark shade vitrified ceramic tiles double charged in floors, n. exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles complete all as specified & directed.

M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:6) etc complete all as specified and directed.

M/L for 18-20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window-cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Note:- Edges of slab shall be rounded off and a hole for gas pipe shall be made on cooking plateform.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premisses complete all as specified and directed.

M&L for 10 mm thick plaster in cement mortar 1 : 4 as a backing coat for fixing of wall tiles complete all as specified.

M & L for 450x300 x7 mm to 350x275x7 mm thick glazed ceramic tiles (Digital pattern) including highlighter colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified and directed.

M & L for Glazed ceramic coloured tiles of size 300 mm X 200 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

Dismantling of false ceiling of any description, any thicknes including cover fillets and frame work complete all as specified and directed by the Engr-n-Charge

M&L for anodised aluminium snap grid frame work with supporting hangers comprising of GI wire 4 mm dia with J hook, nuts/bolts etc for false ceiling with size of grid 605 x 605 mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg per RM and wall angle 23.5 x 26.4 x 1.4 mm weighing 0.191 Kg per RM respectively complete all as specified and directed. Make : Armstrong, Hunterdouglas

M&L for 8 mm thick E-board of size 600 x 600mm fixed to aluminium snap grid frame work as in ceiling flat or sloping conforming to IS -14862 complete all as specified & directed. Make : Armstrong, Hunterdouglas

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete in parapet including necessary scapfolding.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided .

M&L for cutting openings of brick wall built in cement mortar or cement lime mortar, through brick wall for door, window and other openings or enlarging existing openings, converting window into door opening, etc or cutting out defective brick work for under pinning, including removing rubbish from site and all as directed by Engr-in-Charge.

M&L for forming jambs in Cement mortar 1:4 to openings (to foregoing item) including cutting, toothing and properly bonding into old work. also facing, jointing and pointing to match existing work, complete all as specified and as directed by Engr-in-Charge.

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M & L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked.

M & L for roller application of two coats of OBD over a coat of primer on newly plaster wall surfaces incl applying with 1 mm thick Birla / JK Putty of surfaces complete all as specified and directed.

M&L two coats of cement base paint over and including a coat primer on wall including preparation of newly plastered surfaces.

M&L for two coats of weather proof paint on newly plastered surfaces over a coat of primer including preparation of surface complete all as specified and as directed by Engr-in-Charge.

M&L for repair 18/19 mm thick pre laminated particle board, exterior grade, pre laminated both side with decoractive choice lamination and other side white lamination for cupboard shutters fixed with nails, hinges all as specified. Make : Kit Ply / Novapan / ECO Board / Green Ply

S&F L type hinges (Bihari Hinges) of stainless steel all as specified

S&F 100 mm size extruded brass handle, fabricated type polished fixed to board complete all as specified and directed.

S&F in repair 4 lever brass cupboard lock grade-I size 65 mm etc complete all as specified and directed.

S&F magnet catches fixed with steel screws in cabinet brass body complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

All as per above item No 36.00 but exc 1.5 Sqm but n.exc. 4 Sqm each.

S&F of IInd class HW plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed.

S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for preparation of old wood or wood based material not otherwise described over 10 cm girth and applying one coat of synthetic enamel paint etc complete all as specified and directed by EIC

S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Make : Raj shree or Equivalent

S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.

S & F 150 mm long Aluminium anodised barrel tower bolts of extruded section.

S & F 125 mm long Aluminium handles of extruded section, fabricated type and fixed

S & F 300 mm long mild steel CP sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.

S & F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters upto 700mm in width and of weight n. exc 35 kg etc complete all as specified and directed.

S&F 150 mm overall length cover plate door stopper of brass body and tongue with hard drawn steel spring.

S&F powder coating aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. Make : Jindal/Hindalco/Ajit India

S & F powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667 Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Bottom rail of size 100x 44.45x 1.18 mm @ 1.69 Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 6 mm thick Aluminium composite panel (ACP) with glazing clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc complete all as specified and directed

S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc complete all as specified and directed

M & L double action floor spring for aluminium doors hydraulically regulated made up of minimum1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar

S & F 5.0 mm thick Sheet glass ordinary quality fixed with rubber gasket and powder coated aluminium beading to aluminium frame exc 0.5 Sq. M in each pane complete all as specified and directed.

S & F 4.8 mm thick Sheet glass ordinary quality fixed with rubber gasket and powder coated aluminium beading to aluminium frame not exc 0.5 Sq. M in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and as directed by Engr-in-Charge.

S&F in repairs powder coating aluminum partition wall of aluminum section 100mm x 44mm x 2mm thick frame rectangular section and panel of PVC sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminum beading around length including necessary fixing arrangement for bottom and top member of aluminum frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre all as specified and directed by Engineer-in-Charge (Note : Cost of PVC panel or prelaminated board and sheet glass shall deemed included in the unit rate of this item )

Taking up 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.

S & F tubes medium grade galvanised iron with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed.

Taking up 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.

S & F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 20mm bore etc complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth complete all as specified and directed.

S&F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

S&F in repair 15 mm dia nipple suitable for HDPE water tank (min weight 38 gms) complete all as specified and directed

S&F in repair 20 mm dia nipple suitable for HDPE water tank (min weight 45gms) complete all as specified and directed

S&F in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high desity plastic ball srewed for iron pipe and fixed (minium weight 15mm-142gms) complete all as specified and directed

S&F in repair Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed .

S&F in repair Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

Supply & fixing in repair vitreous china wash basin, light colour Oval shape as fitted on slab or flat back size 550x400mm excluding tap, waste, chain etc. Make: Hindware/Parryware (Superfine)/Cera (Ist quality)/Jaquar

S&F vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed.

S&F in repairs CP bottle trap (heavy) 32mm. Make: Hindware/Parryware/ Cera/Jaquar

S&F 32mm waste Coupling brass, chromium plated for glazed ware sinks, basins,etc. With long screwed shanks and fly nuts,flange end bedded in red lead cement and other end. Make : Hindware/Parryware/Cera/Jaquar

S&F in repair 15 mm dia Brass CP basin mixer for mixing hot and cold water screwed down for iron pipe elbow type. Make : Prayag/jaguar/Parryware/Cera/Jaquar

S&F in repairs light colour vitreous china washdown water closet pan (pedestal pattern) fancy type including built in vitreous flushing cistern dual flush type of total capacity 10 litrs including PVC white seat cover complete all as specified. Make -Hindware/Parryware/Cera/Jaquar

S&F in repair CP Health faucet with 1.5m tube and hook : Cera/Hindware/Jaquar

S&F in repairs, vitreous china squatting pan Orissa pattern size 580mmx440mm white with integral foot rests (exluding flushing cistern and flush pipe) including lime /cement concrete bedding all as specified and directed by Engineer-in-Charge. Make Parryware(Superfine), Cera (Ist Quality), Jaquar/Essess

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall , complete all as specified and directed.

S&F in repair vitreous China white urinal flat back (Long) 600 to 680mm x 400mm to 420mm x 375 to 380mm with 32mm dia CP casted bottle trap, 32mm dia brass CP dome waste, 32mm dia brass CP spreader union for dishcarge pipe 32mm complete with necessary fittings. Make - Prayag/Jaquar/Parryware/Essess

S&F Urinal spreader of chromium plated for fixing with 15 mm dia pipe etc complete all as specified and directed by EIC

S&F in repair CP brass stop valves/angle valve, fancy type, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions. Make : Prayag/Cera/Jaquar

S&F in repair CP brass 15mm bib tap fancy elbow type ,long body concealed tytpe with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Make : Prayag/Cera/Jaquar/Nova

S&F in repairs PVC connection 15mm dia size and 600 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed. Make - Prayag/Jaquar/Cera

S&F in repair grating doom 125 mm dia with waste hole of chromium plated.

S&F PVC (SWR) 75 mm bore floor trap with grating including jointing with solvent cement complete all as specified. Make : Finolex/Supreme

Taking down CI / PVC (SWR) pipes of any size or pattern including all fitting fixed to wall, floors, etc all as specified

S&F PVC (SWR) 110 mm bore 'P' trap or 'S' trap complete all as specified.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete

S&F in repairs 100/110mm dia stack clampsmade of 50mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified

S&F PVC (SWR) 110 mm bore bends of any radius with door/without door.

S&F PVC (SWR) 110 mm PVC junction single (Single 'T') equal or unequal complete.

S&F in repairs 40 mm outer dia of CPVC pipes class I, SDR 11 on walls/ceiling or laying in floors including fixing of all fittings complete all as specified.

S&F in repair of cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as specified and directed . Make - Prayag

S&F in repair toilet paper holder brass, chromium plated all as directed

S&F in repair towel rail 600 mm long of CP fixed with and including chromium plated brass screwed and wooden/plastic cleats all as specified

S&F in repair cp towel ring 150 mm dia fixed with chromium plated screws complete all as specified

S&F in repair soap dish, vitreous china white, approximate size 160x160x90 mm complete all as specified

S&F glass shelf wall corner size 230 mm with all fittings/brackets complete all as specified and as directed by Engineer-in-Charge. Make : Jaquar/Cera

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level)

M&L for 25 mm thick PCC 1:2:4 type B0(Using 12.50 mm graded stone aggregate) in sub base of floorings rough finished even and fair

M&L for durastone heavy duty coloured vitrified tiles 400x400x9-10 mm thick exterior grade set and jointed with neat cement slurry and painted in coloured or white cement to match complete all as specified.

M&L for mild steel tubular pipe of medium grade (ISI marked) of any sizes cut to length, fixed to floor for post and wall for tubular trusses(framed), purlins, rafters etc complete all as specified. Make : Jindal/TATA/SAIL

S&F for Joist, channel, angle, or tee sections, fixed independently, plate grider or single stachions built up of one beam or channel section with hanger plate braket cleat without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length including welding indicated) etc complete as all specified.

M&L for cutting holes into or through brick walls built in cement mortar and wall of cement concrete for inserting of rolled mild steel structural steelsection and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required all as specified

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete all as specified and directed. NOTE:- 1. The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed. 2. The work shall be carried oiut by authorised applicator of Manufacturer. 3. Independent Testing of membrane shall be carried out from Govt Engg College/ NABL approved Lab before laying.

Taking down existing water proofing treatment / PCC padding / roof tiles etc including cement mortar of any description and disposal rubbish outside MD land and hacking for keys, scrubbing down with water complete all as specified and direcetd.

M&L for 10 mm thick plaster in cement mortar 1 : 4 as a backing coat for fixing of wall /floor/roof complete all as specified.

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete.

M & L for preparation of newly plastered surfaces of ceiling and applying 1 mm thick wall care putty including preparation of new surface complete.

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915mm x 460 mm, bowl size 410mm x 330mm x 160 mm.

S&F in repair CP stainless steel surgical scrub station with cp tap bend type and 1.5m tube and hook complete all as spd and directed.

M&L for surface dressing not exceeding 15 cm deep in any type of soil and removing of materials from site complete all as specified as directed.

Excavation in trenches in soil n.exc 1.5 m wide and n.exc 1.5m in depth for foundation, pier holes etc n exc 10 sqm on plan and getting out in any type f soil complete all as specified as directed.

Removing surplus excavated material (SOIL) to distance exc. 50 m but not exc. 25 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for soiling (or sub base) of old size well burnt bricks one layer laid flat including filling of interstics and roolling complete all as specified and directed..

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for 100 mm thick cement concrete, 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed..

M & L for providing reinforced cement concrete nominal Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for forming contraction (Dummy) joint 100 mm deep x 10 mm wide filling with sealing compound Grade 'B' complete all as specified and directed..

Excavating in post holes (or similar holes) each n exc 0.5 cum in any type of soil getting out including filling of with compacteted soil complete all as spd and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in filling of post holes etc complete all as specified as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per above item No 129.00 but plain sheet as in ridge fixed with self tapping screws complete all as specified and directed..

Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes but providing new hylum sheet 2.8mm thick for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed.

All as per item no 133.00 above but one bell point complete all as specified and directed.

All as per item no 133.00 above one 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified and directed.

All as per item No 133.00 above one 5 Amps socket out let point on independent board controlled by one switch complete all as specified and directed.

All as per item No 133 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dollycomplete all as specified and directed.

All as per item No 133.00 above but wiring with 4.0 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dollycomplete all as specified and directed.

Supply and fix Modularswitch , 1 Module single pole one way 10 Amps. Make- Anchor/Roma/Legrand/Crabtree

Supply and fix modular socket , 2 Module 6 Amps 240 volts Ac 2/3 pin combined suitable for inserting 2 pin 5 Amps/ 3 pin 5 Amps plug top all as specified and directed at site.Make- Anchor/Roma/Legrand/Crabtree

Supply and fix Modularswitch , 1 Module single pole one way 16 Amps. Make- Anchor/Roma/Legrand/Crabtree

Supply and fix modular socket , 2 Module 6/16 Amps 240 volts Ac 6 pin combined suitable for inserting 3 pin 6/16 Amps plug top all as specified and directed at site.Make- Anchor/Roma/Legrand/Crabtree

Supply and fixing Modular bell push single pole, 6 Amps, 1 module 240 Volts, flush type complete all as specified and directed.

Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply and fixing for batten/angular fittings complete all as specified and directed.

Supply and fix LED Lamp 7/8 watt complete all as specified and directed.

Supply and fixing for modular fan step regulator 120 watt complete all as specified and directed.

Supply and fixing Bell, AC 240 Volts,single pole complete all as specified and directed.

Supply and fixing double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed .

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply and fixing MCB TPN 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and one nos LED rod 18/20 Watt all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified & directed Make- Havells /Bajaj/Philips/ CG.

Supply and fix LED recess mounted luminaire suitable for 2x2 ft grid ceiling with system wattage of 40 watts , 3600 lumnes, CCT 6500k , CRI > 80 , IP 20 , complete incl PVC sheathed 1.0 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting (Make-CG of Catalogue No. LCTLRN-36-FO-CDL, or equivalent specifications model of make- Philips/OSRAM/Wipro/GE

Taking down of seviceable/unserviceable existing electric ceiling fan after minor repair or servicing refixing with two core flexible copper wire connection upto ceiling rose or connector complete all as specified & directed

Supply and fixing of down rod for ceiling fan made out of 15 mm dia MS pipe complete with holes, and MS strip clamp with slotted or threaded upto 1.5 m long all as per site requirement complete all as specified & directed

Supply and fixing plasic body air fan / ventilator with louver 250 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable upto ceiling rose complete all as specified and directed .

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor, drawn in existing pipe but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.

M&L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles. Pipe hooks,couples and lock outs etc 25 mm external dia of pipe fixed on surface mounted complete and making good disturbed surfaces in repairs all as directed.

Supply and fixing in repair of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 15 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete

Taking down carefully copper pipes of any size including complete fittings etc, and making good the disturbed surface of walls complete all as specified and directed.

Supply and fixing isolation valves 15mm are to be ball valves with stainless steel balls and PTFE or Teflon seals. They shall be suitable for working pressure of 10.2 Kgs/sqcm gauge. Valve shall be fitted into the pipe line by means of capiliary hard soldered joint containing silver, it should be open/closed with help of handle with roatation of 90 degree complete all as specified and directed by Engr-In-Charge.

Supply and fixing isolation valves 22mm are to be ball valves with stainless steel balls and PTFE or Teflon seals. They shall be suitable for working pressure of 10.2 Kgs/sqcm gauge. Valve shall be fitted into the pipe line by means of capiliary hard soldered joint containing silver, it should be open/closed with help of handle with rotation of 90 degree complete all as specified and directed by Engr-In-Charge.

Supply and fixing medical grade copper pipes of size 22mm x 0.9 mm for medical gases, complete with elbows, flanges, specials, other fittings and steel support, the copper pipes should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased materials confirming to BS-EN 1057/13348 of copper pipe with colour coded complete all as specified and as directed.Make Mexflow/Metalco

Supply and fixing medical grade copper pipes of size 15 mm x 0.9 mm for medical gases, complete with elbows, flanges, specials, other fittings and steel support, the copper pipes should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased materials confirming to BS-EN 1057/13348 of copper pipe with colour coded complete all as specified and as directed.Make Mexflow/Metalco

M/s KUMAR ENTERPRISES

M/S Harsh Traders

RC GUPTA AND SONS

J K CONSTRUCTION

M/S SHEO KUMAR SINGH AND SONS

MS JAGDAMBA ENTERPRISES