ADDN ALTN TO UNIT SHOPS INCLUDING COVERED SHED WITH ALLIED WORKS AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Demolition of cement concrete (unreinforced) in roofs, floors other than ground floors beams staircases, landing, chajjas and similar suspended work complete all as specified and as directed by Engineer-in-Charge.

M & L for 25MM thick (average) PCC type B-0 1:2:4 (12.5 mm Graded stone aggregate) as in roof padding complete all as specified and as directed by Engineer-in-Charge.

M &L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortal (1.4) with water proof compound for external surface finished even & smooth all as specified and directed by Engr-in-charge. Note:- WPC will be measured and paid separately.

M & L for APP based polymeric membrane minimum weighing 3.50kg/sqm and 3mm thick reinforced with polyster non woven fabric (weight not less than 160gsm/sqm) laid on surface applied with bituminous primer @0.25 ltr per sqm, by torch application with overlap 100mm on the traverse direction and 75mm on longitudinal direcion on existing RCC roof surface and applying one coat of aluminium paint over top surface of membrane @ 0.11 ltr/sqm complete all as specified and as directed by Engr-in-charge.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm each but n exc 4 Sqm, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

M & L cutting hole in exc half brick but n exc one brick walls in cement mortar for inserting holdfast and making good dismantled portion in cement concrete 1:2;4 type B-1 as required and as directed by Engr-in-charge.

Powder coated aluminium grill ( transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.

Powder coated (Minimum thickness of powder coating 50micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-charge..

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge etc complete all as specified and directed.

S&F 5.50mm thick tinted sheet glass of ordinary quality and glazing with rubber in squares exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-charge.

S&F stainless steel alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engr-in-charge.

S & F Mirror polished Machine cut kota stone slab high gloss finish flooring 18-22mm thick laid over over cement screed in CM 15mm thick, (1:4) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.

M & L Mirror polished Kota stone slab 18-22mm thick in skirting, dado laid over cement screed in CM 10mm thick, (1:3) and jointed with with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and bull nosing complete all as specified and directed by Engr-in-charge.

M & L Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including chemfering and rounding of edges complete all as specified and directed by Engr-in-charge.

M & L for PCC Cement concrete type C2, 1:3:6 (40mm graded aggregate) as surface channel and drains all as specified and as directed by Engr-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as specified and directed by Engr-in-charge.

Material and labor for P.C.C type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in sub base floor and plinth protection complete all as specified and as directed by Engr-in-charge..

M & L for PCC 1 : 2:4 type B-1 as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed by Engr-in-charge.

M & L for cutting out bricks, forming toothing for and bonding new into old work including value of new materials entering old walls and jointing and pointing (measure on vertical face in contact with old wall only) in CM 1:4 and including 15mm thick plastering in CM 1:4 and pointing etc complete all as specified and as directed by Engr-in-charge.

M & L for new size brick work with fly ash bricks straight or curved on plan exc 6m mean radious built in CM 1:6 etc complete all as specified and as directed by Engr-in-charge.

M & L for use and waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finish concrete surfaces etc all as specified and as directed by Engr-in-charge.

M & L for RCC(nominal mix) type B0 1:2:4 (12.5mm graded aggregate) for chajjas etc all as specified and directed by Engr-in-charge.

Chequered cement concrete tiles 30cm x30cm x 25mm thick,with gray cement and pigment set, jointed and pointed in neat cement slurry in floors etc complet all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engr-in-charge.

M &L for Rendering 15mm in two layer (10+5)mm, top layer with WPC on fair faces of brick work or concrete surfaces in cement mortal (1.4) with water proof compound for external brick surface finished even & smooth all as specified. Note:- WPC will be measured and paid separately.

Supply only Integral water proofing compound.

M &L for Rendering 15 mm thick other than fair faces of brick work or concrete surfaces in cement mortal (1.6) for internal brick with even & smooth surface all as specified and directed by Engr-in-charge.

M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engr-in-charge..

M&L for preparation of old treated steel surfaces of any description over 10cm width or girth, priming with red oxide zinc chrome primer and applying one coat of synthetic enamel paint of 1st grade quality complete all as specified and as directed by Engr-in-charge.

M&L for cutting out cracks to V-section in existing concrete surfaces, cleaning out,wetting,grouting with cement mortar (1:3) complete all as specified and as directed by Engr-in-charge.

M&L for prepartion of new plaster surface of wall (External) and apply two coats of acrylic exterior water proof emulsion paint over a coat of primer complete all as specified and directed by Engr-in-charge.

M&L for preparation of existing surface of wall (External) and applying two coat of acrylic exterior water proof emulsion paint complete all as specified and directed by Engr-in-charge.

M&L for newly plastered surface of wall internal appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming paint over 1-2 mm thick coat of wall care putty etc complete all as specified and as directed by Engr-in-charge.

M&L preparation of old plastered surfaces of internal wall and applying two coats of distemper oil emulsion paint over 1-2 mm thick coat of wall care putty on wall all as specified and directed by Engr-in-charge.

Material and labour for applying one coats of white wash on old ceiling including preparation of old ceiling surfaces including all necessary scaffolding etc complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (reinforced) in slabs chajjas beams etc complete all as specified and directed by Engr-in-charge..

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge.

ditto, as above but 5mm dia and over upto including 10mm dia in stirrups, spacer and binders complete all as specified and as directed by Engr-in-charge.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engr-in-charge.

Removing excavated material/old debries n exc. 50 mtr and depositing where directed by Engr-in-charge.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out returing filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm in soft/loose soil complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:4:8 type D2 using 40mm graded aggregates in foundation filling and mass concrete as in lean concrete complete complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregates in foundation filling for steel post and mass concrete as in lean concrete complete all as specified and as directed by Engr-in-charge.

M&L Roof trusses (framed), trussed, purlins, water staging, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including necessary welding, fabrication Fe-410W(GdeE-250) quality B complete all as specified and as directed by Engr-in-charge.

M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc.for post (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming Fe-410W(GdeE-250) quality B complete all as specified and as directed by Engr-in-charge.

S&F Plates of Fe 410W (Gde E-250) (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment to base of column, steel post and truss etc complete all as specified and as directed by Engr-in-charge..

S&F 12 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed by Engr-in-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engr-in-charge.

M&L hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and as directed by Engr-in-charge.

M&L for 100 mm thick cement concrete type C-2 (1:3:6) using 40mm graded aggregate as in base floor complete all as specified and as directed by Engr-in-charge.

M&L Non-skid colour ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floors set and jointed in cement slurry and pointed in white or colour cement to match existing surfaces complete all as specified and as directed by Engr-in-charge.

Material and labour glazed ceramic tiles of size 450mm x 300mm x 7-8mm thick coloured tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface complete all as specified and as directed by Engr-in-charge.

Material and labour for screed bed or bedding layers of 15 mm thick cement mortar (1:6) for laying floor finishes complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 10mm thick cement mortar (1:4) receive tiles in vertical surface complete all as specified and as directed by Engr-in-charge.

S&F Aluminium anodised tower bolt 150 mm long of extruded section etc complete all as specified and as directed by Engr-in-charge.

S&F 100 mm stainless steel butt hinges, medium weight, cold rolled, complete all as specified and as directed by Engr-in-charge.

S&F Aluminium handles, 150 mm size, cast type anodized complete all as specified and directed by Engr-in-charge.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F Factory Made rigidlam PVC door frame size 100mm x 50mm with wall thickness of 5mm, made out of extruded 5mm PVC sheet of density 600Kgs/cbm manufactured by and ISO-9000 certified company and by joining 3 Nos heat bend PVC sheet sections. The inside section of size 90x30mm shall be made from colour PVC sheet of 5mm thickness. The inside section will be covered by sticking two sections of size 35x35mm and 65x45mm made from 5mm thick plain PVC sheet. The frame shall be mitre cut at two corners and jointed with 4 Nos of 150 brackets of 15x15mm MS square tube. The two vertical door frames are to be reinforced with 40x20mm MS tube of 19 gauge duly filled with 18mm thick PVC throughout the frame. The door frame shall be fixed to wall using 100 mm nickel coated dry wheel screw through the frame by using PVC fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc complete as per manufacturers specifications and direction of Engineer-in-Charge.

M&L for applying three coat of white washing on wall surface including prepration of old plastered surface/RCC jafferies of walls all as specified and directed by Engr-in-charge.

S/F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed by Engr-in-charge.

S & F in repair of Vitreous china squatting plate urinal,white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed by Engr-in-charge.

S&F in repair of PVC valveless, syphonic action type, low level flushing cistern 10 Ltrs capacity with inlet, ball valve, float and handle including brackets (excluding flush/discharge pipe) complete all as specified and directed by Engr-in-charge.

S&F in repair of Vitreous china WHB 550x400mm size white flat back with brackets incl cutting or pinning ends of brackets (excluding waste pipe) complete all as specified and directed by Engr-in-charge. (Make: Hindware or Parry)

S&F in repairs of PVC connections 15mm size with PTMT nuts of length 450mm to flushing cistern and WHB complete all as specified and directed by Engr -in-charge.

S&F in repair of 15 mm bore pillar taps fancy type (swan neck) cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwd for iron pipes complete all as specified and as directed by Engr-in-charge.

S&F in repair of 15 mm bore angle stop valves cast copper alloy screwed down high pressured with batterfly handle screwed both ends for iron pipes fancy type choromium plate (concealed type) complete all as specified and as directed by Engr-in-charge..

S&F in repair of 15 mm bore stop valves cast copper alloy screwed down high pressured with batterfly handle screwed both ends for iron pipes fancy type choromium plate (concealed type) complete all as specified and as directed by Engr-in-charge..

S&F in repairs for bib tap 15 mm bore fancy type chromioum plated with long shank & cup complete all as specified and as directed by Engr-in-charge.

S&F 600 x 450 mm bevelled edge mirror of seleceted quality glass mounted on 6mm thick AC building board or PVC sheet and fixed to wooden plug with CP brass screw and cup washer complete all as specified and as directed by Engr-in-charge.

S&F tubular towel rail 600mm long PTMT between flanges complete all as specified and as directed by Engr -in-charge.

Double action floor spring hydraulically regulated madeup of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Taking up or down GI tubing 15mm bore and connections, including cleaning for refixing or removal to storeyard complete all as specified and as directed

Taking down 20mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors in concealed type complete all as specified and directed by Eng-In-Charge.

S/F 15mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors in concealed type complete all as specified and directed by Eng-In-Charge.

All as per item No- above but 20mm bore complete all as specified and as directed by Engr-in-charge.

S & F in repair PVC (SWR) bends any radius (110 mm bore) complete all as specified and as directed by Engr-in-charge.

S & F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) complete all as specified and as directed by Engr-in-charge.

S&F in repair 75 mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls or floors complete all as specified and as directed by Engr-in-charge..

S&F in repair grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap all as specified and directed by Engr -in-charge..

S&F in repair of 50mm PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement etc complete as specified and directed by Engr -in-charge..

Dismantling wall and ceilling boards(fibre, pilp, insulation etc) or insulation boards/slab/blankets, any thickness including cover filletes etc complete all as specified and as directed by Engr-in-charge.

S & F Anodised aluminium snap grid 605 x 605mm frame work for false ceiling with 12mm thick GI wire work all as specified and directed by Engr -in-charge.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr -in-charge.

S & F 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed

S & F in repair for Boarding hardwood 2nd class 15mm thickness, plane one side with butt joints supplied & fixed with nails in any situation (except flooring and skirting) complete all as specified and as directed by Engr-in-charge..

Providing precast cement concrete type B0 1:2:4 (12.5mm graded aggregate) louvres and jallies, 25mm thick set in CM 1:4 (measured solid), including all mouldings etc all as specified and directed by Engr -in-charge.

M & L for providing plain cement concrete 1:3:6 type C-1 (using 20mm stone aggt) as in kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and as directed by Engr-in-Charge.

Note : Prior to commencement of the subject works, the contractor needs to submit valid Electrical License in the name of himself/them self or Agreement with agency having valid Electrical License alongwith Agency's Electrical License to the Accepting Officer for his approval through GE. In absence of such documents, no work will be executed at site and to be treated as defaulter on the Contractor's part . In addition, Supervisor for execution of electrical works employed by the Contractor shall posses Supervisory Certificate of competency issued by concerned State Govt/Union Territory and the Worker/Tradesman for execution of Electrical Works must hold necessary permit issued by concerned State Govt/Union Territory.

M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and Drawn through and including PVC conduit 20mm dia including all accessories concealed in walls/roofs/ ceiling one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed.

All as per Item No 1 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed.

All as per Item No 1 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 2.5 Sqmm copper cable FRLS & 2.5 Sqmm FRLS copper cable for earth continuity wire complete all as specified and as directed.

S&F for switch socket combination 5 Pin 6 Amp universal complete all as specified and as directed.

S&F for switch socket combination 5 Pin, 6/15 Amp universal complete all as specified and as directed.

S&F for switch piano flush type 6 Amp single pole one way complete all as specified and as directed.

Supply and fix ceiling fan regulator electronic Step type, solid state, 120W, 2 module, 240 volts, complete all as specified and as directed.

S&F 36 W (600x600mm) , LED Recessed full lit luminarie with glare free uniform illumination with longer life and less maintenance , Environmental friendly, new generation, aesthetically designed, ultra modern with high brightness SMD LED lamp as light source , suitable for Armstrong /Grid ceiling etc pre-wired complete with fixture all as specified and directed after taking down & directed by Engr-in-charge.

S&F in repair for wall mounted LED fittings 20 watt, trimline model , 5700 k-6500k lume efficiency >100/watt pf >0.90 , extruded polycarbon heat sink provided for energy efficient heat dissipation & integrated electronic with all accessories and with lamp ,internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-charge.

S&F exhaust fan, steel body AC single Phase. 230V, 50 Hz RPM 1200 copper winding of of size 300 mm sweep with, blades, and frame and louvers all complete all specified Note: Making of hole in wall and making good should be included in quoted rates.

M&L Submain wiring with PVC insulated FRLS copper conductor cable unsheathed for circuit along with earth wire including PVC rigid conduit of suitable size with accessories fixed to wall complete and making good the disturbed area for 3 runs 2.5 Sqmm (01 No phase conductor, 01 no netral conductor, 01 earth continuity wire complete.( Note:- 3 runs of 2.5 Sqmm and one run of casing caping shall be measured and paid as one length.

S&F MCB DB double door,IP 43 protection triple pole and neutral 12 way sheet steel phospetised powder painted complete

S&F MCB DB double door,IP 43 protection single pole and neutral 8 way sheet steel phospetised powder painted complete

S&F MCB TPN 63 Amps, 240V, 50Hz, 10KA of capacity all as specified.

S&F MCB TPN 32 Amps, 240V, 50Hz, 10KA of capacity all as specified.

S&F MCB SPN upto 40 Amps, 240V, 50Hz, 10KA of capacity all as specified.

S&F MCB SP 6 to 32 Amps, 240V, 50Hz, 10KA of capacity all as specified

M& L for cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed

M & L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip of size 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Supply,lay,connect and commission LT underground cable XLPE of size 35 sqmm 3.5 core insulated screened PVC bedded galvanised steel strip armoured heavy duty with multi stranded aluminium conductor 1100 volts grade (ISI) marked laid in trenches, ducts, pipes or fixed on pole etc.

Supply,lay,connect and commission LT underground cable XLPE of size 95 sqmm 3.5 core insulated screened PVC bedded galvanised steel strip armoured heavy duty with multi stranded aluminium conductor 1100 volts grade (ISI) marked laid in trenches, ducts, pipes or fixed on pole etc.

Supply and lay tube GI light grade of 40 mm bore in trenches/ road crossings/ floor etc. with all fittings for protection of cable complete all as specified & directed.

Excavtion in trenches n.exc 1.5 meter wide and n. exc 1.5 meter in depth for foundation etc or for laying of cable etc and getting out in soft/loose soil.

All as per item No 1 above but hard surfaces such as in road cutting/ hard standing etc including making good disturbed surfaces to match with original complete all as directed.

Supply and laying new dry river sand laid in trenches 8 cm below the cable and 15cm above the cable and punned to 18 cm as cable cushioning and covering all as directed.

Supply and laying in replacement of brick well burnt locally available sub class 'B' laid over sand cushioning for cable protection in trenches width of brick perpendicullar to the length of cable including taking up of old UNSV bricks complete all as specified and directed by Engr-in-Charge.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25 cm depth.

Removing of excavated material (soil) to a distance n.exc 50 meter and depositing where directed at a level n.exc 1.5 meter above the starting point.

M&L for shifting of electric meter single phase to the location as directed by Engr-in-Charge and refixing the meter at new location including required electric connections all complete as directed by the Engr-in-Charge.

M/S SINGH ENTERPRISE

DANATION CONSTRUCTIONS

M/S Subhadip Enterprise

M/S ASHA ENTERPRISE

M/S KUMAR AVINASH

LALAN SHARMA

M/S MBS TRADING CO

M/S AMARNATH AGARWALLA