Converting overhead electrical lines to UG cable from jungli peth TC to to vittal mandir main road of ward no.72 hdmc hubli

Converting overhead electrical lines to UG cable from jungli peth TC to to vittal mandir main road of ward no.72 hdmc hubli

Fabricating supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft IS 2062 for base plate with door opening arrangements...

Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts nuts etc. complete. 4.6.1) Single Arm Bracket with 1000 m...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130 1984 and Virgin PVC insulation sheathed suitable for work...

1.1Kv XLPE or Heat resistant PVC insulated PVC Extruded Inner sheath Armoured LT UG cable as per IS 1554 part 1 or IS 7098 Part 1 Armouring strip thickness and resistivity as per IS 3975 16...

32.04) 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Par...

32.18) 240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sh...

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits depositing on bank upto a lead of 50 Mtr Supplying and Displaying necessary Danger Boards an...

PLB Pipe 40/33 mm ESCOMs SR 2023-24 Page No 366 Item No 66.05

66.04 HDPE/PLB Pipe 50/42 mm Basic Rate: 85014

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve indicator ON orOFF energy cross 3 with Short circuit breaking...

Earth work excavation for pipelines/cables by Manual means upto 600 mm

trench width, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution lights...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labo...

70) 7.05)Releasing & Refixing of Over Head Service Mains (Single Phase/Three Phase) for consumer installation and street lighting and similar work (While executing

reconductoring work

202) 23.07) Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.,

129) 16.05) Any Dismantling work(90% of the Pole erection charges) Releasing of RCC/PSCC Poles 9/8Mtr , pole erection charge= 991rs. 29)2.02)

Releasing of Conductor 7.04) Rabbit ACSR

Releasing of Conductor Weasal

129) 16.05) Any Dismantling work(90% of the Pole erection charges) 5.01) Releasing of 2 Pin cross arm with Insulator and Braces fixing,

5.01) fixing charge =143

129) 16.05) Any Dismantling work(90% of the Pole erection charges) 5.02) Releasing of 4 Pin cross arm with Insulator and Braces fixing,

5.02) fixing charge =143

COST DATA SHEET - 19, 5) Cable covering tiles 250x125x40 mm

274 )27.01) Covering cable with Tiles labour charges

470) 51.04) Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit

of 300 mm width and 3300 mm depth and

using 50x6 mm flat welded to ground rod as

terminal & connected to...

471) 51.05) Bentonite clay slurry for earthing in 50 Kg

237) 30.02) 12 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with

Copper Busbar as per IS-13947 Part-1&2

(Dwg No. BESCOM/GM/QS&S/41 Dtd

LT Feeder piller box (MS & Thermoset Plastic

Enclosure) including termination, wiring &

connection of cables

81) 9.04) above 8 Ways (MS Enclosure)

34) Straight Through Jointing Kit Suitable for

1.1 kV Class LTUG Cable as per IS-13573

Heat Shrinkable Type

22.15 120 to 240 Sqmm Heat shrinkable Type Terminations

60) Aluminium End Terminal (Lug)

60) Aluminium End Terminal (Lug)

60.02) 16 Sqmm Lug

63) Brass Cable Gland

21.05) 2.5 to 25 Sqmm Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required

21.07) 120 to 240 Sqmm Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. ...

48) 1.1 kV Class HR (Heat Resistant) PVC

Insulated & Sheathed Aluminium Single

Core Lead wires as per IS-694: 2010 with

following parameters & as per BESCOM

H2/H4 grade Aluminium Conduc...

a) Guy set with No. 15 Strain Insulator &

Concreting materials as per Dwg No. BESCOM/

GM/CP/7 Dt: 24.10.07 material

Guy set with No. 15 Strain Insulator &

Concreting materials as per Dwg No. BESCOM/

GM/CP/7 Dt: 24.10.07 Labour Charges

7) ACSR Conductor as per IS-398 (Part -

2/1996) with following parameters:

H2/H4 grade Aluminium conductor

having purity of 99.7%

Conductor Resistivity of 0.028264

59) 7.02) Rabbit ACSR

49.6) PG Clamps for Coyote Conductor

Extracted from KPTCL SR Item No.