Construction of Multi-Purpose Hall at Ashoka Street in DN-33, Unit-08, Zone-3 (Under MC Fund 2025-26)

Dismantling the existing Brick or Stone in clay walls under 3M high including carefully clearing the debris etc. complete.

Earth work excavation for foundation in all kinds of soils invarying depths including dismantling any masonry or roots met with in foundation shoriEarth work excavation for foundation in all kinds of soils invarying depths including dismantling any masonry or roots met with in foundation shoring with planks and bailing water if necessary, clearing levelling the site with initial lead and including refilling the sides with excavated earth etc. complete

Carting away the surplus earth and debris to a lead of 1km and dumping in the Corporation land as directed during the execution.

Providing Quarry Rubbish From Approved Quarry Including Cost And Conveyance of All Materials To Work Site All Labour For Spreading. Watering Compacting Etc. Complete.

Plain Cement concrete work 1:4:8 (1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 8 blue granite broken stone jelly 40mm gauge) including consolidation curing, etc. complete for foundation, etc. upto basement

Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement for RCC column footings pintol blocks plinth beam staircase steps critical steps critical piers etc. using mild steel sheets of size 90x60cm and 10 gauge stiffened with welded mild steel angles of size25x25x3mm for boarding laid over silver Oak (country wood) joistsof size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cmcentre to centre etc. complete..

Providing And Laying In Position, Standarded Concrete Mix M-20 Grade In Accordance With Is:456-2954 Using 20mm Ond Down Graded Hard Broken Granito Stone Jelly For All Rcc Items of Works With Minimum Cement Content of 325 Kg/M3 And Maximum Water Cement Ratio of 0.55, Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is:9103 to accelerate, Retard Setting of Concrete, Improve Workabilly Without Impairing Strength And Durability With About (5 Cu.In.) 7730 Kg. of 20mm Machine Crushedstone Jelly And With About (3.3 Cum.) 5150 Kg. of 10-12mm Machine Crushed Stone Jelly And With About (4.79 Cu.m.) 7670 Kg. of Crushed Stone Sand (M Sand), But Excluding Cost of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing and including pumping charges Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor/ Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental, Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements of Is Standards. (No Separate Payment Will Bemade By The Department For The Excess Usage of Materials)

Supplying, fabricating and placing in position Ribbed tor steel (RTS) for all RCC works as per design given including cost of steel and GI binding wire (18 G) in all floors etc., complete complying with standard specification (contractor has to make his own arrangements for the supply of steel and binding wire)

Brick work using best quality II class Ground moulded chamber burnt bricks of size 9" X 4-3/8" X 2-3/4" in cement mortor 1:5 for foundation and basement including curing etc complete complying with standard specification.

Plastering with cement mortar 1:3 (1cement and 3 Crushed Stone Sand (Commercially called P-Sand)) 10mmthick including hacking, curing,etc., complete for ceiling andother exposed RCC surfaces.

White washing two coats over new plastered surface..

Colour washing two coats over new plastered surface..

Providing and laying first quality of double charged vetrified tiles of all colours of size 600mmx600mmx8mm set in cm 1:3, 12mm thick including pointing with white cement, labour materials, etc(Relevent ISI STD)

Paving the flooring with special type of flooring (tiles coloured cement based hydraulic pressed Antiskid tiles) 20mm thick in cm 1:3 including pointing with colour cement etc. complete.(ISI).

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Supplying and fixing M.S.Grill gate of required size in twoshutters with necessary iron members gun metal cups and wheels75mm dia. with fittings locking arrangements etc. complete including painting a priming coat of approvedprimer etc. complete (The design of gate furnished is subject toalteration during execution.).

STEEL DOOR Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxide primer.

Painting new iron work two coats with ready mixed paint with relevent ISI STD of superior quality and approved colour..

Plastering with cement mortar 1:5 ( 1 cement and 5 P sand)12mm thick including curing, etc., complete.

Provision for Name Board etc., complete.

Provision for Naming stone etc., complete.