SPL REPAIR TO BR YARD AND PROVN OF SECURITY FENING IN ASC BN,PROVN OF IRON JALI WITH 3 IRON GATES IN BLDG NO 24,PROVN OF SHED NEAR BLDG NO-N44,PROVN OF ROOM WITH TOILET IN DIV HQ,PROVN OF TOILET BLOCK NEAR SKIN OPD UNDER GE AMRITSAR CANTT

Amount

AC/SRW(BLDG)-06/2023-24 Dismantling of roof brick tiles fixed in cement mortar in single layer ; Complete all as specified and directed by Engineer-in-Charge.

Demolition mud phuska in roofs any thickness including plastering and leeping ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour Cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof padding (avg 40mm thick), roof kerbs or mud stops, rounded or chamfered on edge ; Complete all as specified and directed by Engineer-in-Charge.

Material and labour for APP based polymeric membrane minimum weighing 3kg/Square Metre and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/Square Metre) laid on primed surface by forced application over a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 40 mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of crude oil by weight of cement ; Complete all as specified and directed by Engineer-in-Charge.

All as per item here-in-before but except tiles (old serviceable tiles obtained from dismantling) shall be reused after necessary cleaning of mortar)

Taking down cement plaster on brick, concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Of any description ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and fair without using extra cement ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 10mm thick cement plastering in CM 1:3 on ceiling surfaces other than fair surface, finished the surfaces even and fair without using extra cement ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement) ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of new plaster surface and applying two coats of Oil bound distemper over a coat of primer over wall care putty on walls ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of new plaster surface and applying two coat of white wash on wall ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of new plaster surface and applying two coat of white wash on ceiling ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Complete removal and preparation of existing treatmnet of plastered surfaces on walls applying two coats of Oil bound distemper over a coat of primer ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for one coat of white wash on old treated plastered surface on walls of undecorated surfaces ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for one coat of white wash on old treated plastered surface on ceiling of undecorated surfaces ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for complete removal of existing treament including preparation of surfaces and applying two coats of cement base paint on walls ; Complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats with shutter n.exc 1.50 Square Metre each (without taking off shutter for the chowkats ) ; Complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats with shutter exc 1.50Square Metre but n.exc 4 Square Metre (including CB shutters with chowkhat); Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing pressed steel frames 1.25mm thick for door size of frame 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 ; Complete all as specified and directed by Engineer-in-Charge.(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- Sheet glass, wire mesh and painting shall be measured and paid sperately.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 ; Complete all as specified and directed by Engineer-in-Charge. NOTE:-Sheet glass and painting shall be measured and paid Separately.

Supply and Fixing second class hardwood (rail & style) 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing mild steel work Fe 410-W(Gde-E- 250) quality-A Fe in framed work as in door frame, shutter or gates of angle iron or other section with gusset plates,rails,braces etc complete drilled for fixing of steel sheeting or orther covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing aluminium anodised barel tower bolt of extrud sec 150mm long ISI marked ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing extruded aluminium alloy handle fabricated type anodized of size 150 mm long ISI marked ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 300mm long aluminium alloy,anodised ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded sectionsor cast aluminium alloy ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 300mm, mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete. Note : repairs required on steel door frame, welding to be carried out or necessary alternative arrangements to be done ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing figured glass pin head type, 3mm thick ordinary quality, in any shape, not exceeding 0.50 Square Metre in each pane including and glazing with oil putty ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing rotational moulded polytheylene triple layered white water storage tanks of capacity 500 Litres (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and 20mm dia brass float valve with brass rod ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc ; Complete all as specified and directed by Engineer-in-Charge.

Taking up and down GI pipe15mm bore including fittings, connection, including cleaning for refixing in any position ; Complete all as specified and directed by Engineer-in-Charge.

Taking up and down GI pipe 20mm bore including fittings, connection, including cleaning for refixing in any position ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings incl taking down ISI marked ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings incl taking down ISI marked ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs stop valves(Concealed cock) 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs stop valve/angel valves 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs CP shower rose 125 mm size with swivel joint fancy type including fixing to steel pipe or union ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc including lime concrete in lime mortor 1:3 usisng broken bricks 40mm graded coarse aggregate ; Complete all as specified and directed by Engineer-in-Charge. Note:- Flush pipe and flushing cistern to be measured and paid separately.

Supply and Fixing of Vitreous china wash down water closet pan( pedestal pattern), white complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately ; Complete all as specified and directed by Engineer-in-Charge.

Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs PVC low level flushing cistern 10ltr capacity, with syphonic action PVC float valve, brackets and 32mm bore PVC flush pipe etc ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs Vitreous china wash basin(with pedastal),white flat back,size 550x400mm excluding taps but including brackets,32 mm waste pipe and 32mm brass(CP) waste coupling ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs Pillar taps 15mm bore, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long embedded in the wall ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing towel ring 300mm dia of brass (chromium plated) fixed with and including Chromium plated brass screws and wooden/plastic cleats ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing brass chromium plated towel rail `D’ type 60 cm long fixed to wall ; Complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing PVC (SWR ) bends with access door 75 mm bore any radius ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing PVC (SWR ) bends with access door 110 mm bore any radius ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing PVC (SWR ) vent cowl 110 mm bore ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour PVC (SWR ) floor trap 75 mm plain with grating incl. jointing with solvent cement as per site requirement ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Stack clamps (110 mm pipe) out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Stack clamps (75 mm pipe) out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of new painted wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed by EIC.

Demolation of brick work built in cement mortar or cement lime mortar as cutting, opening of exsiting wall ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

All as per item No here in above but except bricks (old dismantled serviceable bricks obtained from dismantling shall be reused after necessary cleaning of mortar) ; Complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 50mm thick cement cocnrete type C-1 (1:3:6) (20mm graded aggregate) as in plinth protection finishing the surface even and fair complete all as specified and directed by EIC.

Roughning the surface of old concrete floor picking sweeping clean and washing down with water to remove dust/mud etc.and brushing neat cement slurry @ 3kg/Square Metrecomplete complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Non skid coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) size 400mmx400mm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as spcified and directed by EIC.

All as per Ser item No here-in-before but as in skirting over 10mm thick cement plaster in 1:4.

Material and Labour for glazed ceramic coloured tiles in vertical surface of size 450x300x6-7mm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles complete all as speciifed and directed by EIC.

Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 Square Metre each) over cement screed base of 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ; Complete all as specified and directed by Engineer-in-Charge.

All as per srl Item No here-in-before but as skirting/dado over rendering 15mm thick in CM 1:4.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection Finishing fair and even ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 25mm thick sand cushioning ; Complete all as specified and directed by Engineer-in-Charge.

Dismantling structural steel work including doors, gates including truss etc ; Complete all as specified and directed by Engineer-in-Charge.

Dismantling Plain or corrugated sheet Sheetingany Gauge thickness including naintal or similar pattern roof covering etc ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Steel work in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 0.5 mm Plain galvatume Mild steel sheeting ,in ridge , vallly gutters drips and staight lenght and grith as fixed with grading of zink coating 275 ; Complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for foundation, manholes,sewage line etc exc 10 Square Metre on plan and getting out in soft/loose soil ; Complete all as specified and directed by Engineer-in-Charge.

Returning,filling in,spreading,levelling,watering and well ramming in layers not exc 25cm thick each in soft/loose soil,; Complete all as specified and directed by Engineer-in-Charge.

Removing excavated material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point ; Complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up existing unserviceable 150 mm SGSW pipe and haunching against the sides of pipe at any depth including removing rubbish to a distance exceeding 100m ; Complete all as specified and directed by Engineer-in-Charge.

Supplying,laying in trenches, jointing and testing 150 mm bore salt glazed stoneware pipe grade 'A' drainpipe ISI marked ; Complete all as specified and directed by Engineer-in-Charge.( Excavation and earthwork shall be measured and paid for separately under appropriate items of Sch. 'A'.)

Material and labour for PCC 1:4:8 type D-2(using 40mm graded crushed stone aggregates)for bed of sewage lines of 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested ; Complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (Reinforcment) of any description ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for RCC in 1:2:4 type B-1(using 20 mm graded stone agg) as in chajjas facia, shelves, lintel etc and similar work ; Complete all as specified and directed by Engineer-in-Charge.

Formwork to rough finished surface of concrete flat to soffits of shelve, chajja, fins etc including supports over hangs upto 12m height ; Complete all as specified and directed by Engineer-in-Charge.

Formwork (rough finished) to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 10 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 10mm dia over TMT bar cut to length bent to shaps including cranking binding spirraly, hooping, hooking end and binding with MS wire (anealed) not less then 0.9 mm dia or securingwith clips ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour TMT bars 6 to 8mm dia and over cut to length bent to shape required including crancking spirally for hooking ends and binding with and including MS wire annealed n.less than 0.9mm dia ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of old steel surfaces and applying two coats of synthetic enamel paint over zinc chromate primer including preparation of steel surfaces ; Complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old painted wooden surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint ; Complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads in wooden/steel window ; Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 Square Metre in each pane including and glazing with oil putty ; Complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairss and white / colour wash etc.; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FR) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly ; Complete all as specified and directed by Engineer-in-charge. One light/one fan/one bell point controlled by one, one way switch.

Supply and Fixing point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FR) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly ; Complete all as specified and directed by Engineer-in-charge. One light point controlled by two Nos of two way switch.

Supply and Fixing point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FR) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly ; Complete all as specified and directed by Engineer-in-charge. One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

Supply and Fixing point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FR) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly ; Complete all as specified and directed by Engineer-in-charge. One socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board.

All as per item here in before but wiring with using cable 2.50 sqmm size copper wire (FR) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size copper wire for one 6 pin socket outlet, 16 Amperes on independent board.

Supply and Fixing of switch piano flush button single pole one-way 5 Ampere ; Complete all as specified and directed by Engineer-in-charge

Supply and fixing of switch piano flush button single pole two-ways 5 Ampere ; Complete all as specified and directed by Engineer-in-charge

Supply and fixing of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), flush type 250 volts AC ; Complete all as specified and directed by Engineer-in-charge

Supply and fixing of switch piano flush button single pole one-way 15 Ampere ; Complete all as specified and directed by Engineer-in-charge

Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC ; Complete all as specified and directed by Engineer-in-charge

Supply and Fixing Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size ; Complete all as specified and directed by Engineer-in-charge

Supply and Fixing lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings ; Complete all as specified and directed by Engineer-in-charge

Supply and Fixing metal enclosure (plug & socket type DB) complete including single pole and neutral enclosure with two pin, earth plug and socket complete with one SP MCB C Curve type of capacity 20 Amp, 10 KA ; Complete all as specified and directed by Engineer-in-charge

Supply and Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type ; Complete all as specified and directed by Engineer-in-charge

Supply and Fixing MCB double pole, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘C’ curve type ; Complete all as specified and directed by Engineer-in-charge

Supply and Fixing MCB double pole higher rating, 240 volts, 100 Ampere, rupturing capacity 10 KA, ‘C’ curve type ; Complete all as specified and directed by Engineer-in-charge

Material and Labour for sub main wiring with 1100 volt grade two single core FR Wire PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour including taking down old unserviceable sub main wiring ; Complete all as specified and directed by Engineer-in-charge NOTE: 3 single core 6 sqmm and PVC conduit shall be measured as one RM.

Supply and Fixing wall /ceiling mounting LED 18 Watt pride plus/smart line tube light fitting complete with all acessories 1x18 Watt LED , with CCT of 6000k suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection ; Complete all as specified and directed by Engineer-in-charge

Supply and Fixing fan regulator electronic step type & socket size and making all necessary connections ; Complete all as specified and directed by Engineer-in-charge

Material and labour service connection PVC cable 10 Sqmm 2 Core incl GI wire and PVC conduit for fixing in wall /pole incl connection ; Complete all as specified and directed by Engineer-in-charge

Supply and Fixing LED Blub 9 Watt pin type 220 Volts including connection ; Complete all as specified and directed by Engineer-in-charge

Supply and Fixing Casing /Caping 25 mm dia including connection ; Complete all as specified and directed by Engineer-in-charge

Supply and Fixing Casing /Caping 20 mm dia including connection ; Complete all as specified and directed by Engineer-in-charge

ASR/M/15/2023-24 Material and labour for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watering ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Framed work as in gate of angle or other section etc. complete using or induction butt welded tubes conforming grade fe. 290 ; Complete all as specified and directed by Engineer-in-Charge.

Material and labour Steel Screw hole for nails or screwshand punched through iron or mid steel rivert hole etc ; Complete all as specified and directed by Engineer-in-Charge.

Material and labour 2mm thick fibre glass reinforced translucent plan sheet with two side fixed with and washer in roof wall, fixed with assmble etc ; Complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of untreated steel/iron surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coats of sythetic enamel paint over and incl one coat of red oxide primer ; Complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC (1:3:6) type C2 using 40mm graded aggregate for foundation filling and mass concrete etc ; Complete all as specified and directed by Engineer-in-Charge.

ASR/M/08/2023-24 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil ; Complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm ; Complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n.exc 50 m and depositing where directed ; Complete all as specified and directed by Engineer-in-Charge.

Cement concrete type D2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement) ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour fpr Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement) ; Complete all as specified and directed by Engineer-in-Charge.

Material and labour preparation of newly plastered surface of wall and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour 75mm thick Cement concrete type D2, 1:4:8 using 40mm graded agregate as in sub base of floor ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Square Metre but not exceeding 0.18 Square Metre in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore complete. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately ; Complete all as specified and directed by Engineer-in-Charge.

Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in Repair vitreous China wash basin white,flat back size550x400mm including CP waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar Tap 15mm bore of fancy type ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing PVC connection 15mm size with PTMT nuts of length 600mm ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs 100mm dia CP grating with or without hole type ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in rfepairs CP brass towel rail of 20mm dia and 600mm long ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 20mm bore tubes (mediu; Complete all as specified and directed by Engineer-in-Charge. all as specified and directed.

Supply and Fixing in repair PVC (SWR) pipe 75mm dia fixed in wall/floor ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing PVC (SWR) pipes single110mm socketed, in any length with rubber ring joints, laid in trenches or in floors ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair 75mm PVC (SWR) bends any radius ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair 75mm PVC floor trap ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Solid PVC Door Frame of Size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube in opening as per specification and drawing ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 28 to 30 mm thick (Rajshri brand) factory made solid PVC moulded Door shutter with 2,3 or6 raised psnel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC Sheet on back face, fixing in frame at site as per specification and drawing ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing factory made 30 mm thick flush shutters solid core construction with block board core and plywood face panels ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 150mm long Aluminium handles, cast type anodised ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel ; Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Providing precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chulla hoods, chajjas, ater troughs, mangers, shelves and similar articles with plain faces complete all as specified ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Cutting into existing manholes for connecting 150 dia new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour apply two coats of synthetic enamel paint over a coat of primer including preparation of new steel surfaces ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre ; Complete all as specified and directed by Engineer-in-Charge.

Material and labour preparation of newly surface of Ceiling and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work ; Complete all as specified and directed by Engineer-in-Charge.

ASR/M/09/2023-24 Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour Welded steel wire fabric supplied and fixed complete to wood or steel members including necessary welding ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour apply two coats of synthetic enamel paint over a coat of primer including preparation of new steel surfaces ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required superficial area n exc 150 Sq.cm ; Complete all as specified and directed by Engineer-in-Charge.

AC/REV-04/2023-24 Excavating in post holes (or similar holes) each hole not exceeding 0.5 Cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and remvoing surplus soil to a distance not exceeding 50m and making good surfaces in soft/loose soil complete all as specified & directed by the Engineer-in-Charge.

Material and Labour for Cement concrete type B2, 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour apply two coats of synthetic enamel paint over a coat of primer including preparation of new steel surfaces ; Complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ; Complete all as specified and directed by Engineer-in-Charge.

Material and Labour Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth ; Complete all as specified and directed by Engineer-in-Charge.

ASR/M/18/2023-24 Surface excavation n exc ( not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft loose soil ; Complete all as specified and directed by Engineer - in - Charge.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc,or for shaft, wall, cesspits, manholes pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour cement concrete in foundations, filling and mass concrete type D2 (1:4:8 )using 40mm graded stone aggregate ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour Brick work with subclass ' B' brick, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour Brick work with subclass 'B' Brick, straight or curved on plan to any radius in half brick thick wall built in 1 : 4 Cement mortar ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour PCC 1:2:4 type B0(using 12.5mm graded stone aggregate ) for Damp proof course to horizontal or vertical surfaces including necessary formwork 40mm thick ; Complete all as specified and directed by Engineer - in - Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)to rough finished surface of concrete flat ; Complete all as specified and directed by Engineer - in - Charge.

All as per item No here in before but to sides and soffits of beams, lintels etc ; Complete all as specified and directed by Engineer - in - Charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour for RCC 1:2:4 (Nominal Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like ; Complete all as specified and directed by Engineer - in - Charge.

All as per item No here in before but as in beams, cantilevers, bressummers, lintels over 1.5m span ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 internally and finished even and smooth ( without using extra cement ) ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour rendering 15mm thick on external surface in two layers of brick work or concrete surface in cement mortar 1.4, First layer shall be 10mm and second layer shall be 5mm thick mixed with WPC as per manufacture instructions complete(WPC shall be measured and paid separetly ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour rendering 10mm thick on ceiling on fair faces of concrete surface in cement mortar 1:3 and finished even and smooth ( without using extra cement ) ; Complete all as specified and directed by Engineer - in - Charge.

Returning filling in including spreading, leveling, watering and well ramming in layers n.exc 25cm thick complete all as specified ; Complete all as specified and directed by Engineer - in - Charge.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips ; Complete all as specified and directed by Engineer - in - Charge.

All as per item No here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube , all as per specification and drawings ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing factory made solid panel PVC door shutter 30mm thick ( style) consisting of frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the ms frame welded/ sealed & rail with suitable PVC sheet beading, and joined together with solvent cement all as per specification & drawing ; Complete all as specified and directed by Engineer - in - Charge.

Supply and fixed steel window or ventilators, fixed type with glazing bars ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 200mm Aluminium anodised barrel tower bolts of extruded section and fixed ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 100mm size butt hinges medium weight, cold rolled mild steel, and fixed ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 150 mm size extruded aluminium alloy handles, fabricated type, anodised ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour 75mm thick cement concrete type D-2 1:4:8 ( 40mm graded aggregate as in sub base of flooring ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour 25mm thick cement concrete type B-0,1:2:4 , 12.5mm graded aggregate as in flooring ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour screed bed or bedding layer or mortar 15mm thick for laying of floor finishes in cement mortar 1 : 6 ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing Non-skid ceramic coloured tiles 400x400x7mm thick in floor etc set and jointing in neat cement slurry and pointing in white or coloured cement to match ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing glazed ceramic coloured tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour for two coats of cement base paint over coat of primering coat including preparing surfaces of new plastered surfaces ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour for three coats of white wash on ceiling including preparing new plastered surfaces ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Preparation of new or previously untreated steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat red oxide ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, shite, with inlet, ball valve, float and handle including brackets ; Complete all as specified and directed by Engineer - in - Charge.

Supply and fixing vitreous china pestel EWC with s and p trap including connection to drain ( or outgoing pipe ) and to flush pipe excluding seat cover ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing plastic water closet seat cover black or white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hings device ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing vitreous china white wash hand basin white flat back size 550 x400 including low density polythene (LDPE) pipe of pressure rating 6 kg/sqcm, 32mm bore for waste pipe of wash basin etc ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing vitreous china bowl urinal flat back half stall type white colour size465x355x265mm (min) white with gratiingxin and union for discharge pipe incl providing and fixing plug bedding urinal against wall in CM 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing Vitrous china urinal partition white of size 310x770mm of approved make and fixed to wall terminating about 40cm above floor line ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing PVC connections 15 mm size with PTMT nuts of length 450mm ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing flushing jet including pipe for Europian type closet including fixing to 15m dia pipe suitable length with brass check nut ; Complete all as specified and directed by Engineer - in - Charge.

Supply & Fixing for steel water tubing, galvanised, medium grade, with all fittings and fixed complete to walls & ceiling or laid in floors or concealed in walls etc of size of tubing 15 mm bore ; Complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No here in before but size of tubing 20 mm bore ; Complete all as specified and directed by Engineer - in - Charge.

Supply & Fixing Bib taps, cast copper alloy fancy type, chromium plated, with long shank long body for sink with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15mm bore ; Complete all as specified and directed by Engineer - in - Charge.

Supply & fixing stop valves, cast copper alloy fancy type , chromium plated, screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe of size 15mm bore ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipeof size 15mm dia bore of pipe and fixed ; Complete all as specified and directed by Engineer - in - Charge.

Supply & fix 20 mm bore ball brass valves, high pressure with polythene float & fly nut complete screwed for iron pipe of the following bore sizes ; Complete all as specified and directed by Engineer - in - Charge.

Supply & fixing 1000 Ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position ; Complete all as specified and directed by Engineer - in - Charge.

Supply & Fixing Gun metal bronze globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, bore 20 mm dia of pipe ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing in low density polythene (LDPE) pipe of pressure rating 6 kg/sqcm, 32mm bore for waste pipe of wash basin etc ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 100 mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 150x150mm size Salt-glazed stoneware gully traps, square or round mouthed, type `P' ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing Stack clamps for 100mm dia pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour Hardcore of brocken bricks guage n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled/rammed to a true surface as in plinth protection ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour cement concrete type C-2 1 : 3 : 6 40mm graded aggregate as in plinth protection 75mm thick ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing Soap dish, vitreous China white, approximate size 160x160x90mm ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing Towel rail 600mm long of Brass chromium plated D Type fixed with and including Chromium plated brass screws and wooden/plastic cleats ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) including PVC brackets ; Complete all as specified and directed by Engineer - in - Charge.

All as per item No here in before but fixed to wall ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 110mm bore PVC (SWR ) bends and radius ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 110mm bore PVC ( SWR ) 'P' trap ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing PVC connections 15mm size with PTMT nuts of length 450mm ; Complete all as specified and directed by Engineer - in - Charge.

Supply and Fixing 100mm bore PVC ( SWR ) vent cowl ; Complete all as specified and directed by Engineer - in - Charge.

All as per item No here in before but 75mm bore pipe ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour for salt Glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed and testing ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia SWG pipe ; Complete all as specified and directed by Engineer - in - Charge.

Cutting into existing manhole for connecting new drain pipe of 150 mm bore and making good the pipe and rendering disturbed surface where drain pipe have been inserted cutting out existing benching for forming branch channel (1/2 round or 3/4 round as required) in cement concrete 1:2:4 type B1 and finished the surface even and smooth and reforming benching as required ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 25mm sand filling under/over floors or in foundations including watering and consolidation ; Complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Machine pressed pre-cast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment ; Complete all as specified and directed by Engineer - in - Charge.

ESS KAY BUILDER

Munish Kalia

m/s. gopal krishan