TP1-59/2025-26

Amount

Earthwork excavation for levelling the site in hard gravelly soil and deposting on bank with an initial lead of 10 mtrs. and lift of 2M In hard gravelly soil

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete. In hard gravelly soil

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete In medium rock and dense medium rock not requiring blasting.

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete Hard Rock requiring blasting&stacking

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete Removing hard rock by wedging and chiseling and trimming to proper shape where blasting is prohibited SR 39A

PCC 1:3:6 using 20mm HBG metal for foundation including cost of cement, without formwork all materials, labour, lead, lift etc. complete

PCC 1:2:4 using 12 to 20 mm HBG machine crushed metal for Chain link fencing cecasing all round the line with formwork including cost of cement all materials,labour,lead lift, curing etc., complete.

RR masonry in cm 1:5 for foundation and basement including cost of cement all materials, labour, lead, lift etc. complete

Refilling the foundation with excavated earth and consolidation as per standard specification with all lead, lift etc. complete

Supplying and filling in Good quality of gravel in layer of 150 mm thick well watering and consolidation including cost of earth, labour, lead, lift etc. complete for basement

RCC 1:1.5:3 using 12 to 20 mm HBG metal for plinth beam & Raft beam including cost of cement all materials, labour, lead, lift, curing etc. complete but excluding cost of steel reinforcement

Brick work in cm 1:5 using II class chamber burnt bricks of size 230x110x70mm for super structure including cost of cement, all other materials, labour, lead, lift etc. complete.

Brick work in cm 1:3 using II class chamber burnt bricks of size 230x110x70mm for partition wall including cost of cement, all materials, labour, curing lead, and lift etc. complete.

RCC 1:1.5:3 using 12mm to 20 mm HBG metal including cost of cement, all other materials, labour, curing cost of centering charges lead, lift etc. complete but excluding cost of steel reinforcement For Lintel

RCC 1:1.5:3 using 12mm to 20 mm HBG metal including cost of cement, all other materials, labour, curing cost of centering charges lead, lift etc. complete but excluding cost of steel reinforcement For Beam

RCC 1:1.5:3 using 12mm to 20 mm HBG metal including cost of cement, all other materials, labour, curing cost of centering charges lead, lift etc. complete but excluding cost of steel reinforcement For Columns (Varandah pillars) and for gate pillars

RCC 1:1.5:3 using 12mm to 20 mm HBG metal including cost of cement, all other materials, labour, curing cost of centering charges lead, lift etc. complete but excluding cost of steel reinforcement Sunshade(0.60m width)

RCC 1:1.5:3 precast slab for septic tank c slab and form work using 12 mm to 20 mm HBG metal & smooth finish including cost of all materials, labour, lead, lift etc. complete but excluding cost of providing steel reinforcement

Flooring with PCC 1:5:10, 100mm thick using 40mm HBG over wearing coat of PCC 1:2:4 – 20mm thick using 12mm jelly, finished smoothly with thread lined including cost of all materials labour, lead, lift etc. complete

Flooring with best quality of non-slippery Design ceramic tiles laid in cm 1:3, 20 mm thick and pointed with same colour cement over a bed of PCC 1:5:10, 100mm thick using 40mm HBG metal for bath and wc floors, and ladies toilet floor including cost of all materials, labour, lead, lift etc. complete (make: Johnson, Regency) flooring

Flooring with best quality of Vitrified tiles .6x.6 laid in cm 1:3, 20 mm thick and pointed with same colour cement over a bed of PCC 1:5:10, 100mm thick using 40mm HBG metal for control room and J.E room & verendah floors including cost of all materials, labour, lead, lift etc. complete (make: ISI STD) for flooring ( Johnson,Kajaria)

Flooring with best quality of Anti Acid non – slippery colour ceramic tiles laid in cm 1:3, 20mm thick and pointed with same colour cement over a bed of PCC 1:5:10, 100mm thick using 40 mm HBG metal for battery room floor, including cost of all materials, labour, lead, lift etc. complete. (make: Johnson, Regency)

Dadooing with approved quality of anti-acid colour ceramic tiles laid in cm 1:3 12mm thick and pointed with same colour cement for battery room from floor level including cost of all materials, labour, lead, lift etc. complete (make: Johnson, Regency)

Dadooing with approved quality of ceramic tiles laid in cm 1:3 12mm thick and pointed with same colour cement for bath & wc walls up to 1m from floor level including cost of all materials, labour, lead, lift etc. complete (make: Johnson, Regency)

RCC 1:1.5:3 using 12 to 20 mm HBG metal for roof slab and ceiling plastering with cm 1:3, 12mm thick including cost of all materials, labour, lead, lift etc. complete but excluding cost of steel reinforcement. Roof slab 125mm thick

RCC 1:1.5:3 using 12 to 20 mm HBG metal for roof slab and ceiling plastering with cm 1:3, 12mm thick including cost of all materials, labour, lead, lift etc. complete but excluding cost of steel reinforcement. Roof slab 150mm thick

Providing anti-termite treatment around the building and foundation including cost of all materials, labour, lead, lift etc. complete

Supplying and Filling the dispersion trench with river sand including including cost of all materials, lead, lift etc. complete

Supplying and Filling the dispersion trench with 40mm HBG metal including cost of all materials, lead, lift etc. complete

Providing steel reinforcement MS/RTS rod of size 16 mm and below including cost of binding wire, labour charges for cutting, bending, tying straightening fixing and placing in position including cost of all materials, lead, lift etc, complete.

Providing projected border 15 cm width, with cm 1:3, 20mm thick for plinth beam including cost of all materials, labour, load, lift etc. complete.

Providing projected border 7.5cm width in cm 1:3, 20mm thick at top of parapet wall, sunshade and control room inner walls including cost of cement all other materials, labour, lead, lift, etc. complete.

Flush pointing with cm 1:3 for RR masonry including cost of cement all materials, labour, curing, lead, lift, etc, complete

Plastering with cm 1:3, 12mm thick for partition walls cup board walls, steps including cost of cement and all materials, labour, lead, lift etc. complete.

Plastering with cm 1:5, 12mm thick for inside and outside the building including cost of cement all other materials, lead, lift curing etc. complete.

Supplying and fixing of 20mm thick polished cuddappa slab to be provided for the shelves of office room and store room including cost of all labour lead, lift etc. complete.

Providing and fixing in position of 110mm dia PVC down fall pipe of 4-kg/cm2approved quality with bends, shoes, clamps etc. as per specification including cost of all materials, labour, lead, lift etc. complete.

Supplying and fixing of polished cuddappa slab of size 0.30x0.30m for Bath &WC including cost of all materials, labour, lead, lift etc. complete.

Supplying and fixing of white glazed wash basin of size 550x400mm with all accessories such as Cast Iron Bracket,32 mm da CP waste coupling, Rubber Plug and chain,32 mm dia B class GI waste pipe,5mm dia GM wheel valve ,15mm and PVC pipe and 25mm dia mirror of size 600x450mm including cost of all materials, labour, lead, lift, etc. complete.

Providing 225mm width internal open drain with PCC1:4:8 concrete& plastered with cm 1:3, 12mm thick including costal cement& all materials, labour, lead, lift etc. complete

Providing sanitary fitting consisting of Hindustan/oriya type colour water colset of size 450x150mm with P trap connection and 100mm PVC Pipe, bends etc, complete as directed by the Engineer at site Water Closet with Oriya Pattern

Providing sanitary fitting consisting of Hindustan/oriya type colour water colset of size 450x150mm with P trap connection and 100mm PVC Pipe, bends etc, complete as directed by the Engineer at site Water closet for western type with flush out arrangements.

White washing two coats by using emulsion paint over primer coat with white colour for ceilings including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats inside walls using interior emulsion paint over a primer one coat and two coats of wall putty including cost of all materials,labour,lead,lift etc., complete

Colour washing two coats outside walls using Exterior emulsion paint over a primer one coat and two coats of all materials,labour,lead,lift etc., complete

Providing and laying weather proof Tils 300mmx300mm size over screed concrete1:3:6 with average thickness of 25 mm for required gradient and using best quality of one course of weather proof tils of approved quality using in CM 1:3, 12mm thick and using 3mm spacer and pointing with water Repellent U Bond and grout including cost of all materials, transport curing etc., complete.

Providing locking arrangements for bath& WC room ladies toilet with six lever godrej navatal lock with two keys including cost of all materials, lead, lift etc. complete.

Supplying and fixing of aluminium ventilator of size 600x400mm with all fittings including cost of all materials, lead, lifts etc. complete.

Supplying and fixing of 20mm dia PVC pipe of approved for water supply arrangements including cost of PVC pipes specials etc. labour charges for laying cutting jointing lead, lift etc. complete.

Supplying and fixing of 12mm dia brass screw down bib cock of approved make including cost of all materials, lead, lift etc. complete.

Writing the name of the substation and safety slogan in& out side of the control room building over plastered surface using approved colour and quality enamel paint over a coat of primer including cost of all materials, lead, lift etc. complete.

Providing and fixing 110mm dia ventilating shaft with PVC cowl on top fixing in position length of 3.5m cost of all materials, labour, lead, lift etc. complete

Transport and fixing in position of precast slab for covering the septic tank including cost of gap filling with cement mortar, labour, lead, lift etc. complete.

Supplying and fixing of 110mm dia pvc pipe for cable duct inside the control room building & septic tank connection including cost of all materials, lead, lift etc. complete

Supplying and fixing of anodized aluminium fully glazed door using 101.60 x44.45x2.10mm box section for outer frame, 53.70 x 44.50x2.30mm @1.238kg/m box door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 6mm clear glass including cost of alum clips rubber beedings alum fixtures such as tower bolt, pivot automatic hydroulic door closure brass mortice lock handle ok. Including cost of all materials, labour, leads, lift etc. complete. (1.20x2.40m size single leaf)

Supplying and fixing at anodized aluminiumdoor using 101.60x44.45x2.10 mm @1.608 kg/m box section for outer frame. 53.70x44.45x2.30 @ 1.238 kg/m door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 9mm thick regular grade pre laminated particle board & top panel with 5.5mm thick clear glass including cost of alum. Clips rubber beedings alum. Fixtures such as tower bolt, pivot brass mortice lock handle, etc. of approved quality including cost of all materials, labour, leads, lift etc. complete (1.00mx2.20msize single leaf)

Supplying and fixing in position of anodized Al. glazed sliding window of size 1.20 x 1.35m as per ISS 1038-1958 (1245 ISS) using Al. sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg/m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5.5mm tk sun cool glass including cost of all materials, lock arrangements labour, lead, lift, etc., complete.

Supplying and fixing in position of steel ornamental grills for window with flats of approved size and design with all fittings and furniture and paintings two coats of approved best quality of enamel paint over primary coat including cost of all materials, lead, lift etc. complete.

Supply and fixing of 4’40W twin mirror optic suspension type fitting (Phlips/Crompton/Wipro ) complete with louvers cover etc complete SD 96

Supply and fixing of slanting (or) straight holder with fancy shade (or) WT bulk head fitting for incondenscent lamp with CFL bulb etc. of approved quality and make. SD-81 (Phlips/Crompton)

Supply and fixing of 1 No. Horizontal type 4 way triple pole neutral MCB distribution Board sheet steel encloser with 40A 4 pole MCB isolater as incomming and 12 Nos 6 A to 32 Ams Sp MCB as outgoing in flush with wall and making good of the concealed portion all materials, lead, lift etc. complete.

Supply and fixing of 1200mm sweep Ac ceiling fan complete with regulator with 300mm down rod including fan clamp with side plate and cross arm conduit pipe of suitable length cost of all materials etc. complete SD 111

Wiring with 2x2.5 sq mm pvc insulated S.C unsheathed copper conductor of 1100 volt grade in suitable pvc rigid pipe on wall or ceiling with pvc accessories and with teak wood switch box and 5 Amps F.T switch with painting of suitable colour for open pvc light point and Fan point. SD22

Wiring with 2x1.5 sq mm pvc insulated S.C unsheathed copper conductor of 1100 volt grade in suitable pvc rigid pipe on wall or ceiling with pvc accessories with 150 x 100 x 113 mm Teak wood switch box for 5 Amps 3 pin non- interlocking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. SD - 34

Supply and fixing of 4’36 w fluorescent fitting of approved brand with (Philips/Crompton) with TW round block on wall or ceiling with tube with pvc unsheathed leads from terminal to the fittings.SD-87

Supply and fixing of 450 mm sweep AC exchaust fan complete with necessary fittings fixings in wall opening and making good of the wall etc. complete SD- 112

Supplying and fixing of emergency lamp of approved make including cost of all materials, lead, lift etc. complete

Supplying and fixing musical quartz type wall clock of of size 30 x 30 cm of approved quality such as Ajantha, Seiko, Citizen etc including cost of all materials, lead, lift etc. complete

Supplying and fixing of first aid box inside the control room building as per standard specification including cost of all materials, lead, lift etc. complete

Supplying and fixing of 1 No (250v HPSV lamp) sodium vapour lamp in front of control room building including cost of all materials, labour, lead, lift etc. complete

Supply and fixing of GI angle for Chain link fencing angle and cable duct angle and for steel hand rail with ornamental grill including cost of all materials ,all lead lift etc complete.

Supplying and fixing C.I. Manhole cover of size 600x600mm including cost of all materials labour lead and lift etc., complete.

Supplying and fixing in position of 1000 litres capacity PVC sintex tank of ISI make including cost of all materials transport charges GI nipple, GI Union etc complete

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification Upto 100 Mts

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification Beyond 100 Mts.

Supply and erection of 180mm (7”) dia rigid PVC casing pipe, having 6kg/cm² including cost all materials,lead, lift, re-boring the holes to required depth etc., complete with cover at the top of the bore well.

Supply and erection of 5 HP ELGI compressor (or) any other reputed make of pump having ISI make with 3phase suguna (or) any other approved make 400V/440/50 cycle motor (5 HP) having ISI make (or) as approved by the Board Engineer at site with air pipe of 20mm dia to pump water to a height of 175mts.and delivery unit with foot valve v-belt arrangement including cost of all materials, labour, erection charges, 5 HP, 400/440V L&T make starter to suit the compressor including the cost of all materials, labour, lead and as per the instruction of Engineer in charge at site complete in all respects.

Supply and erection of 3 phase 30/32 Amps ICTP switch with fuse arrangements to suit the compressor with cost of all materials, labour, lead and lift etc., complete in all respects.

Supply and erection of 40mm dia HDPE hose in black colour having ISI mark and as per IS 4984 -84,40mm dia (10 Kg/CM²) in and outside of the bore well including cost of all materials, labour, lead,lift etc., complete.

Supply and erection of 20mm dia HDPE hose in black colour and havingISI mark and as per IS 4984 - 87, (10 Kg/CM²) in and outside of bore well including cost of all materials, labour, lead, lift etc., complete.

Supply and fixing of 15 Amps main fuse carrier in T.W.Board (600x600mm) with hings,screw, hook wall varnished including cost of all materials, lead, lift etc., complete in all respects.

Supply and laying of 12mm G.I. pipe of medium class for air compressor cost of G.I pipe, specials, cutting, threading, labour, lead, lift as per the instruction of Engineer in charge at site.

Providing Anchor /Grip rod for foundation in the rock surface with drilling of 40 mm dia holes and fixing of 25 mm dia RTS rod 1.m length inside the holes and 1m length out side the holes with L shape bending including cost of all materials labour lead lift etc complete.

Conducting Water divining Test for fixing of Bore well point including cost of all hire charges of T&P and Transport charges etc complete.

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. S Type chair with nylon seated

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Three drawer steel table with Sunmica top of size 1200x750x750mm

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Steel side rack open type 1100x400x1200

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Steel half bench 36"x15"x18"

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Steel Stool 15"x15"x18"

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Steel Tray

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. PVC Nylon chair of approved quality

Supplying and fixing of Chain link fence for 1.80 m height

Supply and fixing of Gate light Fancy type including cost of all materials lead and lift etc complete.

CGST in % (For Bidders inside TamilNadu)

SGST in % (For Bidders inside TamilNadu)

IGST in % (For Bidders outside TamilNadu)

M. Kumar Contractor (BID ID -1434012)