KMC/EE/WS/GRWW/25-26/PH-II/54

SEQUENTIAL DISMANTLING OF ACTUATOR INCLUDING DISCONNECTIONS OF ALL THE ELECTRICAL LINES, GEAR BOX, WHEEL ETC OF 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW AND KEEPING THEM AT A SUITABLE PLACE INCLUDING ALL SORTS OF ALLIED WORKS, ALL COMPLETE, ADOPTING ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY ETC AND USING ALL SORTS OF MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

DISMANTLING, LIFTING ETC OF THE ENTIRE EXISTING 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW FROM THE EXISTING PIPE-BAY SEQUENTIALLY BY OPENING, DISMANTLING AND REMOVING OF THE EXISTING SCRAP HOLDING, OPENING AND DISMANTLING OF ALL THE NUTS, BOLTS ETC OF BOTH SUCTION AND DELIVERY SIDE AND KEEPING IT AT A SUITABLE PLACE, ADOPTING ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY ETC AND USING ALL SORTS OF MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

TRANSPORTATION OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 FROM CWPS-II, GRWW FROM GRWW TO MACHINE SHOP WITH FULL SAFETY TO AVOID ANY FURTHER DAMAGE INCLUDING LOADING & UNLOADING WITH THE ARRANGEMENT OF CRANE AND/OR TEPOY ALONG WITH ALL REQUIRED TOOLS AND TACKLES AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

DISMANTLING ALL COMPONENTS OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW PART BY PART, LIKE GLAND PUSHER WITH PACKINGS, TOP CHAIR, BEARING, TOP BONNET, GASKET, SS STEM, GM NUT, BODY SEAT RING, WEDGE SEAT RING, GUIDE SHOE, GUIDE CHANNEL ETC FOR THOROUGH SERVICING AND REPAIRING OF THE VALVE IN ALL RESPECTS ADOPTING ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY ETC AND USING ALL SORTS OF MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENT, SUPPORTS ETC AS PER SITE -REQUIREMENT AND DIRECTION OF THE EIC.

MAKING PATTERN FOR THE SEAT RING OF THE BODY OR THE WEDGE OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW FOR CASTING OF NEW RINGS, COMPLETE IN ALL RESPECTS IN CASE OF REQUIREMENT OF NEW ONE, INCLUDING ALL ALLIED WORKS, ALL COMPLETE, AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

CASTING OF SS 410 FOR THE SEAT RING OF THE BODY OR THE WEDGE OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW AND MACHINING, FINISHING AND MATCHING THE SAME AS PER SAMPLE IN ALL RESPECTS INCLUDING ALL SORTS OF ALLIED WORKS IN THE CASE OF REQUIREMENT OF NEW RING, ADOPTING ALL SORTS OF RQUIRED PRECAUTIONS, SAFETY ETC AND USING ALL SORTS OF REQUIRED MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

INSERTING AND FITTING-FIXING OF THE SEAT RING ON THE BODY OR WEDGE OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW PROPERLY FOR SMOOTH FUNCTIONING OF THE SAME AND COMPLETE IN ALL RESPECTS, ALL COMPLETE, ADOPTING ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY ETC AND USING ALL SORTS OF REQUIRED MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

MAKING PATTERN FOR THE GUIDE CHANNEL OF THE VALVE BODY OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW FOR CASTING OF GUIDE CHANNEL INCLUDING ALL SORTS OF ALLIED WORKS LAND COMPLETE IN ALL RESPECTS IN THE CASE OF REQUIREMENT OF NEW ONE AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

CASTING OF SS 410 FOR THE GUIDE CHANNEL OF THE BODY OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW AND PROVIDING, LAPPING AND FIXING OF GM SHEET WITH PROPER THICKNESS AND LENGTH IN THE ENTIRE INNER SIDE (U-SHAPE) AND MACHINING, FINISHING, MATCHING AND THE SAME AS PER SAMPLE IN ALL RESPECTS INCLUDING ALL SORTS OF ALLIED WORKS IN THE CASE OF REQUIREMENT OF NEW ONE, ALL COMPLETE, ADOPTING ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY ETC AND USING ALL SORTS OF REQUIRED MACHINES, INSTRUMENT, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

INSERTING AND FITTING-FIXING OF GUIDE CHANNEL ON THE BODY OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW PROVIDING ALL SORTS OF REQUIRED NUTS, BOLTS ETC, PROPERLY FOR SMOOTH FUNCTIONING OF THE SAME AND COMPLETE IN ALL RESPECTS, ALL COMPLETE, ADOPTING ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY ETC AND USING ALL SORTS OF REQUIRED MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

MAKING PATTERN FOR THE GUIDE SHOE OF THE WAGE OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW FOR CASTING OF GUIDE SHOE INCLUDING ALL SORTS OF ALLIED WORKS AND COMPLETE IN ALL RESPECTS IN THE CASE OF REQUIREMENT OF NEW ONES AS PER SITE REQUIREMENT AND DIRECTION OF THE EIC.

CASTING OF STAINLESS STEEL 410 FOR THE GUIDE SHOE OF THE WEDGE OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW AND PROVIDING, LAPPING AND FIXING OF GM SHEET WITH PROPER THICKNESS AND LENGTH IN THE ENTIRE OUTER SIDE(U-SHAPE) AND MACHINING, FINISHING, MATCHING THE SAME AS PER SAMPLE IN ALL RESPECTS INCLUDING ALL SORTS OF ALLIED WORKS IN THE CASE OF REQUIREMENT OF NEW GUIDE SHOE, ALL COMPLETE, AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

INSERTING AND FITTING-FIXING OF GUIDE SHOE ON THE WEDGE OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW PROVIDING ALL SORTS OF REQUIRED NUTS, BOLTS ETC, PROPERLY FOR SMOOTH FUNCTIONING OF THE SAME AND COMPLETE IN ALL RESPECTS, ALL COMPLETE, ADOPTING ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY ETC AND USING ALL SORTS OF REQUIRED MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

MANUFACTURING AND FITTING-FIXING OF NEW NUT (GM) OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW WITH MAKING SQUARE OF ACKME THREAD AS PER IS STANDARD, MACHINING, FINISHING AND MATCHING, AS PER SAMPLE AND COMPLETE IN ALL RESPECTS, INCLUDING ALL SORTS OF ALLIED WORKS, ALL COMPLETE, ADOPTING ALL SORTS OF PRECUATIONS AND SAFETY AND USING ALL SORTS OF MACHINES, INSTRUMENTS, ARRANGEMENTS, TOOLS & TACKLES ETC. AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

COMPLETE ASSEMBLY OF THE ENTIRE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW PART BY PART, INCLUDING PROVIDING REQUIRED NUTS & BOLTS (EN-8), GASKET ETC AND OTHER SPARE INCLUDING ALL SORTS OF ALLIED WORKS, ALL COMPLETE, ADOPTING ALL SORTS OF PRECUATIONS AND SAFETY AND USING ALL SORTS OF MACHINES, INSTRUMENTS, ARRANGEMENTS, TOOLS & TACKLES ETC. AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

PERFORMING HYDROSTATIC TESTS OF THE ASSEMBLED 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW AND COMPLETE IN ALL RESPECTS(NECESSARY TEST CERTIFICATE/S FROM THE COMPETENT AGENCY IS TO BE PROVIDED) INCLUDING ALL SORTS OF ALLIED WORKS, ALL COMPLETE, ADOPTING ALL SORTS OF PRECUATIONS AND SAFETY AND USING ALL SORTS OF MACHINES, INSTRUMENTS, ARRANGEMENTS, TOOLS & TACKLES ETC. AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

REPLACING THE EXISTING GASKET WITH NEW MATERIAL ASPER SAMPLE, THEN PLACING THE ENTIRE BONNET-UNIT ON THE BOTTOM PART (BODY) OF THE VALVE, TIGHTENING ALL THE NUTS-BOLTS ETC, REASSEMBLING AND RESETTING THE ENTIRE SCRAP HOLDING UNIT WITH ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY ETC AND MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

TRANSPORTATION OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW FROM MACHINE SHOP TO GRWW, KEEPING IT AT A SUITABLE PLACE WITH FULL SAFETY AND PRECAUTIONS INCLUDING LOADING AND UNLOADING WITH THE ARRANGEMENT OF CRANE AND/OR TEPOY ALONG WITH ALL REQUIRED TOOLS AND TACKLES AS PER SITE-REQUIREMENT AND DIRECTION OF THE EIC.

LIFTING, PUTTING AND INSTALLATION OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW IN EXISTING PIPE-BAY SEQUENTIALLY BY PROVING, INSERTING, TIGHTENING ETC OF THE REQUIRED SS NUTS, BOLTS, WASHER ETC OF BOTH SUCTION AND DELIVERY SIDES AND REASSEMBLING OF THE SCRAP HOLDING PART BY PART, INSERTING AND TIGHTENING OF ALL THE NUTS, BOLTS ETC OF THE SCRAP HOLDING,ADOPTING ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY ETC AND USING ALL SORT OF MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE -REQUIREMENT AND DIRECTION OF THE EIC.

INSTALLATION OF THE ACTUATOR INCLUDING CONNECTIONS OF ALL THE ELECTRICAL LINES, GEAR BOX, WHEEL ETC OF THE 750MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW AND INCLUDING REQUIRED GREASING AND ALL OTHER ALLIED WORKS, ALL COMPLETE, ADOPTING ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY ETC AND USING ALL SORT OF MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE -REQUIREMENT AND DIRECTION OF THE EIC.

TRIAL OPERATION OF THE 750 MM DIA ACTUATOR-OPERATED NON-RISING TYPE SLUICE VALVE, PN1.6 OF CWPS-II, GRWW AND OBSERVATION FOR 8 HOURS, INCLUDING RECTIFYING AND ADJUSTING THE REQUIRD PARTS, INCLUDING ALL SORTS OF ALIIED WORKS, ALL COMPLETE, ADOPTING ALL SORTS OF REQUIRED PRECAUTIONS, SAFETY AND USING ALL SORTS OF MACHINES, INSTRUMENTS, TOOLS AND TACKLES, ARRANGEMENTS, SUPPORTS ETC AS PER SITE -REQUIREMENT AND DIRECTION OF THE EIC.

Please Enable Macros to View BoQ information