SPL REPAIR TO BLDG NO P118 BY 1 TO 08 OR MD ACCN AT CIRCULAR ROAD AND DRAIN ALONGWITH MANEKSHAW INTEGRATED SPORT COMPLEX AND NURSING OFFRS MESS IN AGEA BRII UNDER GE DANAPUR CANTT

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed.

Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises all as specified.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

M&L for Non -Skid Ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm , in floors etc over and including15mm thick screed bed in cement mortar 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm & not exceeding 0.18 Sqm , in vertical surface such as skirtings, dados etc, over and including 10 mm thick cement plaster in cement mortar 1:4 fixing of wall tile set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm & not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed in cement mortar 1:6 set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface even & rough complete all as specified and directed.

M&L for Coloured glazed ceramic tiles (450 x 300)x 6 to 7mm thick (digital type) on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar 1:4 all as specified and directed for shade, pattern and laying of tiles complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4) in half bricks wall complete all as specified and directed

M&L PCC 1:4:8 type D-2 (40mm graded agg) in fdn, sub base, mass concrete & cinder concrete etc. complete.

M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed

M&L PCC 1:2:4 type B1 20mm graded stone aggregates for insertion of hold fasts including necessary form works complete all as specified and directed.

M&L for providing precast cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone agg) for landings, chajjas, shelves cover slab for man holes and similar articles with plain faces etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick wall in cement mortar (1:6) finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

M&L rendering 5 mm thick in cement mortar (1:3) on ceiling finished surface even and smooth without using extra cement, complete all as specified and directed.

Supply only water proofing compound (liquid),ISI marked complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

All as per above item No 21.00 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed

S & F of 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.

S & F for Flush shutters 35 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer with including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed.

~Ditto~ all as per Srl item No. 27.00 above but without glazing bar

S & F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing with and including, fixing of hold fast size 25 x 5 mm of flat iron etc and over including one coat of primer complete all as specified and directed.

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed.

S & F pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed.

S & F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar work including necessary form work as required complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter & kitchen cupboard shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2010 print) on serial page No. 161 complete all as specified and directed.

SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 75 mm complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.

S&F mild steel, 300mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F 100mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F Aluminium handles, cast type, anodized 150 mm size comp ISI Marked complete all as specified and directed

S&F Aluminium handles, cast type, anodized 100 mm size comp ISI Marked complete all as specified and directed

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete as directed by Engr-in-charge

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including MS butt hinges, medium weight, cold rolled 50mm long, articles n exc 200 Cu cm each of Ist class soft wood complete all as specified and directed..

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete.

S&F 3 mm thick sheet glass, ordinary quality, and glazing with oil putty in square/rectangle n exc 0.50 sqm in each pane, complete all as specified and directed

~Ditto~ all as per Srl item No 51.00 above but figured glass. complete all as specified and directed

S&F in repair 18/19 mm thick Block baords, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F in repair mild steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour as approved complete.

S&F mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed to walls and ceilings or laid in floors of 15 mm dia including cutting /chasing in walls etc complete all as specified and directed.

S&F tubes medium grade galvanized with all fittings and fixed to walls and ceiling or laid in floors of 20mm bore complete all as specified and directed.

Fixing only 15 mm bore galvanised steel water tubing medium grade with and including all new fittings and fixed to walls and ceilings or laid under floors, including cleaning for re-fixing of old pipe complete all as specified and directed. Note:- Old pipe shall be used retrived from item Srl No. 57.00.

Fixing only 20 mm bore galvanised steel water tubing medium grade with and including all new fittings and fixed to walls and ceilings or laid under floors, including cleaning for re-fixing of old pipe complete all as specified and directed. Note:- old pipe shall be used retrived from item Srl No. 58.00

S&F in repair vitreous china wash hand basin size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC) complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and directed .

S&F in repairs PVC connections 15 mm dia size and 450mm long with 2 Nos check nuts its washer complete all as specified and directed.

S&F in repairs Bib taps, cast copper alloy, chromium plated , screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specified and directed.

Supply and fixing in repair 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair Brass CP towel rail 20mm dia `D' type 60 cm long between flanges complete all as specified and directed.

S&F in repairs stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed.

S & F as in repair 15 mm dia angle cock, chromium plated, cast copper alloy, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair of stainless steel soap dish, of standerd size and shape complete all as directed

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete.

S & F in repair brass chromium plated shower rose fancy type with swivel joints ,125 mm dia with CP arms 300 mm long including fixing to steel pipe or union complete all as specifiedand directed.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specifiedand directed..

M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed .

M&L for 18 to 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F MS TMT bars, 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches of 110 mm dia complete all as specified and directed.

~Ditto~ all as per Srl item No 82.00 above but 75 mm bore complete all as specified and directed.

~Ditto~ all as per Srl item No 82.00 above but 50 mm bore complete all as specified and directed.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete.

M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

~Ditto~ all as per Srl item No 90.00 above but 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia etc complete all as specified and directed..

Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and complete all as specified and directed..

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity including CP tank nipple complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Removing old paints by paint remove or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.

M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty including preparation of new surface complete.

M & L for two coats of OBD on ceiling over a coat of primer of surfaces complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed .

Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed.

M&L for two coats of weather coat paint over a coat of primer on new surfaces on wall including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete.

Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(IWPC will be paid separately)

M&L PCC type C2, 1:3:6 (40 mm graded aggregate) as in sunken slab filling complete all as spd and as directed

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M & L for Brick work with sub class ‘B’ old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

~Ditto~ all as per item No 123 above but except bricks complete all as specified and directed. Note :- Old bricks obtained from item No 09 shall be re-used after cleaning.

M & L for plain cement concrete, (1:2:4) Type B-1 (using 20 mm graded stone aggregate) as in copings, kneelers, apex stones, bed plates, water troughs and throating as directed including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B1(using 20mm graded stone aggregate) as in benching and surface channel of drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement including using extra cement including forms, moulds etc complete all as specified and directed.

Add or deduct in item No. 127.00 above for each 25 mm girth or part thereof over or under 30 cm ditto

M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth using extra cement complete all as specified and directed.

Demolition and breaking up unserviceable reinforced concrete pipes any size set in cement mortar including hunching concrete against the side of concrete pipes complete all as specified and directed.

M&L for laying 450mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for laying 600mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's with MCB and making good the disturbed surfaces of walls complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed.

M&L Point wiring complete with cable PVC, insulated, unsheathed, 1100 volts grade conforming to IS-694, 1.5 Sq mm (nominal area) FRLS stranded with copper conductor single core drawn through and including non metallic rigid PVC conduit 20mm dia,medium grade and conduit accessories concealed wiring system by cutting of wall and making good in walls disturbed surface, with sunken type pressed steel/welded MS terminal boxes not less than 1.6mm thick MS Sheet concealed in wall with hold fasts duly painted with two coat of black bituminious paint over a coat of red oxide, 3 mm thick laminated sheet cover for mounting of fittings like switches, socket outlets, regulators etc., including a run of PVC insulated unsheathed 1.5 Sq mm FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following: -

One light/ fan point controlled by one, one-way switch, SP, 5 Amps complete all as specified & directed.

One light point controlled by two way switch complete all as specified & directed

One bell / buzzer point controlled by one push button complete all as specified & directed

One 5 pin 5 Amps socket out let point on the same board with other switches complete all as specified & directed

One switch socket outlet, 5 pin, 5 Amps, SP, on independent board complete all as specified & directed.

~Ditto~ All as per item No. 136.00 above but with 2.5 Sq mm cable for One 3 Pin, 5/15 Amps switch socket outlet on independent board complete all as specified and directed.

S&F Switch Piano, flush type, single pole, one way, 5 Amps, 240 Volt grade, ISI marked complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed.

S&F Switch Piano, flush type, single pole, one way, 15 Amps, 230 Volt grade, ISI marked complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified & directed.

S&F Switch Piano, flush type, single pole, two way, 5 Amps, 230 Volt grade, ISI marked complete all as specified and directed.

S&F bell push single pole one way 6 Amp 240 volts, flush type complete all as specified & directed.

S&F ceiling rose surface bakelite 63.50 mm dia, three terminals, complete all as specified & directed.

S&F lamp holder insulated body with back plate for batten/ angular fitting complete all as specified & directed.

S&F LED lamp 7/8/9 watt complete all as specified and directed.

S&F electronic Fan regulator 450 watt step type complete all as specified and directed.

S&F Bell multi music type AC 230 Volts,single pole complete all as specified and directed.

Supply and fixing Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, triple pole and neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete all as specified and as directed. Make : Legrand/Schneider/Siemens/L&T.

Supply and fixing Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole and neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete all as specified and as directed. Make : Legrand/Schneider/Siemens/L&T

Supply and fixing MCB SPN 5 to 32 amps 10 KA, C-series including connection complete all as specified and directed. Make : Legrand/Schneider/Siemens/L&T.

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection complete all as specified and directed by Engr-In-Charge. Make : Legrand/Schneider/Siemens/L&T.

Supply and fixing MCB TPN 50 to63 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge. Make : Legrand/Schneider/Siemens/L&T.

S&F in LED tube light fitting batten type single tube 1x 18/20 watt 230 volt wall/ ceiling mounted luminaire industrial type made of sheet metal box type suitable for T- 8 tube complete with electronic driver and bipin holder including one No tube 18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make of tube light fitting- Havells Cat No: REGALBATTENT8UPTO1X22WDSBSWH or equivalent model of Bajaj / Wipro/Crompton Greaves Make of Tube:- Havells Cat No. CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bajaj/Philips/ CG.

Supply and fixing in repair Wall light fixture lantern made up of polycarbonate ; suitable for LED 9 watt ,compleate with LED 9 watt lamp, spiral B-22 base including connection with all necessary accessories complete all as specified and directed. MAKE : Havells Cat Part No. LHDLO2160099 or equivalent of Bajaj / Philips.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell's Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG/Philips.

Supply and fixing LED security light fitting 25 watts capacity 240 volts 50 Hz IP-66 protection and impact resistance of IK-07 including all accessories such as driver, SPD etc complete with GI pipe light grade 43 mm dia bracket of size minimum length 0.80 mtrs with suitable clamp for fixing to wall complete all as specified and as directed. Make:Havell's cat No-ENDURAPEARLSL25WLED757SASYTOPCMP or equiv. of CG / Bajaj/ Philips..

M&L for CPRI approved factory made sheet metal box made out of 2 mm thick MS sheet of size 600 X 900 X 200 mm with single door hinged shutter and locking arrangement for fixing DBs, KWH Metter etc flashed / grouting on wall incl painting with two coated of powder coated paint over a coat of red oxide primer with suitable glass vision panel of each meters shall be provided in the door to easy meters reading , including taking down the old one complete all as specified & directed. .

Taking down ceiling fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 form ceiling rose to fan terminal over hauling the fan complete all as specified and as directed

S&F high performance metal body exhaust fan 300 mm sweep 900 RPM 240 volts, AC 50 Hz, heavy duty with suitable size MS sheet louver including connecting up to ceiling rose/ connector by three core sheathed copper cable of suitable size including cutting wall and making hole in round shape of suitable size making good the disturb suface to its original specification from both inner snd outer side of wall and four Nos suitable size nuts, bolts and washer with proper grouting in wall complete all as specified and directed. MAKE :- Havells cat part No. Ventil Air - DS or equivalent modle of Crompton Greaves / Usha

M&L sub main wiring with 2 run of 4.00 sqmm (nominal cross-sectional area) PVC insulated (FRLS) unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor including one run of 2.50 sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed cable with stranded copper conductor as continuous earth wire connected in common earth dolly drawn in PVC rigid non- metallic conduit complete all as specified and as directed. (NOTE : (i) PVC non rigid nonmetallic conduit shall be measured & paid separately under relevant item of this Schedule ‘A’. (ii) Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length). Make of cable:-Polycab/Havell's/ Finolex

M & L for 25 mm dia PVC conduit having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification) with all accessories for submain wiring cable complete as directed. Make of Conduit :- Plaza/Kalinga Premium/AKG.

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 40mm bore upto 5m lenght for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 5 of MES schedule 2009 part-I and connected complete all as specified including testing on completion

M/S MODERN CONSTRUCTION

M/S Priya Trading Agency