Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC NIZ CHABUA P O P S CHABUA DIST DIBRUGARH PIN 786184 ASSAM | DIBRUGARH | ASSAM | 786184 | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹16.9 L+₹1.3 L (8.28%)Rejected-Finance NO 1 RANGAJAN VILLAGE PO BOKULONI CHARIALI MAUZA TIPLING SUB DIVISION TENGAKHAT DIST DIBRUGARH ASSAM 786191 | DIBRUGARH | ASSAM | 786191 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹17.6 L+₹2.0 L (13.1%)Rejected-Finance JUNAKI NAGAR WARD NO 08 PO SILAPATIHAR DIST DIEMAJI ASSAM | L3 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹14.4 L
EMD Value
₹28,800
Closing Date
8 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
PROVN OF BATHING AND WASHING POINT WITH CONNECTED ITEMS AND PROVN OF TOILET BLOCK NEAR BLDG NO T-85/2 AT TEZU UNDER GE LEKHAPANI
2023_MES_608642_1
8744/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
9 documents required · 9 mandatory
₹500
GE LEKHAPANI
₹28,800
Yes
28 Sept 2023
11 Jul 2023
15 Aug 2023
11 Jul 2023
8 Aug 2023
25 Jul 2023
Amount
Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundations,manholes,laying cables,pipe lines,etc and getting out in soft/ loose soil complete all as specified and directed.
All as per Item No.2 above,but depth exc 1.5 m and n exc 3 m depth complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil,complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum,getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L PCC (1:4:8) type D-2, (using 40mm graded stone aggregate) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L PCC ( 1:3:6) type C-2 (using 40 mm graded stone aggregate), as in foundations, bed concrete,filling sub base, surface channels and mass concrete,etc complete all as specified and directed.
M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in slabs, supported on walls beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,in shelves and the like including slabs of septic tank, soak well etc complete all as specified and directed
M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.
M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in cover slabs for manholes,septic tanks,soak wells, etc and set in CM (1:4) with plain fair faces incl chamfered, weathering, throating etc incl necessary form work complete all as specified and directed.
M&L PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in cills, seismic and other similar bands, plinth courses, copings, bed plates and similar articles including weathering, slightly rounded or chamfered angles and throating as directed with necessary form work,complete all as specified and directed.
M&L Providing PCC(1:2:4) type B1, (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges and other similar bands including use of formwork complete all as specified and directed.
Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
Use of waste of formwork to soffits of suspended slabs such as roof slabs, landings and simlar work not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM (1:6) complete all as specified and directed.
M&L Loose filling with broken brick aggregates of gauge 80 to 150 mm in soakage pit, soak well etc complete all as specified and directed
S&F Steel ventilators fixed type complete with glazing bars dovtailed or welded,etc complete all as specified and as directed.
M&L Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ S & F Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.
S&F 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified & as directed.
S&F 150 mm size aluminium handles, cast type, anodized and fixed complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5sq. m in each pane complete all as specified and as directed.
S&F Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with steel wire staples complete all as specified and directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per Item 28 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,etc complete all as specified and directed.
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated Plain steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in Evas roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.11 sqm but not exceedin 0.18 Sqm as in floors, etc. and set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
M&L for 300mm x 300mm heavy duty out door ceramic tiles 9 to 10mm thick (Capsule , Star or coin Pattern) in floors etc over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including levelling course of 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.
M&L Glazed coloured ceramic tiles of size 300x450x 7mm thick, as in vertical surfaces such as skirting,dado,etc and set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over and including 10 mm thick rendering as in backing wall plaster in CM (1:4) complete all as specified and directed.
M & L 50 mm thick PCC (1:3:6) type C-2, (using 40 mm graded mechanically crushed stone aggregates) as in plinth protection / pavings/shafts laid in 1:20 slope including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm, complete as specified and directed.
M & L for Chequered cement concrete tiles cast in rubber moulded glossy finish of approved colour general purpose double layer of size 25cm x 25cm x 22mm thick with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry in floor incl layer over 15mm thick bedding of CM (1:6) complete all as specified and as directed
S&F Granite 15 to 17 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 15 mm thick bedding in CM (1:4) including pointing in white cement using marble dust (1:2) with admixture of pigment to match with shade of granite,complete all as specified and directed.
M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed.
M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finishing fair and even complete all as specified and directed.
M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L Prepration of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed.
S&F 15 mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F 20 mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F Vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of P or S trap embedded in cement concrete bedding,etc complete all as specified and directed.
S&F vitreous China counter wash hand basin, white, (565 x 465 x 185mm) fixed in granite counter by making suitable size hole, including PVC waste pipe, complete, all as specified and directed. Note:- Granite counter will be measured & paid separately. Make: Cat Part No C0483 of Parryware or equivalent model in Cera/Hindware as approved by GE.
S&F, Wash basins white, vitreous China, flat back, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified and directed.
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.
S&F 40 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqm as in waste water pipes complete fixed all as specified and directed.
S&F 32 mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixed complete all as specified and as directed.
S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets,etc complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F 15 mm dia Bib taps,fancy type long body cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified and directed.
S&F 15 mm dia pillar taps,fancy type swan long neck suitable for countershunk basin, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe & fixed complete all as specified and directed.
S&F 15 mm bore dia angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks of 500 Ltrs capacity,(cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part-I & as directed.
S&F Rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity,(cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part-I & as directed.
S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed.
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laying in trenches/floors complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laying in trenches/floors complete all as specified and as directed.
S&F PVC (SWR) bends 110mm dia any radius all as specified and directed.
S&F PVC (SWR) bends 75mm dia any radius all as specified and directed.
M & L for concealed point wiring complete with 1.5 sq mm FRLSH, PVC insulated multistranded flexible copper conductor two single core cable 1100 volts grade,drawn into non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of PVC insulated and unsheathed multistranded flexible copper conductor cable 1.5 Sqmm for each continuity and connected to Common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet conccealed in wall and laminated sheet cover of 3mm thick on top for housing the switches socket, outlet etc for one light fan point controlled by one one way 5 Amp switch, complete all as specified and directed by Engineer-in-Charge
All as per Item No.69 above,but One Exhaust fan point controlled by one , one way 5 Amp switch complete all as specified and directed.
S&F Switch piano flush button, single pole, one way 5 Amp complete all as specified and directed.
S&F Ceiling rose surface type bakelite 65x50mm three terminal all as specified and directed.
S&F LED tube light fitting PC body integrated batten type with built in LED chip & integral driver 20 watt, channel housing & diffuser of lingth 1200 mm (approx) with all accessories internally pre-wired and fixed to walls/ceiling including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F LED building security light fitting 25W made up of prssure die cast housing with toughened glass and high power LED with secondary optics & IP66 protection complete with mounting bracket, 02 x MS Flat size 40x3 mm clamp set, nut/bolt/washers etc all accessories internally pre-wired and fixed to walls complete all as specified and directed.
S&F DB,SPN wall mounting type,240 Volts, 2 Way with 200 Amps rated bus bar, single door suitable for fixing MCB's including connecting etc complete all as specified and directed.
S&F MCB SPN 32 Amps, 230 volts AC and connecting using suitable size of wire all as specified and directed.
Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15 cm above the cable all as specified and directed. Note: Punned thickness shall be measured for payment purpose.
Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable complete all as specified and directed.
Supply and laying GI pipe, 40 mm bore (light grade) in trenches/under floors or roads or along the pole incl clamp with suitable nuts & bolts for protection of cables complete all as specified and directed.
Supply,laying and testing of LT XLPE cable, insulated, screened PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of cross sectional area 10 sqmm 2 core laying or passing through pipe/wall/floor/trenches complete all as specified and directed.
S & F Exhaust fan 300 mm sweep , 1400 RPM,heavy duty metal body and connecting the same to ceiling rose with using copper conductor flexible twisted three core cable ,and fixing to walls / roof complete all as specified and directed
M&L Cutting existing steel tubing for alteration or addition (each cut measured ) bore of pipe 40 mm / 50 mm /80mm complete all as specified and directed.
M&L Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.
S&F GI water tubing, 25 mm dia (medium grade) including fittings/accessories like sockets, bend, elbow, union etc laying in trenches/wall/road complete all as specified and directed.
S&F GI water tubing, 20 mm dia (medium grade) including fittings/accessories like sockets, bend, elbow, union etc laying in trenches/wall/road complete all as specified and directed.
M&L Gunmetal globe/gate valve of size 25 mm bore, ISI marked, with iron wheel head, screwed both ends complete all as specified and directed.
M&L Gunmetal globe/gate valve of size 20 mm bore, ISI marked, with iron wheel head, screwed both ends complete all as specified and directed.
M & L Brick valve chamber of internal size 90 cm x 90 cm x 90 cm by using brick masonry with with 23 cm thick wall in CM (1:6) including excavation, earth work in any strata,75 mm thick PCC (1:4:8) foundation type D-2 (using 40 mm graded stone aggregate), including 20 mm thick PCC (1:2:4) type B1(using 20 mm graded stone aggregate) on top of brick walls and plastering the internal and external surfaces with 10 mm thick CM (1:4), providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with40x40x6mm angle iron frame duly painted with two coast of black bituminous paint over one coat of red oxide primer complete all as specified and directed by Eng-in-charge.
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 (using 20 mm graded stone aggregate) for earth pit and 40 mm thick pre-cast RCC cover by using RCC (1 : 2 : 4) type B1 (using 20 mm graded stone aggregate) with 3 Nos 8 mm dia TMT bars both ways,etc and testing on completion complete all as specified and directed by Engineer-in-Charge.
M/S SINGH TRADERS
SAHASRA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .